NH WTB SWB Bed or bed sides - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**CUSTOM/10** · 03-21-2013, 11:57 AM

Yah I know, So does everyone else !!! "LOL"

But I have a friend that drives a Tractor Trailer cross country so I can arrange to have large items picked up !

So out west & down south are the target areas. ( Not up north )

I'm looking for SWB Fleet bed sides ( 69-72 want side marker openings ) or a complete bed, Must be very nice, no rust issues. Small dents but no major damage. ( NOS bed sides are also an option )

Let me know what you got, how much $$$ and where your located !!!

Gary

**CUSTOM/10** · 03-21-2013, 06:55 PM

Someone must have a bed or bed sides !

ZOOKEENEY · 03-21-2013, 08:46 PM

Let me check around for you. I just sold a pair and might can get my hands on some more.

**CUSTOM/10** · 03-22-2013, 06:56 AM

Eric;

That would be great !

I have everything other than good bed sides, and sides would be easier to transport, but can also do a complete bed.

Thanks
Gary

**CUSTOM/10** · 03-23-2013, 07:30 AM

Still looking !

Sammy · 03-23-2013, 10:24 AM

There was a guy in south eastern Mo. I met at a swap meet that had a pair of repop SWB sides for a grand. Never installed in cardboard boxes. Too far north for you? I can find the number my son has it on his phone.

GMC Pauls sells them for $825 a pair plus shipping so guess that is a bit high.

**CUSTOM/10** · 03-23-2013, 03:17 PM

Thanks Sammy, But right now I'm looking for original GM stuff if I can find it.
I've heard mixed results about the repop bed sides. I will go with repops when the time comes if I don't have any luck finding good GM sides.

Gary

Sammy · 03-23-2013, 06:30 PM

Np. Best bet would be on the west coast or Az. TTT

rkintn_68 · 03-23-2013, 09:14 PM

http://67-72chevytrucks.com/vboard/s...d.php?t=568162

http://67-72chevytrucks.com/vboard/s...d.php?t=560122

**CUSTOM/10** · 03-24-2013, 06:38 PM

Ttt

sduckworth13 · 03-24-2013, 08:48 PM

Got a guy here in Kansas City that has a pair. Good luck.
http://kansascity.craigslist.org/pts/3583194552.html
Posted via Mobile Device

dhart · 03-24-2013, 10:04 PM

I have a pair of very nice bedsides, I bought them for an extra set for my truck but I sold it and am about to sell the other rust free builder I have. Let me know if you are interested and I will send you some pics, located in Memphis Tennessee.
901-553-2439

**CUSTOM/10** · 03-25-2013, 06:59 AM

Yes I'm interested !

If you could send some pictures to me that would be great.

martinfamily72@comcast.net

Thanks !
Gary

**CUSTOM/10** · 03-26-2013, 07:32 AM

TTT

Have some posibilities, but I'd still like to see what else is out there !

Dwayne : Looking forward to seeing some Pics. Thanks.

Gary

brewtality · 03-26-2013, 01:35 PM

Sent you a PM
Posted via Mobile Device

Wootdog · 03-27-2013, 12:28 PM

Custom 10.
I saw this on hampton roads craigslist. you may want to call them. It is in the Northern Tidewater area of Yorktown.
Kerry

http://norfolk.craigslist.org/pts/3685563978.html

sduckworth13 · 03-27-2013, 01:17 PM

I want to know where the guy that posted the craigslist ad is finding bedsides for $370.00 last time I checked they run (edit) $475.00 a panel. Good thing he didn't know that they are more expensive.

**CUSTOM/10** · 03-27-2013, 01:22 PM

Thanks for the link Kerry, but I'm hoping to find some with the side markers, don't realy want to cut & weld them in.

Scott; I was thinking the same thing, I haven't seen them for that price !

03-21-2013, 11:57 AM	#1
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,854	WTB SWB Bed or bed sides Yah I know, So does everyone else !!! "LOL" But I have a friend that drives a Tractor Trailer cross country so I can arrange to have large items picked up ! So out west & down south are the target areas. ( Not up north ) I'm looking for SWB Fleet bed sides ( 69-72 want side marker openings ) or a complete bed, Must be very nice, no rust issues. Small dents but no major damage. ( NOS bed sides are also an option ) Let me know what you got, how much $$$ and where your located !!! Gary __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859 Last edited by CUSTOM/10; 03-21-2013 at 01:12 PM.

03-21-2013, 06:55 PM	#2
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,854	Re: WTB SWB Bed or bed sides Someone must have a bed or bed sides ! __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859

03-21-2013, 08:46 PM	#3
ZOOKEENEY Registered User Join Date: Feb 2007 Location: Bangs,TX Posts: 246	Re: WTB SWB Bed or bed sides Let me check around for you. I just sold a pair and might can get my hands on some more. __________________ Eric K

03-22-2013, 06:56 AM	#4
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,854	Re: WTB SWB Bed or bed sides Eric; That would be great ! I have everything other than good bed sides, and sides would be easier to transport, but can also do a complete bed. Thanks Gary __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859

03-23-2013, 07:30 AM	#5
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,854	Re: WTB SWB Bed or bed sides Still looking ! __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859

03-23-2013, 10:24 AM	#6
Sammy Registered User Join Date: Apr 2000 Location: Bonne Terre, Mo Posts: 3,005	Re: WTB SWB Bed or bed sides There was a guy in south eastern Mo. I met at a swap meet that had a pair of repop SWB sides for a grand. Never installed in cardboard boxes. Too far north for you? I can find the number my son has it on his phone. GMC Pauls sells them for $825 a pair plus shipping so guess that is a bit high. __________________ '69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629" Last edited by Sammy; 03-23-2013 at 10:30 AM.

03-23-2013, 03:17 PM	#7
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,854	Re: WTB SWB Bed or bed sides Thanks Sammy, But right now I'm looking for original GM stuff if I can find it. I've heard mixed results about the repop bed sides. I will go with repops when the time comes if I don't have any luck finding good GM sides. Gary __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859

03-23-2013, 06:30 PM	#8
Sammy Registered User Join Date: Apr 2000 Location: Bonne Terre, Mo Posts: 3,005	Re: WTB SWB Bed or bed sides Np. Best bet would be on the west coast or Az. TTT __________________ '69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629"

03-23-2013, 09:14 PM	#9
rkintn_68 Registered User Join Date: Sep 2012 Location: clarksville tn Posts: 806	Re: WTB SWB Bed or bed sides http://67-72chevytrucks.com/vboard/s...d.php?t=568162 http://67-72chevytrucks.com/vboard/s...d.php?t=560122 __________________ 72 GMC K 1500 SWB W/ 68 CHEVY FR/CLIP -- SOLD 70 CHEVY C/10 LWB x 2 ----- SOLD 67 CHEVY SWB IN PROGRESS " ALMOST HEAVEN " Build thread : http://67-72chevytrucks.com/vboard/s...15#post6826315

03-24-2013, 06:38 PM	#10
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,854	Re: WTB SWB Bed or bed sides Ttt __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859

03-24-2013, 08:48 PM	#11
sduckworth13 Registered User Join Date: Mar 2011 Location: Kansas City, Missouri Posts: 3,541	Re: WTB SWB Bed or bed sides Got a guy here in Kansas City that has a pair. Good luck. http://kansascity.craigslist.org/pts/3583194552.html Posted via Mobile Device __________________ Scott

03-24-2013, 10:04 PM	#12
dhart Registered User Join Date: Dec 2009 Location: Memphis TN Posts: 102	Re: WTB SWB Bed or bed sides I have a pair of very nice bedsides, I bought them for an extra set for my truck but I sold it and am about to sell the other rust free builder I have. Let me know if you are interested and I will send you some pics, located in Memphis Tennessee. 901-553-2439

03-25-2013, 06:59 AM	#13
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,854	Re: WTB SWB Bed or bed sides Yes I'm interested ! If you could send some pictures to me that would be great. martinfamily72@comcast.net Thanks ! Gary __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859

03-26-2013, 07:32 AM	#14
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,854	Re: WTB SWB Bed or bed sides TTT Have some posibilities, but I'd still like to see what else is out there ! Dwayne : Looking forward to seeing some Pics. Thanks. Gary __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859

03-26-2013, 01:35 PM	#15
brewtality Registered User Join Date: Apr 2011 Location: Holland, MA Posts: 57	Re: WTB SWB Bed or bed sides Sent you a PM Posted via Mobile Device



Register or Log In To remove these advertisements.

03-27-2013, 12:28 PM	#16
Wootdog Senior Member Join Date: Jan 2001 Location: Virginia Beach, Va, USA Posts: 1,683	Re: WTB SWB Bed or bed sides Custom 10. I saw this on hampton roads craigslist. you may want to call them. It is in the Northern Tidewater area of Yorktown. Kerry http://norfolk.craigslist.org/pts/3685563978.html __________________ 1967 C10 Got it back after three years Boy I sure missed Peppy 1969 Chevelle 1990 IROC Z Convertible 2002 Silverado LT

03-27-2013, 01:17 PM	#17
sduckworth13 Registered User Join Date: Mar 2011 Location: Kansas City, Missouri Posts: 3,541	Re: WTB SWB Bed or bed sides I want to know where the guy that posted the craigslist ad is finding bedsides for $370.00 last time I checked they run (edit) $475.00 a panel. Good thing he didn't know that they are more expensive. __________________ Scott

03-27-2013, 01:22 PM	#18
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,854	Re: WTB SWB Bed or bed sides Thanks for the link Kerry, but I'm hoping to find some with the side markers, don't realy want to cut & weld them in. Scott; I was thinking the same thing, I haven't seen them for that price ! __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859 Last edited by CUSTOM/10; 03-27-2013 at 01:32 PM.

Register or Log In To remove these advertisements.