What price would you offer ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Grizz1963 · 03-30-2013, 04:42 AM

NO IDEA ABOUT LOGISTICS

It is in Ventura

And I am interested at this point.

My questions are these.....

Hope some of you have the answers.

It seems to be on a newer GMC Long Fleet truck.

What are the size differences between a loadbody like this and a 60-66 Fleetside dimensions ?

I was wondering if there is a universal size, or if these were custom sized and fitted to trucks.

WHAT WOULD ONE OFFER FOR ONE OF THESE ??

Seller asked me to make an offer.

Any help will be appreciated.

It could look like this.

thebeast61 · 03-30-2013, 05:40 AM

I cant help you with the price, but that camper is cool. I have never seen one like that.

72freak · 03-30-2013, 06:46 AM

Size should be about the same. If you are going to have it transported ,look into buying the entire rig if possible. It will make it easier for the transport person to haul. $300 to $400 max for the camper. You can part out or sell the truck once it gets to you.

72freak · 03-30-2013, 06:51 AM

UPDATE......guys, Is that a LONGHORN? I cant tell from the angle/// If it is, it wont fit. Too long.

Get the owner to put a tape on it.

And yes, I know a GMC isnt called a Longhorn.

tincan1966 · 03-30-2013, 07:38 AM

Quote:

Originally Posted by 72freak

UPDATE......guys, Is that a LONGHORN? I cant tell from the angle/// If it is, it wont fit. Too long.

Get the owner to put a tape on it.

And yes, I know a GMC isnt called a Longhorn.

Good call on the "Longhorn" ! I agree- it looks like there is a seam at the front fo the bedside that would be consistent with the Long Horn or "Sierra Grande' model. If that's the case, it will be longer, and that camper would even be more rare!

jonzcustomshop · 03-30-2013, 08:37 AM

Quote:

Originally Posted by 72freak

UPDATE......guys, Is that a LONGHORN? I cant tell from the angle/// If it is, it wont fit. Too long.

Get the owner to put a tape on it.

And yes, I know a GMC isnt called a Longhorn.

Quote:

Originally Posted by tincan1966

Good call on the "Longhorn" ! I agree- it looks like there is a seam at the front fo the bedside that would be consistent with the Long Horn or "Sierra Grande' model. If that's the case, it will be longer, and that camper would even be more rare!

but also looking at the pic of the rear, it sits in a bit, where the yellow 60-66 is flush... tape measure is best though...

**joedoh** · 03-30-2013, 09:54 AM

definitely fits the longhorn theory if you read this website http://www.oldchevytrucks.com/blog/i...1972-longhorn/

looks like the trim seam is plainly visible.

I know nothing, just looked around. Personally if it turns out to be 6 inches longer I'd just let it hang out the 3-4 inches. when are you going to see another?

C10chevy1966 · 03-30-2013, 10:43 AM

in pic 2 its emblem says sierra grande
take a look

C10chevy1966 · 03-30-2013, 10:45 AM

Quote:

Originally Posted by Grizz1963

NO IDEA ABOUT LOGISTICS

It is in Ventura

And I am interested at this point.

My questions are these.....

Hope some of you have the answers.

It seems to be on a newer GMC Long Fleet truck.

What are the size differences between a loadbody like this and a 60-66 Fleetside dimensions ?

I was wondering if there is a universal size, or if these were custom sized and fitted to trucks.

WHAT WOULD ONE OFFER FOR ONE OF THESE ??

Seller asked me to make an offer.

Any help will be appreciated.

It could look like this.

see

**MusicMan70** · 03-30-2013, 01:13 PM

It looks to be a "Longhorn" 8 1/2ft bed. I have a Custom Camper Sierra Grande but it is the 127" WB standard long bed. I believe the bed option was separate from Sierra Grande.

**MusicMan70** · 03-30-2013, 01:15 PM

Forgot to ask Grizz; any photos of the Pullman inside?

Grizz1963 · 03-30-2013, 05:32 PM

Quote:

Originally Posted by MusicMan70

Forgot to ask Grizz; any photos of the Pullman inside?

Hi Herk

No pics of the inside.

I just hope this can all work together.

'63GENIII · 03-31-2013, 01:42 AM

Hey Grizz. I think Freak's idea of buying the truck and then parting it is a pretty good idea. Does that style have any sort of following over there? Parting it out may just pay for your Pullman?
Posted via Mobile Device

Grizz1963 · 03-31-2013, 08:00 AM

Quote:

Originally Posted by '63GENIII

Hey Grizz. I think Freak's idea of buying the truck and then parting it is a pretty good idea. Does that style have any sort of following over there? Parting it out may just pay for your Pullman?
Posted via Mobile Device

Hi Mate,

It is a good idea to part it out, but the cost of landing an extra truck here, and a very limited market

Take a look at this thread.

http://retrorides.proboards.com/inde...&thread=147998

Although I came late, there was only one 60-66 C10 truck and very few post 66 trucks and a few more pre 60 trucks.

The 60-66 trucks have not yet hit this market as "Retro/Rodding" material.

Anyway, back to a comment I made elsewhere.....

I would have been happy to pay $75-150 max, due to it being worth scrap, but there will not be another one in the UK.

Then it would have taken some time and effort to restore it, possibly polish some of the sections and paint part of it, or paint it all like the example above.

Due to the risk associated, I would top bid at $150 for a good one, and probably $100 or less on the one in that ad.

I definitely want an aluminium canopy/camper shell for my truck.

It makes life a lot easier when you bring a load of "stuff" with in the container as you could be able to lock it up and secure it.
Either way, I would love a part polished, part painted canopy t go to shows with.

One of these old Pullmans would just be 200% cooler and greatly functional along with the Grizz-Pod.

Unfortunately that one has sold.

'63GENIII · 03-31-2013, 10:09 AM

I hear ya Grizz. I'm probably going to have to modify a fleetside camper shell to fit my stepside. Too bad the Pullman was sold. The cool factor on that was through the roof!

Grizz1963 · 03-31-2013, 10:33 AM

Quote:

Originally Posted by '63GENIII

I hear ya Grizz. I'm probably going to have to modify a fleetside camper shell to fit my stepside. Too bad the Pullman was sold. The cool factor on that was through the roof!

Through the roof is my style, and the work and effort to get a rough one like that sorted out is worth doing, especially here in the UK where there are few C10 trucks.

**jocko** · 03-31-2013, 11:15 AM

Sierra Grande is just the top of the line GMC trim level (equiv to a Cheyenne Super). This truck is a longhorn, which only means it's a 133" (vice the standard lwb 127") wheelbase with a 6" extended bed to make up the difference (thus the front seam). You could order the Longhorn with any trim level - so this was a top of the line truck at some point.

That 65 is gorgeous!

03-30-2013, 04:42 AM	#1
Grizz1963 Registered User Join Date: Dec 2012 Location: Rochester, KENT Posts: 10,511	What price would you offer ? NO IDEA ABOUT LOGISTICS It is in Ventura And I am interested at this point. My questions are these..... Hope some of you have the answers. It seems to be on a newer GMC Long Fleet truck. What are the size differences between a loadbody like this and a 60-66 Fleetside dimensions ? I was wondering if there is a universal size, or if these were custom sized and fitted to trucks. WHAT WOULD ONE OFFER FOR ONE OF THESE ?? Seller asked me to make an offer. Any help will be appreciated. It could look like this. __________________ MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE.

03-30-2013, 05:40 AM	#2
thebeast61 Registered User Join Date: Nov 2010 Location: texas city, texas Posts: 66	Re: What price would you offer ? I cant help you with the price, but that camper is cool. I have never seen one like that.

03-30-2013, 06:46 AM	#3
72freak Rottenwood Garage Member Join Date: May 2005 Location: Marietta, Georgia Posts: 4,321	Re: What price would you offer ? Size should be about the same. If you are going to have it transported ,look into buying the entire rig if possible. It will make it easier for the transport person to haul. $300 to $400 max for the camper. You can part out or sell the truck once it gets to you. __________________ 2004 Chevrolet Suburban C1500 2001 Chevrolet 2500HD Crew 6.0 1999 Harley Davidson Electra Glide 1972 Chevrolet C-20 Custom Camper "Dump Truck" 1972 Chevrolet C-20 Suburban "Big Green" 1969 Chevrolet C-50 Wedge Hauler "Leonidis" 1966 C-10 2x4 short fleet 327 4 speed "Race Truck" 1952 Plymouth Cranbrook "Rican" (my grandfathers) 1931 Ford Model A Coupe "Black Beauty" 1930 Ford Model A truck "Club Cab" 4x4 Rottenwood Garage and Speed Shop.....where everything must be racy! *It's not just a hobby..It's a LIFESTYLE!!!* Thanks for nothing Barrett-Jackson You cant fix stupid or teach accountability! Time wasters, looky Lous and tire kickers are everywhere!

03-30-2013, 06:51 AM	#4
72freak Rottenwood Garage Member Join Date: May 2005 Location: Marietta, Georgia Posts: 4,321	Re: What price would you offer ? UPDATE......guys, Is that a LONGHORN? I cant tell from the angle/// If it is, it wont fit. Too long. Get the owner to put a tape on it. And yes, I know a GMC isnt called a Longhorn. __________________ 2004 Chevrolet Suburban C1500 2001 Chevrolet 2500HD Crew 6.0 1999 Harley Davidson Electra Glide 1972 Chevrolet C-20 Custom Camper "Dump Truck" 1972 Chevrolet C-20 Suburban "Big Green" 1969 Chevrolet C-50 Wedge Hauler "Leonidis" 1966 C-10 2x4 short fleet 327 4 speed "Race Truck" 1952 Plymouth Cranbrook "Rican" (my grandfathers) 1931 Ford Model A Coupe "Black Beauty" 1930 Ford Model A truck "Club Cab" 4x4 Rottenwood Garage and Speed Shop.....where everything must be racy! *It's not just a hobby..It's a LIFESTYLE!!!* Thanks for nothing Barrett-Jackson You cant fix stupid or teach accountability! Time wasters, looky Lous and tire kickers are everywhere!

03-30-2013, 09:54 AM	#7
joedoh Senior Member Join Date: May 2007 Location: Doodah Kansas Posts: 7,762	Re: What price would you offer ? definitely fits the longhorn theory if you read this website http://www.oldchevytrucks.com/blog/i...1972-longhorn/ looks like the trim seam is plainly visible. I know nothing, just looked around. Personally if it turns out to be 6 inches longer I'd just let it hang out the 3-4 inches. when are you going to see another? __________________ the mass of men live lives of quiet desperation if there is a problem, I can have it. new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393

03-30-2013, 10:43 AM	#8
C10chevy1966 Registered User Join Date: Feb 2013 Location: West Blocton,AL Posts: 41	Re: What price would you offer ? in pic 2 its emblem says sierra grande take a look

03-30-2013, 01:13 PM	#10
MusicMan70 Senior Member Join Date: Feb 2011 Location: Corona, CA Posts: 1,831	Re: What price would you offer ? It looks to be a "Longhorn" 8 1/2ft bed. I have a Custom Camper Sierra Grande but it is the 127" WB standard long bed. I believe the bed option was separate from Sierra Grande. __________________ MusicMan70 1961 GMC Suburban

03-30-2013, 01:15 PM	#11
MusicMan70 Senior Member Join Date: Feb 2011 Location: Corona, CA Posts: 1,831	Re: What price would you offer ? Forgot to ask Grizz; any photos of the Pullman inside? __________________ MusicMan70 1961 GMC Suburban

03-31-2013, 01:42 AM	#13
'63GENIII Registered User Join Date: Sep 2008 Location: San Carlos, Ca. Posts: 3,048	Re: What price would you offer ? Hey Grizz. I think Freak's idea of buying the truck and then parting it is a pretty good idea. Does that style have any sort of following over there? Parting it out may just pay for your Pullman? Posted via Mobile Device __________________ Chris '63 k15 long step Vortec 7.4 - L29 Blackbear tune, Five 0 Motorsports injectors, Chris Straub Cam, NV4500, divorced 205 52" front and 63" rear spring swap D44 / 14bff - disc axles Milemarker 9K and 10.5K hydraulic winches 63" & B52 Spring Install http://67-72chevytrucks.com/vboard/s...ng+swap+thread NV4500 Reverse Build Thread http://67-72chevytrucks.com/vboard/s...=reverse+build L29 - 7.4 Vortec Build http://67-72chevytrucks.com/vboard/s...&highlight=L29

03-31-2013, 10:09 AM	#15
'63GENIII Registered User Join Date: Sep 2008 Location: San Carlos, Ca. Posts: 3,048	Re: What price would you offer ? I hear ya Grizz. I'm probably going to have to modify a fleetside camper shell to fit my stepside. Too bad the Pullman was sold. The cool factor on that was through the roof! __________________ Chris '63 k15 long step Vortec 7.4 - L29 Blackbear tune, Five 0 Motorsports injectors, Chris Straub Cam, NV4500, divorced 205 52" front and 63" rear spring swap D44 / 14bff - disc axles Milemarker 9K and 10.5K hydraulic winches 63" & B52 Spring Install http://67-72chevytrucks.com/vboard/s...ng+swap+thread NV4500 Reverse Build Thread http://67-72chevytrucks.com/vboard/s...=reverse+build L29 - 7.4 Vortec Build http://67-72chevytrucks.com/vboard/s...&highlight=L29

03-31-2013, 11:15 AM	#17
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,945	Re: What price would you offer ? Sierra Grande is just the top of the line GMC trim level (equiv to a Cheyenne Super). This truck is a longhorn, which only means it's a 133" (vice the standard lwb 127") wheelbase with a 6" extended bed to make up the difference (thus the front seam). You could order the Longhorn with any trim level - so this was a top of the line truck at some point. That 65 is gorgeous!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.