BIG Static drop with a notch pic request - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ab_70chevy · 04-23-2013, 05:09 PM

Looking to see how far I can take my '70 long bed with either a c notch, or step notch. Dont really have the money to fund and air ride right now, so we're going with the next best thing. Im fine cutting the frame, bed, what ever to get her low. Iv heard of guys using 6 inch spings with 2 inch blocks, but I haven't seen the pictures. Any help would be great, Id appreciate it.
Thanks fellas
-Andrew

Roger71SWB · 04-23-2013, 05:38 PM

Static Drop/ C-Notch 8X6

RaceAGMC · 04-23-2013, 05:46 PM

Roger, more pics of that beauty please.
Posted via Mobile Device

Roger71SWB · 04-24-2013, 10:21 AM

At your request. More Pictures

zammer · 04-26-2013, 02:03 PM

SIk! what a killer stance

stomper · 04-26-2013, 02:14 PM

I have a C notch, 6" drop springs, and 1-1/2" blocks in back.

vegadesign · 04-26-2013, 02:17 PM

if you really wanna go crazy
hotchkins 6" drop coils and make some 3" drop blocks like i did
granted you may have problems with the scrub line with smaller rims but i havent had any problems
and choppp the hell out of the front coils

and believe it or not it wont be that pricy to do air ride
you can put the bags in the rear of the stock location of the coils for now
so bairly any mod back there

the front just buy the upper plate and lower cup for under $100
and theres plenty of great deals out there for bags
by the time you buy all your components for the static drop you will already be alomst $100 away from having air ride

CC69Rat · 04-26-2013, 02:19 PM

Mine is not finished, but here is 6" springs and 1" block with a notch. I may actually do 2" blocks once I see the front. Definitely a little room back there for more block (that's why the Ubolts havent been cut off yet.. ) I also used the Hotchkis 'Anti Squat' kit to raise the mounting point of the front of the trailing arms.

**screaminchevypickup** · 04-26-2013, 02:23 PM

5.5/8
Posted via Mobile Device
Posted via Mobile Device

big d's red67 · 04-26-2013, 02:47 PM

5/7 4" drop springs 3" Porterbuilt drop trailing arms,with Porterbuilt two pice c-notch. 2.5" drop spindles and 2" lowering springs with half a coil cut.

JWSmith · 06-17-2013, 02:31 PM

I ordered the 4.5/6" drop from ECE...I'm thinking I am going to go ahead and notch it while the bed is off and I am taking care of the frame.

Did you guys that step notched have to do any bed modifications?

big d's red67 · 06-17-2013, 03:34 PM

I used the Porterbuilt c-notch, I made no bed mods.
Posted via Mobile Device

CC69Rat · 06-17-2013, 03:48 PM

IF your truck is a wood floor, you will likely need to do a couple recessed places in the wood on the back side where the wood can sit down over the bolts in the top of the notch plate. Not a big deal but .. I think the wood sits about 3/4" lower as compared to the thickness of the metal floor. I could be wrong (?) .. but I had to back drill mine to get it to sit flush.

JWSmith · 06-17-2013, 04:15 PM

metal floor on mine right now...

big mike71 · 06-17-2013, 05:34 PM

Quote:

Originally Posted by Roger71SWB

At your request. More Pictures

Very nice truck, But those breathers are a major fire hazard.

LONGHAIR · 06-17-2013, 06:46 PM

Quote:

Originally Posted by big mike71

Very nice truck, But those breathers are a major fire hazard.

Yes they are, one backfire can make a bad day.

I can't believe that they still make/sell them?

jondancer · 06-17-2013, 07:33 PM

Quote:

Originally Posted by CC69Rat

Mine is not finished, but here is 6" springs and 1" block with a notch. I may actually do 2" blocks once I see the front. Definitely a little room back there for more block (that's why the Ubolts havent been cut off yet.. ) I also used the Hotchkis 'Anti Squat' kit to raise the mounting point of the front of the trailing arms.

You should cut the extra length off the bottom of those u-bolt, they look below the scrub line. I used a grinder with a cut off wheel for mine.
Posted via Mobile Device

CC69Rat · 06-17-2013, 07:38 PM

Maybe re-read the post?

. Thanks for the info but it was just for mockup. It now has 2" blocks in it and the bolts were changed over to shorter ones.

Not trying to be an a55..
Posted via Mobile Device

69moneypit · 06-17-2013, 07:43 PM

Quote:

Originally Posted by CC69Rat

Mine is not finished, but here is 6" springs and 1" block with a notch. I may actually do 2" blocks once I see the front. Definitely a little room back there for more block (that's why the Ubolts havent been cut off yet.. ) I also used the Hotchkis 'Anti Squat' kit to raise the mounting point of the front of the trailing arms.

Very clean . Looks great .
Posted via Mobile Device

04-23-2013, 05:09 PM	#1
ab_70chevy Registered User Join Date: May 2012 Location: Wichita, KS Posts: 63	BIG Static drop with a notch pic request Looking to see how far I can take my '70 long bed with either a c notch, or step notch. Dont really have the money to fund and air ride right now, so we're going with the next best thing. Im fine cutting the frame, bed, what ever to get her low. Iv heard of guys using 6 inch spings with 2 inch blocks, but I haven't seen the pictures. Any help would be great, Id appreciate it. Thanks fellas -Andrew Attached Images

04-23-2013, 05:38 PM	#2
Roger71SWB Registered User Join Date: Oct 2012 Location: vancouver washington Posts: 89	Re: BIG Static drop with a notch pic request Static Drop/ C-Notch 8X6 Attached Images

04-23-2013, 05:46 PM	#3
RaceAGMC Registered User Join Date: Jul 2007 Location: Charlotte, NC Posts: 350	Re: BIG Static drop with a notch pic request Roger, more pics of that beauty please. Posted via Mobile Device __________________ 70 CST, 6.0/ 4L80E in the works. Custom harness by 68 Short Step

04-24-2013, 10:21 AM	#4
Roger71SWB Registered User Join Date: Oct 2012 Location: vancouver washington Posts: 89	Re: BIG Static drop with a notch pic request At your request. More Pictures Attached Images

04-26-2013, 02:03 PM	#5
zammer Addicted user Join Date: Sep 2009 Location: Edmonton, Alberta Posts: 369	Re: BIG Static drop with a notch pic request SIk! what a killer stance __________________ 1972 2wd Blazer - 95% completed 2015 Silverado 1500 4wd -z 2008 AERO 9-7X (TBSS cousin) LS2 1970 Jimmy 4wd - future project

04-26-2013, 02:14 PM	#6
stomper Junior Member Join Date: Jul 2002 Location: Scottsdale, AZ Posts: 1,700	Re: BIG Static drop with a notch pic request I have a C notch, 6" drop springs, and 1-1/2" blocks in back. Attached Images __________________ "I was patina when patina wasn't cool." 1973 Cheyenne SWB Sunset Gold / Frost White / Saddle

04-26-2013, 02:17 PM	#7
vegadesign Registered User Join Date: May 2012 Location: murfreesboro, TN Posts: 743	Re: BIG Static drop with a notch pic request if you really wanna go crazy hotchkins 6" drop coils and make some 3" drop blocks like i did granted you may have problems with the scrub line with smaller rims but i havent had any problems and choppp the hell out of the front coils and believe it or not it wont be that pricy to do air ride you can put the bags in the rear of the stock location of the coils for now so bairly any mod back there the front just buy the upper plate and lower cup for under $100 and theres plenty of great deals out there for bags by the time you buy all your components for the static drop you will already be alomst $100 away from having air ride __________________ "its not a hobby, It's a Lifestyle" . bagged and soon to be bodied 70 longbed http://67-72chevytrucks.com/vboard/s...d.php?t=564028

04-26-2013, 02:19 PM	#8
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,208	Re: BIG Static drop with a notch pic request Mine is not finished, but here is 6" springs and 1" block with a notch. I may actually do 2" blocks once I see the front. Definitely a little room back there for more block (that's why the Ubolts havent been cut off yet.. ) I also used the Hotchkis 'Anti Squat' kit to raise the mounting point of the front of the trailing arms. Attached Images __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

04-26-2013, 02:23 PM	#9
screaminchevypickup Laid Back Join Date: Apr 2010 Location: mcloud ok Posts: 2,658	Re: BIG Static drop with a notch pic request 5.5/8 Posted via Mobile Device Posted via Mobile Device Attached Images __________________ 72 chevy swb Direct dealers for.. Vintage Air, Porterbuilt, Billet Specialties,Budnik wheels ,eddie motorsports, raceline wheels, intro wheels, Dakota Digital, precision, unisteer, Trimparts, and many many more... Laid Back Recreations.. Full restoration shop and full paint and body.. Kyle http://67-72chevytrucks.com/vboard/s...d.php?t=574629

04-26-2013, 02:47 PM	#10
big d's red67 Registered User Join Date: May 2010 Location: Broken Arrow Okla. Posts: 510	Re: BIG Static drop with a notch pic request 5/7 4" drop springs 3" Porterbuilt drop trailing arms,with Porterbuilt two pice c-notch. 2.5" drop spindles and 2" lowering springs with half a coil cut. Attached Images __________________ 1967 swb 454 cid 700R4 trans SOLD 2006 Chevy Trailblazer SS 2013 Camaro RS convertible the wife's Build thread http://67-72chevytrucks.com/vboard/s...d.php?t=573248

06-17-2013, 02:31 PM	#11
JWSmith Registered User Join Date: May 2013 Location: Godfrey, IL Posts: 220	Re: BIG Static drop with a notch pic request I ordered the 4.5/6" drop from ECE...I'm thinking I am going to go ahead and notch it while the bed is off and I am taking care of the frame. Did you guys that step notched have to do any bed modifications?

06-17-2013, 03:34 PM	#12
big d's red67 Registered User Join Date: May 2010 Location: Broken Arrow Okla. Posts: 510	Re: BIG Static drop with a notch pic request I used the Porterbuilt c-notch, I made no bed mods. Posted via Mobile Device __________________ 1967 swb 454 cid 700R4 trans SOLD 2006 Chevy Trailblazer SS 2013 Camaro RS convertible the wife's Build thread http://67-72chevytrucks.com/vboard/s...d.php?t=573248

06-17-2013, 03:48 PM	#13
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,208	Re: BIG Static drop with a notch pic request IF your truck is a wood floor, you will likely need to do a couple recessed places in the wood on the back side where the wood can sit down over the bolts in the top of the notch plate. Not a big deal but .. I think the wood sits about 3/4" lower as compared to the thickness of the metal floor. I could be wrong (?) .. but I had to back drill mine to get it to sit flush. __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

06-17-2013, 04:15 PM	#14
JWSmith Registered User Join Date: May 2013 Location: Godfrey, IL Posts: 220	Re: BIG Static drop with a notch pic request metal floor on mine right now...

06-17-2013, 07:38 PM	#18
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,208	Re: BIG Static drop with a notch pic request Maybe re-read the post? . Thanks for the info but it was just for mockup. It now has 2" blocks in it and the bolts were changed over to shorter ones. Not trying to be an a55.. Posted via Mobile Device __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.