MO parting 67 C20 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Cheeseman · 04-11-2013, 09:19 PM

I am parting a 67 C/20 that I bought to pull the front clip off of. It is a 6 cyl w/ a manual tranny. 2wd and no options. Rusted out pretty bad. It may have a part you need so just ask and I will see what is left. It was running when I bought it but not well, I think the points were bad or the carb needed gone through. It will go to scrap in the next few weeks. Has a clear title. You can PM me your number and I can text pics of about anything. Will ship the smaller items, nothing large or oversized though. I have paypal.

Thanks.

Cheese "thinning the herd" Man

Mayo · 04-11-2013, 09:37 PM

What kind of shape is the gauge cluster bezel in? Is it a 7 hole cluster or the standard 3? Also, are you using the fender emblems and if not are they decent? Thanks.

DesertCat · 04-11-2013, 09:39 PM

Mayo responding to Cheeseman... I sense sandwich in the force

gmclonghorn · 04-11-2013, 09:40 PM

Interested if any auxiliary fuel tank switch
Posted via Mobile Device

Hercpilot · 04-11-2013, 09:55 PM

Any rear springs?

Justin

ScottG · 04-11-2013, 10:05 PM

interested in the heater controls if they're good.

Cheeseman · 04-11-2013, 10:14 PM

Quote:

Originally Posted by Mayo

What kind of shape is the gauge cluster bezel in? Is it a 7 hole cluster or the standard 3? Also, are you using the fender emblems and if not are they decent? Thanks.

I will have to check condition, but it is just the 3 hole, nothing fancy

Quote:

Originally Posted by gmclonghorn

Interested if any auxiliary fuel tank switch
Posted via Mobile Device

no switch, sorry

Quote:

Originally Posted by Hercpilot

Any rear springs?

Justin

yes, coils

Quote:

Originally Posted by ScottG

interested in the heater controls if they're good.

prior owner wired in a toggle switch to the fan, so I am assuming they are no good.

**ScottH** · 04-11-2013, 10:32 PM

Interested in arm rests & seat belts pending condition & price.

Thanks
Scott

Hercpilot · 04-11-2013, 10:35 PM

What are you asking for the springs, shipped to 73071?

**DaHos** · 04-11-2013, 10:39 PM

Interested in the following items pending pics, condition and price:

Arm rests, window cranks, complete ignition switch, visors, rear view mirror, exterior door handles, and steering wheel.

Maddoxdb · 04-11-2013, 11:01 PM

Next in line on ignition switch and possibly outside mirrors. Thanks, Dustin.
Posted via Mobile Device

Maddoxdb · 04-11-2013, 11:07 PM

Also lighter or radio delete. Pm sent for pics. Thanks, Dustin
Posted via Mobile Device

Chvy2NV · 04-12-2013, 02:58 AM

Steering wheel?
Posted via Mobile Device

dirish · 04-12-2013, 06:04 AM

Antenna to 37148.
Posted via Mobile Device

midniteblues · 04-12-2013, 08:35 AM

intrested in the wing windows....any pics?

Cheeseman · 04-12-2013, 08:55 AM

Quote:

Originally Posted by ScottH

Interested in arm rests & seat belts pending condition & price.

Thanks
Scott

Sorry Scott, no arm rests in this rig, it has the stripped down interior w/ just the metal panels. I will check on the color and condition of the seat belts, I am guessing they are toast though.

Quote:

Originally Posted by Hercpilot

What are you asking for the springs, shipped to 73071?

$50 shipped to your door per pair.

Quote:

Originally Posted by DaHos

Interested in the following items pending pics, condition and price:

Arm rests, window cranks, complete ignition switch, visors, rear view mirror, exterior door handles, and steering wheel.

It has no arm rests, I will check the window cranks this evening, exterior door handles are junk, Steering wheel is fair if I recall, I will check tis evening.

Quote:

Originally Posted by Maddoxdb

Next in line on ignition switch and possibly outside mirrors. Thanks, Dustin.
Posted via Mobile Device

Quote:

Originally Posted by Maddoxdb

Also lighter or radio delete. Pm sent for pics. Thanks, Dustin
Posted via Mobile Device

Sorry man, it has neither of those items left on it.

Quote:

Originally Posted by Chvy2NV

Steering wheel?
Posted via Mobile Device

It is a tan color and I will be checking condition this evening. I do know that it still has the factory center piece on it.

Quote:

Originally Posted by dirish

Antenna to 37148.
Posted via Mobile Device

No antenna, it had the smooth cowl.

Quote:

Originally Posted by midniteblues

intrested in the wing windows....any pics?

The drivers wing is already gone, but the pass is still there, can get pics this evening.

Cheeseman · 04-12-2013, 08:59 AM

This is a pic of the truck. I have stripped off the front clip and the drivers door. Everything else is still available.

Maddoxdb · 04-12-2013, 09:01 AM

What kind of seat? Almost looks like buckets.
Posted via Mobile Device

Cheeseman · 04-12-2013, 09:03 AM

I wish man! It has a late model bench in it that has seen better days.

Hercpilot · 04-12-2013, 09:07 AM

pm sent.

Justin

**phase_one** · 04-12-2013, 12:11 PM

if the rear wiring harness from the cab to rear lights is good im interested.

**Ol Blue K20** · 04-12-2013, 12:16 PM

Quote:

Originally Posted by DesertCat

Mayo responding to Cheeseman... I sense sandwich in the force

now that's funny

Chance72 · 04-12-2013, 12:30 PM

Metal door panels to 77532?

Chvy2NV · 04-13-2013, 11:08 AM

Quote:

Originally Posted by Ol Blue K20

now that's funny

Posted via Mobile Device

midniteblues · 04-15-2013, 07:40 AM

got any pics of the pass side wing?
thats the side i need the most mines broke at the bottom piviot

04-11-2013, 09:19 PM	#1
Cheeseman Registered User Join Date: Sep 2012 Location: Unionville, MO Posts: 185	parting 67 C20 I am parting a 67 C/20 that I bought to pull the front clip off of. It is a 6 cyl w/ a manual tranny. 2wd and no options. Rusted out pretty bad. It may have a part you need so just ask and I will see what is left. It was running when I bought it but not well, I think the points were bad or the carb needed gone through. It will go to scrap in the next few weeks. Has a clear title. You can PM me your number and I can text pics of about anything. Will ship the smaller items, nothing large or oversized though. I have paypal. Thanks. Cheese "thinning the herd" Man __________________ 1969 Chevy C10 "Project Home Wrecker" "If you think you can't, you are probably right"

04-11-2013, 09:37 PM	#2
Mayo Cool Truck Join Date: Dec 2008 Location: Bowie,MD Posts: 1,869	Re: parting 67 C20 What kind of shape is the gauge cluster bezel in? Is it a 7 hole cluster or the standard 3? Also, are you using the fender emblems and if not are they decent? Thanks. __________________ 1968 Chevrolet C20 Longhorn "Cool Truck" 1937 Chevrolet Pickup - Project Looking for a patina'd 68 50th Anniversary longbed

04-11-2013, 09:39 PM	#3
DesertCat Registered User Join Date: Mar 2011 Location: Valley of the Sunstroke, Arizona Posts: 1,210	Re: parting 67 C20 Mayo responding to Cheeseman... I sense sandwich in the force __________________ My build thread - Devastation and Reform http://67-72chevytrucks.com/vboard/s...d.php?t=567131

04-11-2013, 09:40 PM	#4
gmclonghorn Registered User Join Date: Mar 2011 Location: Westminster, Ca Posts: 1,104	Re: parting 67 C20 Interested if any auxiliary fuel tank switch Posted via Mobile Device

04-11-2013, 09:55 PM	#5
Hercpilot Registered User Join Date: Aug 2012 Location: Oklahoma City, OK Posts: 19	Re: parting 67 C20 Any rear springs? Justin

04-11-2013, 10:05 PM	#6
ScottG Registered User Join Date: Feb 2012 Location: Ventura,Ca Posts: 745	Re: parting 67 C20 interested in the heater controls if they're good. __________________ '67 C20 LBW

04-11-2013, 10:32 PM	#8
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: parting 67 C20 Interested in arm rests & seat belts pending condition & price. Thanks Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

04-11-2013, 10:35 PM	#9
Hercpilot Registered User Join Date: Aug 2012 Location: Oklahoma City, OK Posts: 19	Re: parting 67 C20 What are you asking for the springs, shipped to 73071?

04-11-2013, 10:39 PM	#10
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,859	Re: parting 67 C20 Interested in the following items pending pics, condition and price: Arm rests, window cranks, complete ignition switch, visors, rear view mirror, exterior door handles, and steering wheel. __________________ 1967 C10 SWB Owner - Rustbelt Restorations

04-11-2013, 11:01 PM	#11
Maddoxdb Registered User Join Date: Jun 2011 Location: Elk city ok Posts: 891	Re: parting 67 C20 Next in line on ignition switch and possibly outside mirrors. Thanks, Dustin. Posted via Mobile Device

04-11-2013, 11:07 PM	#12
Maddoxdb Registered User Join Date: Jun 2011 Location: Elk city ok Posts: 891	Re: parting 67 C20 Also lighter or radio delete. Pm sent for pics. Thanks, Dustin Posted via Mobile Device

04-12-2013, 02:58 AM	#13
Chvy2NV Registered User Join Date: Apr 2012 Location: So. Florida Posts: 873	Re: parting 67 C20 Steering wheel? Posted via Mobile Device

04-12-2013, 06:04 AM	#14
dirish Registered User Join Date: Dec 2012 Location: Heart of Tennessee Posts: 1,120	Re: parting 67 C20 Antenna to 37148. Posted via Mobile Device

04-12-2013, 08:35 AM	#15
midniteblues Registered User Join Date: Jul 2011 Location: strausstown pa Posts: 3,394	Re: parting 67 C20 intrested in the wing windows....any pics? __________________ 81 camaro 355 4/spd 342 posi my first love. 67 swb step 454/4spd ott 373 posi 4/7 drop. 2000 s10 zr2 little blue truck that never gets stuck. '74 heald super bronc vt8. tecumseh powered moon rover.

04-12-2013, 08:59 AM	#17
Cheeseman Registered User Join Date: Sep 2012 Location: Unionville, MO Posts: 185	Re: parting 67 C20 This is a pic of the truck. I have stripped off the front clip and the drivers door. Everything else is still available. __________________ 1969 Chevy C10 "Project Home Wrecker" "If you think you can't, you are probably right"



Register or Log In To remove these advertisements.

04-12-2013, 09:01 AM	#18
Maddoxdb Registered User Join Date: Jun 2011 Location: Elk city ok Posts: 891	Re: parting 67 C20 What kind of seat? Almost looks like buckets. Posted via Mobile Device

04-12-2013, 09:03 AM	#19
Cheeseman Registered User Join Date: Sep 2012 Location: Unionville, MO Posts: 185	Re: parting 67 C20 I wish man! It has a late model bench in it that has seen better days. __________________ 1969 Chevy C10 "Project Home Wrecker" "If you think you can't, you are probably right"

04-12-2013, 09:07 AM	#20
Hercpilot Registered User Join Date: Aug 2012 Location: Oklahoma City, OK Posts: 19	Re: parting 67 C20 pm sent. Justin

04-12-2013, 12:11 PM	#21
phase_one Registered User Join Date: Jul 2001 Location: Praireville. LA 70769 Posts: 390	Re: parting 67 C20 if the rear wiring harness from the cab to rear lights is good im interested. __________________ 11 Surbaban 70 C 10 still in progress

04-12-2013, 12:30 PM	#23
Chance72 Registered User Join Date: Jan 2013 Location: Crosby, Texas Posts: 336	Re: parting 67 C20 Metal door panels to 77532?

04-15-2013, 07:40 AM	#25
midniteblues Registered User Join Date: Jul 2011 Location: strausstown pa Posts: 3,394	Re: parting 67 C20 got any pics of the pass side wing? thats the side i need the most mines broke at the bottom piviot __________________ 81 camaro 355 4/spd 342 posi my first love. 67 swb step 454/4spd ott 373 posi 4/7 drop. 2000 s10 zr2 little blue truck that never gets stuck. '74 heald super bronc vt8. tecumseh powered moon rover.

Register or Log In To remove these advertisements.