350/400 cylinder heads FS - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lukecp · 06-22-2003, 11:04 AM

I have a matching pair of casting number 462624 cylinder heads for sale.
Mortec.com says 75-85 350 or 400, 76cc chambers, and they have 1.72/1.50 valves in them.
They were rebuilt 21xxx miles ago and i ran them in my truck with no problems. They had a full valve job, as well as hardned exhaust valve seats installed. I have looked them over pretty good and i have found no cracks, and they did not leak coolant when i ran them on the truck.
They are complete with valves, valvesprings, and rocker arm studs.

I will take $100 obo for the pair, plus shipping.

lukecp · 06-23-2003, 10:08 AM

ttt

lukecp · 06-23-2003, 07:55 PM

Ok, price reduced to $75 obo, plus shipping. I took these heads off my truck 2 weeks ago to bolt on a pair of higer-performance heads. They worked great in my truck, but i wanted a bit more power. I would not hesitate to bolt them on and drive off. Save some money over getting your old heads rebuilt, or buying a new pair.

JimKshortstep4x4 · 06-24-2003, 07:39 AM

Are the heads drilled for steam holes?

Jim

lukecp · 06-24-2003, 05:01 PM

I'm not sure. I can go look though. Where are the steam holes located on the head?

Blue_71 · 06-24-2003, 05:14 PM

right between each cylinder, there will be 2 holes

lukecp · 06-25-2003, 06:03 PM

Sorry, the heads don't have steam holes.

lukecp · 06-26-2003, 03:05 PM

ttt

Price reduced to $50 plus shipping. These are a pair of low-mileage, rebuilt heads, for $25 each.

muleskinner · 07-02-2003, 07:56 PM

never heard of steam holes in heads. is that one of those nifty tricks?

06-22-2003, 11:04 AM	#1
lukecp Formerly yellow72custom Join Date: May 2001 Location: Austin, TX Posts: 7,531	350/400 cylinder heads FS I have a matching pair of casting number 462624 cylinder heads for sale. Mortec.com says 75-85 350 or 400, 76cc chambers, and they have 1.72/1.50 valves in them. They were rebuilt 21xxx miles ago and i ran them in my truck with no problems. They had a full valve job, as well as hardned exhaust valve seats installed. I have looked them over pretty good and i have found no cracks, and they did not leak coolant when i ran them on the truck. They are complete with valves, valvesprings, and rocker arm studs. I will take $100 obo for the pair, plus shipping. __________________ '72 Chevy C10 Mild 350/TH350/3.07. Ochre/White. Old high school ride. '70 GMC C2500 '62 327 4bbl/SM465/4.56-geared Dana 60. White/White. Project or parts truck. '97 Saturn SL DD. 1.9/5-speed. 40+ highway mpg

06-23-2003, 10:08 AM	#2
lukecp Formerly yellow72custom Join Date: May 2001 Location: Austin, TX Posts: 7,531	ttt __________________ '72 Chevy C10 Mild 350/TH350/3.07. Ochre/White. Old high school ride. '70 GMC C2500 '62 327 4bbl/SM465/4.56-geared Dana 60. White/White. Project or parts truck. '97 Saturn SL DD. 1.9/5-speed. 40+ highway mpg

06-23-2003, 07:55 PM	#3
lukecp Formerly yellow72custom Join Date: May 2001 Location: Austin, TX Posts: 7,531	Ok, price reduced to $75 obo, plus shipping. I took these heads off my truck 2 weeks ago to bolt on a pair of higer-performance heads. They worked great in my truck, but i wanted a bit more power. I would not hesitate to bolt them on and drive off. Save some money over getting your old heads rebuilt, or buying a new pair. __________________ '72 Chevy C10 Mild 350/TH350/3.07. Ochre/White. Old high school ride. '70 GMC C2500 '62 327 4bbl/SM465/4.56-geared Dana 60. White/White. Project or parts truck. '97 Saturn SL DD. 1.9/5-speed. 40+ highway mpg

06-24-2003, 05:01 PM	#5
lukecp Formerly yellow72custom Join Date: May 2001 Location: Austin, TX Posts: 7,531	I'm not sure. I can go look though. Where are the steam holes located on the head? __________________ '72 Chevy C10 Mild 350/TH350/3.07. Ochre/White. Old high school ride. '70 GMC C2500 '62 327 4bbl/SM465/4.56-geared Dana 60. White/White. Project or parts truck. '97 Saturn SL DD. 1.9/5-speed. 40+ highway mpg

06-25-2003, 06:03 PM	#7
lukecp Formerly yellow72custom Join Date: May 2001 Location: Austin, TX Posts: 7,531	Sorry, the heads don't have steam holes. __________________ '72 Chevy C10 Mild 350/TH350/3.07. Ochre/White. Old high school ride. '70 GMC C2500 '62 327 4bbl/SM465/4.56-geared Dana 60. White/White. Project or parts truck. '97 Saturn SL DD. 1.9/5-speed. 40+ highway mpg

06-24-2003, 07:39 AM	#4
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Are the heads drilled for steam holes? Jim

06-26-2003, 03:05 PM	#8
lukecp Formerly yellow72custom Join Date: May 2001 Location: Austin, TX Posts: 7,531	ttt Price reduced to $50 plus shipping. These are a pair of low-mileage, rebuilt heads, for $25 each. __________________ '72 Chevy C10 Mild 350/TH350/3.07. Ochre/White. Old high school ride. '70 GMC C2500 '62 327 4bbl/SM465/4.56-geared Dana 60. White/White. Project or parts truck. '97 Saturn SL DD. 1.9/5-speed. 40+ highway mpg

07-02-2003, 07:56 PM	#9
muleskinner Registered User Join Date: Jan 2003 Location: Valrico, FL Posts: 65	never heard of steam holes in heads. is that one of those nifty tricks? __________________ I'm not a Muleskinner...... Dad gave me that CB handle when I was 8 so......... it pops in my head every now and then.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.