|
04-05-2013, 10:21 PM
|
#1 |
|
frankenstien Fabrications
Join Date: Apr 2009
Location: Billings Montana
Posts: 222
|
my 69
I don't know if I posted my 69 getting t boned but about a year ago it did an older gentleman said he didn't even see me so it sat on the back burner until about a week ago when the guy using my shop said I had to get out so I have 30 days to finish my 3 project heres before i'll post after tomorrow well during lol
__________________
frankenstein Fabrications |
|
|
|
04-05-2013, 10:24 PM
|
#2 |
|
frankenstien Fabrications
Join Date: Apr 2009
Location: Billings Montana
Posts: 222
|
Re: my 69
that was an un rusted un molested door
__________________
frankenstein Fabrications |
|
|
|
|
04-08-2013, 10:59 AM
|
#3 |
|
frankenstien Fabrications
Join Date: Apr 2009
Location: Billings Montana
Posts: 222
|
Re: my 69
here are during we found out that with a 700r4 the trans cross member has to be moved back and re drilled along with the transfer case mount
__________________
frankenstein Fabrications |
|
|
|
|
04-15-2013, 03:38 PM
|
#4 |
|
frankenstien Fabrications
Join Date: Apr 2009
Location: Billings Montana
Posts: 222
|
Re: my 69
here are some updates of my truck I am hoping I get the front clip on tomorrow and hear it run I don't know if I will get it painted but i't coming right along
__________________
frankenstein Fabrications |
|
|
|
|
05-18-2013, 01:18 PM
|
#5 |
|
frankenstien Fabrications
Join Date: Apr 2009
Location: Billings Montana
Posts: 222
|
Re: my 69
heres where im at so far I got new panels from lmc truck ill get those in today
__________________
frankenstein Fabrications |
|
|
|
|
05-18-2013, 01:24 PM
|
#6 |
|
Registered User
Join Date: Apr 2013
Location: enumclaw, wa
Posts: 143
|
Re: my 69
keep the photos coming. i plan on tearing out my floors like you're doing and it would be really interesting to see your progress.
__________________
'67 2wd LWB 350/4speed. |
|
|
|
|
05-18-2013, 05:46 PM
|
#7 |
|
Grandpa in the rustmobile...
Join Date: Nov 2008
Location: Spokane WA/Viola TN
Posts: 11,422
|
Re: my 69
Sorry to hear about the T bone. I had the same thing happen to me few years ago, I came out OK insurance $ wise though.
__________________
John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4 |
|
|
|
|
09-08-2013, 11:45 AM
|
#8 |
|
frankenstien Fabrications
Join Date: Apr 2009
Location: Billings Montana
Posts: 222
|
Re: my 69
its been a while since I've been on so here's an update I've gotten enrolled in college to get my gpa up then its off to McPherson college in McPherson Kansas to take Automotive restoration, so here's the truck thus far
__________________
frankenstein Fabrications |
|
|
|
|
09-08-2013, 11:47 AM
|
#9 |
|
frankenstien Fabrications
Join Date: Apr 2009
Location: Billings Montana
Posts: 222
|
Re: my 69
I still need to shave the fuel hole still
__________________
frankenstein Fabrications |
|
|
|
|
09-13-2013, 08:17 PM
|
#10 |
|
frankenstien Fabrications
Join Date: Apr 2009
Location: Billings Montana
Posts: 222
|
Re: my 69
ok guys its me again so ive been sanding this bed for about an hour and I just got all the plastic ground out so my question is should I keep going or just scrap the idea and get another bed ? if I keep going how much more plastic am I going to run into thus how much more metal finishing am I going to do but at the same time what if the bed I get has tons of plastic in it let me know what you guys think
__________________
frankenstein Fabrications |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
