One And Done. The Porterbuilt sponsored 1959 fleetside. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

broey · 04-12-2013, 11:10 PM

One and done........Whats this all about? Thats going to have to wait until later. But for now, let me just give you a little bit of back story. A friend of mine who knew I was looking for a truck found my truck, in state. I drove at night for 4 hours by my self to get it from the old man who was letting it go. So I show up, it's dark. I'm using a flashlight on my phone to check everything out. And after a few minutes, I decide it's up to my standards for my plans. I load it up on the trailer and off I go. The whole ride home I'm just looking at the front of the truck, staring me down through the read view mirror of the truck Yezzi let me borrow to go get it, And I fell in love.

How you see the truck right now is pretty much how I got it. it was missing the rear bumper and the sun visor on the driver side, which I got right away and installed. After that I didn't touch it. I couldn't decide what to do. slam it? bag it? paint it? what interior color do I choose? factory wheels and caps or something different? I had no Idea where to take it. My last truck was a square. you may have seen it before on here. CLICK ME FOR A LINK TO IT That truck sat on the ground, and I loved it, so finally I make the decision. lay it out....

Since I was able to see Poncho in person, A truck built by Delmo using the front and rear Porterbuilt Dropmembers. I knew this was the best way. Nate and Dave from Porterbuilt agreed... and thats where we are today

The "One And Done" thing is already in the works, and I will let you all know as soon as I can. It does after all involve all of you and any of you that choose to be a part of something amazing. But for now....here is the truck as it sits.

If you made it this far, first of all thanks!! second,the secret to "One And Done" will be announced soon. within the next 2 weeks!

Flames97 · 04-12-2013, 11:47 PM

I know this thing is gonna turn out awesome! I'll be watching for sure.
Posted via Mobile Device

chevyboy73 · 04-13-2013, 12:16 AM

i would drop it and leave it as is! great truck!

Red Foreman · 04-13-2013, 01:41 AM

On Board buddy from way down in Australia, speaking of which we may have a connection??

broey · 04-13-2013, 01:47 AM

possibly....

19fiftybomb · 04-13-2013, 01:59 AM

Put hydros on it. Two pump dumb
Posted via Mobile Device

broey · 04-13-2013, 02:07 AM

You should sell your car and buy a truck
Posted via Mobile Device

19fiftybomb · 04-13-2013, 02:10 AM

Tryin mate
Posted via Mobile Device

rhd_c10 · 04-13-2013, 03:18 AM

Quote:

Originally Posted by 19fiftybomb

Tryin mate
Posted via Mobile Device

let it burn..

jmedero · 04-13-2013, 08:31 AM

Sweet truck I'm in!!!
Posted via Mobile Device

chevyrestoguy · 04-13-2013, 10:15 AM

Man, that's a really solid truck to start with!

I have built dozens of '73-'87s, and I was a huge fan of your '84. That '84 was done nicely, and if this '59 is anywhere close to that level, it will be killer. With the team you've got to build this one, I think it'll be waaaaay better!

broey · 04-13-2013, 10:24 AM

Quote:

Originally Posted by Flames97

I know this thing is gonna turn out awesome! I'll be watching for sure.
Posted via Mobile Device

Thanks. I have huge plans for this truck. And with the help of a few big names around here it should be an awesome and fun build

Quote:

Originally Posted by chevyboy73

i would drop it and leave it as is! great truck!

you don't know me at all....

Quote:

Originally Posted by jmedero

Sweet truck I'm in!!!
Posted via Mobile Device

Thanks dude!

Quote:

Originally Posted by chevyrestoguy

Man, that's a really solid truck to start with!

I have built dozens of '73-'87s, and I was a huge fan of your '84. That '84 was done nicely, and if this '59 is anywhere close to that level, it will be killer. With the team you've got to build this one, I think it'll be waaaaay better!

Thanks! Yeah I really hope this truck ends up as nice as my last one!
Posted via Mobile Device

Kim57 · 04-13-2013, 10:36 AM

Looks like a real nice start. Will watch this to see where you go with it.
Kim

shawno72 · 04-13-2013, 10:39 AM

Sub'd for sure!!

meter swinger · 04-13-2013, 10:48 AM

Always in for another four eyed fatbox. Let the pics fly

Posted via Mobile Device

broey · 04-13-2013, 01:12 PM

Quote:

Originally Posted by Kim57

Looks like a real nice start. Will watch this to see where you go with it.
Kim

cool thanks!

Quote:

Originally Posted by shawno72

Sub'd for sure!!

awww yeeaahh.

Quote:

Originally Posted by meter swinger

Always in for another four eyed fatbox. Let the pics fly

Posted via Mobile Device

fat box, lol... that fits actually, the trucks name is gordo

cAlvis165 · 04-13-2013, 05:20 PM

Love the '59. I'm in...

**lolife99** · 04-13-2013, 05:44 PM

Signing up for this one.
The Dropmember is making these trucks really appealing to me.

broey · 04-13-2013, 06:29 PM

Quote:

Originally Posted by lolife99

Signing up for this one.
The Dropmember is making these trucks really appealing to me.

nice!! you might have to change the signature under your picture!!

broey · 04-13-2013, 06:30 PM

Quote:

Originally Posted by cAlvis165

Love the '59. I'm in...

awesome!!

Yezzi · 04-13-2013, 08:31 PM

Can't wait to see it

trout · 04-13-2013, 09:36 PM

Nice im on board keeping the inline?
Posted via Mobile Device

broey · 04-13-2013, 10:02 PM

Quote:

Originally Posted by Yezzi

Can't wait to see it

I'll never show you
Posted via Mobile Device

broey · 04-13-2013, 10:03 PM

Quote:

Originally Posted by trout

Nice im on board keeping the inline?
Posted via Mobile Device

Nah I'll be switching to a v8
Posted via Mobile Device

72BlckButy · 04-13-2013, 11:11 PM

I'm in...
Posted via Mobile Device

04-12-2013, 11:10 PM	#1
broey Square Join Date: Feb 2011 Location: Phoenix Arizona Posts: 1,568	One And Done. The Porterbuilt sponsored 1959 fleetside. One and done........Whats this all about? Thats going to have to wait until later. But for now, let me just give you a little bit of back story. A friend of mine who knew I was looking for a truck found my truck, in state. I drove at night for 4 hours by my self to get it from the old man who was letting it go. So I show up, it's dark. I'm using a flashlight on my phone to check everything out. And after a few minutes, I decide it's up to my standards for my plans. I load it up on the trailer and off I go. The whole ride home I'm just looking at the front of the truck, staring me down through the read view mirror of the truck Yezzi let me borrow to go get it, And I fell in love. How you see the truck right now is pretty much how I got it. it was missing the rear bumper and the sun visor on the driver side, which I got right away and installed. After that I didn't touch it. I couldn't decide what to do. slam it? bag it? paint it? what interior color do I choose? factory wheels and caps or something different? I had no Idea where to take it. My last truck was a square. you may have seen it before on here. CLICK ME FOR A LINK TO IT That truck sat on the ground, and I loved it, so finally I make the decision. lay it out.... Since I was able to see Poncho in person, A truck built by Delmo using the front and rear Porterbuilt Dropmembers. I knew this was the best way. Nate and Dave from Porterbuilt agreed... and thats where we are today The "One And Done" thing is already in the works, and I will let you all know as soon as I can. It does after all involve all of you and any of you that choose to be a part of something amazing. But for now....here is the truck as it sits. If you made it this far, first of all thanks!! second,the secret to "One And Done" will be announced soon. within the next 2 weeks! __________________ Squarebody Syndicate Last edited by broey; 05-15-2013 at 08:24 PM.

04-12-2013, 11:47 PM	#2
Flames97 Registered User Join Date: Jan 2010 Location: Tonasket, Washington Posts: 316	Re: One And Done. The Porterbuilt sponsored 1959 fleetside. I know this thing is gonna turn out awesome! I'll be watching for sure. Posted via Mobile Device __________________ -Aaron '15.5 Chevy Duramax LTZ/Z71, LML, CC/SB '77 Chevy K10, 4" lift, 33-12.50, 350/350 '55 Chevy Short Box (In Pieces)MII,4-link,Bagged,383 Stroker,700r4,3.73posi (SOLD) My 55.2 Chevy 3100 Build

04-13-2013, 12:16 AM	#3
chevyboy73 Registered User Join Date: Sep 2012 Location: Sun Prairie, WI Posts: 131	Re: One And Done. The Porterbuilt sponsored 1959 fleetside. i would drop it and leave it as is! great truck! __________________ 2011 Silverado ECSB LT 2000 Silverado RCSB 2WD super bad habit of not owning a vehicle for a long time

04-13-2013, 01:41 AM	#4
Red Foreman Registered User Join Date: Dec 2009 Location: Melbourne Australia Posts: 549	Re: One And Done. The Porterbuilt sponsored 1959 fleetside. On Board buddy from way down in Australia, speaking of which we may have a connection?? __________________ RIP John (Lambis), my beloved Father & best Friend. My Build 56 GMC http://67-72chevytrucks.com/vboard/s...d.php?t=486721

04-13-2013, 01:47 AM	#5
broey Square Join Date: Feb 2011 Location: Phoenix Arizona Posts: 1,568	Re: One And Done. The Porterbuilt sponsored 1959 fleetside. possibly.... __________________ Squarebody Syndicate

04-13-2013, 01:59 AM	#6
19fiftybomb Registered User Join Date: Feb 2011 Location: cave creek, az Posts: 21	Re: One And Done. The Porterbuilt sponsored 1959 fleetside. Put hydros on it. Two pump dumb Posted via Mobile Device __________________ My build. 1950 chevy style line deluxe. http://www.jalopyjournal.com/forum/s...d.php?t=570965

04-13-2013, 02:07 AM	#7
broey Square Join Date: Feb 2011 Location: Phoenix Arizona Posts: 1,568	Re: One And Done. The Porterbuilt sponsored 1959 fleetside. You should sell your car and buy a truck Posted via Mobile Device __________________ Squarebody Syndicate

04-13-2013, 02:10 AM	#8
19fiftybomb Registered User Join Date: Feb 2011 Location: cave creek, az Posts: 21	Re: One And Done. The Porterbuilt sponsored 1959 fleetside. Tryin mate Posted via Mobile Device __________________ My build. 1950 chevy style line deluxe. http://www.jalopyjournal.com/forum/s...d.php?t=570965

04-13-2013, 08:31 AM	#10
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: One And Done. The Porterbuilt sponsored 1959 fleetside. Sweet truck I'm in!!! Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

04-13-2013, 10:15 AM	#11
chevyrestoguy Registered User Join Date: Mar 2005 Location: apple valley, ca Posts: 2,670	Re: One And Done. The Porterbuilt sponsored 1959 fleetside. Man, that's a really solid truck to start with! I have built dozens of '73-'87s, and I was a huge fan of your '84. That '84 was done nicely, and if this '59 is anywhere close to that level, it will be killer. With the team you've got to build this one, I think it'll be waaaaay better! __________________ Check out my latest endeavor: https://roundsixpod.com My build threads: '55 Chevy: http://67-72chevytrucks.com/vboard/s...d.php?t=247512 '64 C-20: http://67-72chevytrucks.com/vboard/s...d.php?t=446527

04-13-2013, 10:36 AM	#13
Kim57 Registered User Join Date: Aug 2007 Location: Corona, California Posts: 7,998	Re: One And Done. The Porterbuilt sponsored 1959 fleetside. Looks like a real nice start. Will watch this to see where you go with it. Kim __________________ My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=283107

04-13-2013, 10:39 AM	#14
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: One And Done. The Porterbuilt sponsored 1959 fleetside. Sub'd for sure!! __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

04-13-2013, 10:48 AM	#15
meter swinger Registered User Join Date: Apr 2009 Location: Kennewick WA. Posts: 1,437	Re: One And Done. The Porterbuilt sponsored 1959 fleetside. Always in for another four eyed fatbox. Let the pics fly Posted via Mobile Device

04-13-2013, 05:20 PM	#17
cAlvis165 Registered User Join Date: Aug 2011 Location: N.E. OH Posts: 214	Re: One And Done. The Porterbuilt sponsored 1959 fleetside. Love the '59. I'm in... __________________ Success is not final, failure is not fatal: it is the courage to continue that counts. Winston Churchill DD 2000 Chevy Suburban 4x4/5.3 Vortec/4L60E/4:10s, 18" Escalade rims, Electric fans Project Dooley One-Ton 4x4 on 38.5s Corn-binder build

04-13-2013, 05:44 PM	#18
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,701	Re: One And Done. The Porterbuilt sponsored 1959 fleetside. Signing up for this one. The Dropmember is making these trucks really appealing to me. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823



Register or Log In To remove these advertisements.

04-13-2013, 08:31 PM	#21
Yezzi Registered User Join Date: Dec 2010 Location: Phoenix Posts: 1,176	Re: One And Done. The Porterbuilt sponsored 1959 fleetside. Can't wait to see it __________________ www.squarebodysyndicate.com Instagram #squarebodysyndicate http://squarebodysyndicate.com/builds.html http://67-72chevytrucks.com/vboard/s...d.php?t=496609 http://67-72chevytrucks.com/vboard/s...d.php?t=451831 http://67-72chevytrucks.com/vboard/s...d.php?t=554914 http://67-72chevytrucks.com/vboard/s...d.php?t=506772

04-13-2013, 09:36 PM	#22
trout Registered User Join Date: Jun 2010 Location: lexington, SC Posts: 1,276	Re: One And Done. The Porterbuilt sponsored 1959 fleetside. Nice im on board keeping the inline? Posted via Mobile Device __________________ Edited by staff

04-13-2013, 11:11 PM	#25
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: One And Done. The Porterbuilt sponsored 1959 fleetside. I'm in... Posted via Mobile Device __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

Register or Log In To remove these advertisements.