NH Parting out - 1967 C30 chassis cab - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**JJorgensen52** · 05-09-2013, 10:04 PM

Figured I'd give you guys a chance for anything on this truck before I scrap what's left of it.

As far as the body goes, the dash is in good shape, the cowl is fine and the grille shell I think is OK, pretty much every other panel is dented or rusted or both.

Parts I've ID'd so far:

1 interior door handle in okay shape
Both exterior door handles are driver quality
Wing windows are complete but rusty
Ignition switch works fine but the key is snapped off in it
Radio is all there but not working as far as I can tell
Steering wheel is actually decent, column has correct red hazard stalk
Silver painted '67 glove box door

The fuse panel appears to be okay, but most of the wiring in the truck is hacked so tough to say for sure

Mechanically, SM420 with PTO, mid-70's SBC of unknown displacement. HO72 rear end, drum brake C30 front end, brake drums in OK shape. Chassis is iffy, could maybe be used if you wanted to shorten it

Mr.Chevy4x4 · 05-09-2013, 10:23 PM

How about the clutch/brake pedal assembly shipped to 27880?

**too much stuff** · 05-09-2013, 10:31 PM

Seat belts?

midniteblues · 05-09-2013, 10:34 PM

inline on seat belts only if they are retractable

Carbajal · 05-09-2013, 11:00 PM

Price on the radio shipped to 92530
Posted via Mobile Device

**JJorgensen52** · 05-09-2013, 11:17 PM

I will check the seatbelts tomorrow, pretty sure they are retractable but I don't think the passenger's side is there anymore, the floor pan is long gone.

PMs sent to Mr.Chevy4x4 and Carbajal.

sir_talk_alot · 05-10-2013, 12:03 AM

I might be interested in the Steering wheel. Whats price and shipping to 72120? Ive been wanting a 67 steering wheel.
Posted via Mobile Device

gmclonghorn · 05-10-2013, 12:18 AM

Interested in the mirrors . How much plus shipping to cali
Posted via Mobile Device

**JJorgensen52** · 05-10-2013, 12:41 AM

sir_talk_alot, gmclonghorn, PMs sent.

Undone · 05-10-2013, 05:11 AM

Front sway bar?

nobolt · 05-10-2013, 05:14 AM

i would be interested in the mirrors and brackets if original and not banged up. maybe som patch panels too (front of fenders and hood edge). shipping to 48001. also have a business address if that helps with shipping cost.
thanks.

**CUSTOM/10** · 05-10-2013, 07:05 AM

Might be interested in the cowl panel if it's rust free and straight ?

What part of NH are you in ?

Gary

Rochlow · 05-10-2013, 07:12 AM

How is the hood?
Posted via Mobile Device

no moa · 05-10-2013, 07:54 AM

The rear tires and rims (the tires look like a good mean tread) and rearend is ok? I'm looking for another set of rims for my 69 c30. And a spare rearend.
Thanks
Glen

botmfedr1 · 05-10-2013, 09:00 AM

Put me first in line for the ignition switch support. (My buddy Wes, needs one)

Price shipped to 98388?

thanks,
mondo

Sammy · 05-10-2013, 09:55 AM

Interested in the radio cups, two securing nuts. Rear view mirror, plus the drivers side exterior door handle if the plating isn't too bad possibly the pair if the passenger is decent.

*Maximuz* · 05-10-2013, 11:13 AM

Interested in headlight bezels, can you get me some shots and a price shipped to 93906, thx
Posted via Mobile Device

Number98 · 05-10-2013, 11:58 AM

I am interested in the steering wheel and horn button, if it's still available.

Can you pm me a price with shipping to 30281?

**JJorgensen52** · 05-10-2013, 01:19 PM

Quote:

Originally Posted by Undone

Front sway bar?

Nope, there isn't one on it, just checked.

I will have the requested pictures up later this afternoon

**JJorgensen52** · 05-10-2013, 02:53 PM

PMs sent to CUSTOM/10, no moa, Botmfedr1

Maximuz - one of the bezels is steel and the other aluminum, if you still want them I'll PM a price.

Rochlow, nobolt - the hood is pretty beat up, the front edge I think is okay but the rest of it is junk

Sammy, Number98 - second dibs on respective items

Seatbelts are NON retractable, only the driver's side tab is there, and they need to be rewebbed. Really only for someone who needs the buckles.

Also just discovered it has power brakes, I believe that is an early 3/4ton booster but not 100% sure on that, it's not on the SPID

Pictures:

**jabborabbo** · 05-10-2013, 03:29 PM

Interested in the lighter assembly and wiring - is it in decent shape and how much shipped to Zip Code 37334?

PM sent!

Thanks!

Jerry

Rochlow · 05-10-2013, 03:45 PM

How much for the hood and what part of NH do you live in?

Sammy · 05-10-2013, 04:28 PM

Sway bar brackets by chance? If they are the same for 1/2 T..1 in bar......... Door handles I will pass I have the twins here on hand.

Sammy · 05-10-2013, 04:34 PM

I see now sorry no sway bar.

gmclonghorn · 05-10-2013, 06:30 PM

I will pass on the mirrors. Looking for a set. Thanks
Posted via Mobile Device

05-09-2013, 10:04 PM	#1
JJorgensen52 Simple? What's simple? Join Date: Apr 2007 Location: Southeast CT Posts: 1,472	Parting out - 1967 C30 chassis cab Figured I'd give you guys a chance for anything on this truck before I scrap what's left of it. As far as the body goes, the dash is in good shape, the cowl is fine and the grille shell I think is OK, pretty much every other panel is dented or rusted or both. Parts I've ID'd so far: 1 interior door handle in okay shape Both exterior door handles are driver quality Wing windows are complete but rusty Ignition switch works fine but the key is snapped off in it Radio is all there but not working as far as I can tell Steering wheel is actually decent, column has correct red hazard stalk Silver painted '67 glove box door The fuse panel appears to be okay, but most of the wiring in the truck is hacked so tough to say for sure Mechanically, SM420 with PTO, mid-70's SBC of unknown displacement. HO72 rear end, drum brake C30 front end, brake drums in OK shape. Chassis is iffy, could maybe be used if you wanted to shorten it __________________ CURRENT '50 GMC 100 shortbed Gen IV 4.8 LS - 4L65E (Secret truck, Shhh!!!) Build '63 Buick Wildcat Coupe 401ci Nailhead (Very much in pieces) Photos '66 Impala SS convertible 327-QJet-glide (4 speed swap one of these days...) Photos '69 CST/10 4x4 SWB Stepper 350 2bbl - NV4500/NP241C (Broken Truck!) '72 Sierra Grande 2WD LWB fleetside 350-TH350 Refresh '99 K2500 Silverado RCLB 5.7 Vortec - NV4500/NP241C (Daily) '99 K2500 Suburban 7.4 Vortec - NV4500/NP246 (still working out the bugs) SOLD '71 Custom/10 2WD LWB fleetside - '72 GMC K/3500 Dually (Sold to redryder) Last edited by JJorgensen52; 05-09-2013 at 10:20 PM.

05-09-2013, 10:23 PM	#2
Mr.Chevy4x4 Registered User Join Date: Jul 2007 Location: Sims, NC Posts: 531	Re: Parting out - 1967 C30 chassis cab How about the clutch/brake pedal assembly shipped to 27880? __________________ All things Chevy truck: 1986 SWB "Jolene" boosted 5.3/4l80e project

05-09-2013, 10:31 PM	#3
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,804	Re: Parting out - 1967 C30 chassis cab Seat belts? __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

05-09-2013, 10:34 PM	#4
midniteblues Registered User Join Date: Jul 2011 Location: strausstown pa Posts: 3,394	Re: Parting out - 1967 C30 chassis cab inline on seat belts only if they are retractable __________________ 81 camaro 355 4/spd 342 posi my first love. 67 swb step 454/4spd ott 373 posi 4/7 drop. 2000 s10 zr2 little blue truck that never gets stuck. '74 heald super bronc vt8. tecumseh powered moon rover.

05-09-2013, 11:00 PM	#5
Carbajal Registered User Join Date: Mar 2009 Location: Lake Elsinore, California Posts: 90	Re: Parting out - 1967 C30 chassis cab Price on the radio shipped to 92530 Posted via Mobile Device

05-09-2013, 11:17 PM	#6
JJorgensen52 Simple? What's simple? Join Date: Apr 2007 Location: Southeast CT Posts: 1,472	Re: Parting out - 1967 C30 chassis cab I will check the seatbelts tomorrow, pretty sure they are retractable but I don't think the passenger's side is there anymore, the floor pan is long gone. PMs sent to Mr.Chevy4x4 and Carbajal. __________________ CURRENT '50 GMC 100 shortbed Gen IV 4.8 LS - 4L65E (Secret truck, Shhh!!!) Build '63 Buick Wildcat Coupe 401ci Nailhead (Very much in pieces) Photos '66 Impala SS convertible 327-QJet-glide (4 speed swap one of these days...) Photos '69 CST/10 4x4 SWB Stepper 350 2bbl - NV4500/NP241C (Broken Truck!) '72 Sierra Grande 2WD LWB fleetside 350-TH350 Refresh '99 K2500 Silverado RCLB 5.7 Vortec - NV4500/NP241C (Daily) '99 K2500 Suburban 7.4 Vortec - NV4500/NP246 (still working out the bugs) SOLD '71 Custom/10 2WD LWB fleetside - '72 GMC K/3500 Dually (Sold to redryder)

05-10-2013, 12:03 AM	#7
sir_talk_alot Registered User Join Date: May 2011 Location: Mayflower,AR Posts: 802	Re: Parting out - 1967 C30 chassis cab I might be interested in the Steering wheel. Whats price and shipping to 72120? Ive been wanting a 67 steering wheel. Posted via Mobile Device __________________ -Mike- '94 GMT 400 ext z71 3" body, 3 in rough country, hd mirrors, 20" motometals on 35s

05-10-2013, 12:18 AM	#8
gmclonghorn Registered User Join Date: Mar 2011 Location: Westminster, Ca Posts: 1,104	Re: Parting out - 1967 C30 chassis cab Interested in the mirrors . How much plus shipping to cali Posted via Mobile Device

05-10-2013, 12:41 AM	#9
JJorgensen52 Simple? What's simple? Join Date: Apr 2007 Location: Southeast CT Posts: 1,472	Re: Parting out - 1967 C30 chassis cab sir_talk_alot, gmclonghorn, PMs sent. __________________ CURRENT '50 GMC 100 shortbed Gen IV 4.8 LS - 4L65E (Secret truck, Shhh!!!) Build '63 Buick Wildcat Coupe 401ci Nailhead (Very much in pieces) Photos '66 Impala SS convertible 327-QJet-glide (4 speed swap one of these days...) Photos '69 CST/10 4x4 SWB Stepper 350 2bbl - NV4500/NP241C (Broken Truck!) '72 Sierra Grande 2WD LWB fleetside 350-TH350 Refresh '99 K2500 Silverado RCLB 5.7 Vortec - NV4500/NP241C (Daily) '99 K2500 Suburban 7.4 Vortec - NV4500/NP246 (still working out the bugs) SOLD '71 Custom/10 2WD LWB fleetside - '72 GMC K/3500 Dually (Sold to redryder)

05-10-2013, 05:11 AM	#10
Undone Registered User Join Date: Aug 2010 Location: commerce ga Posts: 896	Re: Parting out - 1967 C30 chassis cab Front sway bar?

05-10-2013, 05:14 AM	#11
nobolt Registered User Join Date: Oct 2011 Location: Algonac, MI 48001 Posts: 1,848	Re: Parting out - 1967 C30 chassis cab i would be interested in the mirrors and brackets if original and not banged up. maybe som patch panels too (front of fenders and hood edge). shipping to 48001. also have a business address if that helps with shipping cost. thanks. __________________ Dave "... government even in its best state is but a necessary evil. Thomas Paine "It wasn't a lie, it was ineptitude with insufficient cover." Donald Draper (Mad Men)

05-10-2013, 07:05 AM	#12
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,857	Re: Parting out - 1967 C30 chassis cab Might be interested in the cowl panel if it's rust free and straight ? What part of NH are you in ? Gary __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859

05-10-2013, 07:12 AM	#13
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: Parting out - 1967 C30 chassis cab How is the hood? Posted via Mobile Device __________________ ///Relaxed Atmosphere

05-10-2013, 07:54 AM	#14
no moa Registered User Join Date: Nov 2009 Location: maine Posts: 2,315	Re: Parting out - 1967 C30 chassis cab The rear tires and rims (the tires look like a good mean tread) and rearend is ok? I'm looking for another set of rims for my 69 c30. And a spare rearend. Thanks Glen __________________ 1972 C10 Deluxe.Shortbed. 402/400. A/C, white interior, needs complete restore. Project Red, white and blue. Used to be a Longbed apperently. http://67-72chevytrucks.com/vboard/s...d.php?t=451950 1971 c10 step 250 3 OTT 1969 c30 TOW-MATER. 307 4 speed, holmes 440 body. http://67-72chevytrucks.com/vboard/s...d.php?t=451082 2006 CTS-V LS2 6spd.

05-10-2013, 09:00 AM	#15
botmfedr1 Registered User Join Date: Feb 2008 Location: Harlingen, TX Posts: 1,096	Re: Parting out - 1967 C30 chassis cab Put me first in line for the ignition switch support. (My buddy Wes, needs one) Price shipped to 98388? thanks, mondo



Register or Log In To remove these advertisements.

05-10-2013, 09:55 AM	#16
Sammy Registered User Join Date: Apr 2000 Location: Bonne Terre, Mo Posts: 3,005	Re: Parting out - 1967 C30 chassis cab Interested in the radio cups, two securing nuts. Rear view mirror, plus the drivers side exterior door handle if the plating isn't too bad possibly the pair if the passenger is decent. __________________ '69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629"

05-10-2013, 11:13 AM	#17
Maximuz Account Suspended Join Date: Jan 2013 Location: California Posts: 132	Re: Parting out - 1967 C30 chassis cab Interested in headlight bezels, can you get me some shots and a price shipped to 93906, thx Posted via Mobile Device

05-10-2013, 11:58 AM	#18
Number98 Prestige Worldwide Join Date: Feb 2001 Location: Worldwide Posts: 2,552	Re: Parting out - 1967 C30 chassis cab I am interested in the steering wheel and horn button, if it's still available. Can you pm me a price with shipping to 30281?

05-10-2013, 02:53 PM	#20
JJorgensen52 Simple? What's simple? Join Date: Apr 2007 Location: Southeast CT Posts: 1,472	Re: Parting out - 1967 C30 chassis cab PMs sent to CUSTOM/10, no moa, Botmfedr1 Maximuz - one of the bezels is steel and the other aluminum, if you still want them I'll PM a price. Rochlow, nobolt - the hood is pretty beat up, the front edge I think is okay but the rest of it is junk Sammy, Number98 - second dibs on respective items Seatbelts are NON retractable, only the driver's side tab is there, and they need to be rewebbed. Really only for someone who needs the buckles. Also just discovered it has power brakes, I believe that is an early 3/4ton booster but not 100% sure on that, it's not on the SPID Pictures: __________________ CURRENT '50 GMC 100 shortbed Gen IV 4.8 LS - 4L65E (Secret truck, Shhh!!!) Build '63 Buick Wildcat Coupe 401ci Nailhead (Very much in pieces) Photos '66 Impala SS convertible 327-QJet-glide (4 speed swap one of these days...) Photos '69 CST/10 4x4 SWB Stepper 350 2bbl - NV4500/NP241C (Broken Truck!) '72 Sierra Grande 2WD LWB fleetside 350-TH350 Refresh '99 K2500 Silverado RCLB 5.7 Vortec - NV4500/NP241C (Daily) '99 K2500 Suburban 7.4 Vortec - NV4500/NP246 (still working out the bugs) SOLD '71 Custom/10 2WD LWB fleetside - '72 GMC K/3500 Dually (Sold to redryder)

05-10-2013, 03:29 PM	#21
jabborabbo Senior Member Join Date: Apr 2013 Location: Podunk, Texas Posts: 773	Re: Parting out - 1967 C30 chassis cab Interested in the lighter assembly and wiring - is it in decent shape and how much shipped to Zip Code 37334? PM sent! Thanks! Jerry Last edited by jabborabbo; 05-10-2013 at 03:35 PM.

05-10-2013, 03:45 PM	#22
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: Parting out - 1967 C30 chassis cab How much for the hood and what part of NH do you live in? __________________ ///Relaxed Atmosphere

05-10-2013, 04:28 PM	#23
Sammy Registered User Join Date: Apr 2000 Location: Bonne Terre, Mo Posts: 3,005	Re: Parting out - 1967 C30 chassis cab Sway bar brackets by chance? If they are the same for 1/2 T..1 in bar......... Door handles I will pass I have the twins here on hand. __________________ '69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629"

05-10-2013, 04:34 PM	#24
Sammy Registered User Join Date: Apr 2000 Location: Bonne Terre, Mo Posts: 3,005	Re: Parting out - 1967 C30 chassis cab I see now sorry no sway bar. __________________ '69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629"

05-10-2013, 06:30 PM	#25
gmclonghorn Registered User Join Date: Mar 2011 Location: Westminster, Ca Posts: 1,104	Re: Parting out - 1967 C30 chassis cab I will pass on the mirrors. Looking for a set. Thanks Posted via Mobile Device

Register or Log In To remove these advertisements.