64 Porterbuilt Project "Lola" - The 1947 - Present Chevrolet & GMC Truck Message Board Network

82swb · 05-13-2013, 02:22 PM

Well, Sold my square a couple months ago because I was fiending for a 63-66. Spent a month or so looking for the right truck, rust free, SWB, fleetside, bbw. The truck I ended up purchasing was a rust free, swb, fleetside, sbw..Three out of four ain't bad! The truck had been completely torn apart 5 years ago for a full frame off restoration. The bed has been body worked and is straight as an arrow, no bondo either! The front sheet metal pieces including the hood have as been straightened and are in primer. The cab is the only part that hasn't had body work done to it. My plans are a Pancake crossmember, porterbuilt forward arms (already ordered) They will be ready next week! Mcgaughy's 2.5" drop spindles and 5x5 lug disc brake kit (also already ordered and will be here on tuesday). For the rear I am going to basically get a rear dropmember but im going to buy this piece by piece. I ordered a rear extreme notch along with my arms so those will be ready next week as well. As far as paint goes I will be doing a white and turquoise two tone. The truck was not a custom cab when i bought it but i love custom trim so i will be turning this into a custom cab truck. The truck came with a 327 out of a 64 corvette and it was recently rebuilt so it will be staying. I will be purchasing a 700r4 trans but that will be down the road. I am a poor college student who is about to get married in september so this will be a slower build for now until we get settled. Enough of my rambling here are some pictures.

82swb · 05-13-2013, 02:26 PM

Some more pictures.

19GMC66 · 05-13-2013, 02:27 PM

Sounds like a good plan and a good truck to start with.
Posted via Mobile Device

82swb · 05-13-2013, 02:29 PM

This is my set up in the backyard. Im going to be putting it together as is with the two PB parts i bought along with the mcgaughy's pieces. I am moving into a new house so i want this to be a roller by the end of the month so i can roll it onto the trailer. The trailer in the pictures came with the truck. Not a bad deal!

82swb · 05-13-2013, 02:30 PM

Quote:

Originally Posted by 19GMC66

Sounds like a good plan and a good truck to start with.
Posted via Mobile Device

Thanks, Love your GMC!

82swb · 05-13-2013, 02:39 PM

Member "Hotcar" drew me a rendering. This is basically what it will look like when it's finished. He did a great job. Thanks again! I forgot to mention in my first post what i will be doing for wheels. Im going to go with Mobsteel's Detroit steel 20" wheel, powder coated white. Cap is to be determined.

Jmorales3181 · 05-13-2013, 02:54 PM

Looks like a nice truck to start with.... Welcome to our sickness

Posted via Mobile Device

1963c-10 · 05-13-2013, 03:20 PM

Welcome and great looking project.

82swb · 05-13-2013, 04:09 PM

Quote:

Originally Posted by Jmorales3181

Looks like a nice truck to start with.... Welcome to our sickness

Posted via Mobile Device

Thanks!
Posted via Mobile Device

82swb · 05-13-2013, 04:10 PM

Quote:

Originally Posted by 1963c-10

Welcome and great looking project.

Thank you
Posted via Mobile Device
Posted via Mobile Device

Dinos63 · 05-13-2013, 05:38 PM

Nice!! Let the fun begin!

82swb · 05-13-2013, 05:43 PM

Quote:

Originally Posted by Dinos63

Nice!! Let the fun begin!

Thanks Dino! I'm stoked to get my PB parts!
Posted via Mobile Device

82swb · 05-16-2013, 01:48 AM

Posted via Mobile Device
Small update. Got my disc brake kit and drop spindles yesterday! I haven't had a chance to open them yet due to my work schedule these past two days but I have tomorrow and Friday off. Porterbuilt should be giving me a call tomorrow or Friday to let me know my parts are ready for pick up. Once that happens its on! Hoping to get the cab mounted and front suspension together by Friday.
Posted via Mobile Device
Posted via Mobile Device

McMurphy · 05-16-2013, 12:35 PM

and

to the site !

I also provided a sketch rendering of what I envisioned my truck to look like when done.
I plan on doibng a side by side photo of that drawing with the truck when complete, just to see how close the realization came to the original dream !!

Rock on, and good luck, looks like you have a pretty solid rig to start with !!!

82swb · 05-16-2013, 01:58 PM

Thanks! I've been on the site for some time, but now I finally get to contribute to the 60-66 portion of the site. I intend to do the same when my truck is complete.
Posted via Mobile Device

BuiltByBrooks · 05-29-2013, 11:59 PM

Sweet truck to start with

82swb · 05-30-2013, 08:08 PM

Quote:

Originally Posted by BuiltByBrooks

Sweet truck to start with

Thank you. Put it together so that I could get it all on the trailer. It's in storage and will be there for 3 months, unfortunately.
Posted via Mobile Device

82swb · 05-30-2013, 08:11 PM

Posted via Mobile Device
Here is the fiancé. She has been extremely helpful. After 5 hours of assembling she needed a much needed break.
Posted via Mobile Device
Posted via Mobile Device

Modges'66 · 05-30-2013, 08:50 PM

Hmmmmm, am I missing something?
Did you take it all apart, then put it back together?
Are you practicing? LOL!
I am sure that you have a story to tell...

82swb · 05-30-2013, 09:00 PM

Quote:

Originally Posted by Modges'66

Hmmmmm, am I missing something?
Did you take it all apart, then put it back together?
Are you practicing? LOL!
I am sure that you have a story to tell...

Hahaha, I bought it in pieces. PO took the whole thing apart to do a frame off and lost interest so he left it like that for years. In a way I am practicing. I just moved and had to get everything on the trailer so I could store it. Pain in the ass but I really didn't have another choice. It's loosely put together so disassembly should be a breeze, should be...
Posted via Mobile Device

Modges'66 · 05-30-2013, 09:14 PM

I figured that something was up!
I am sure that once you get situated in the new local, it will be game-on!

Modges'66 · 05-30-2013, 09:15 PM

BTW!
Good Luck!!!

bubba327 · 05-30-2013, 10:45 PM

Hey another Lola..

Daughter named her truck LOLA cuz we transgendered it from a 3 speed on the tree to an automatic.
Remember the Kinks classic hit L-O-L-A ,Lola..
she wanted classic license plates "Lowla" but changed her mind when she had to buy the tags and plates at DMV..
Gonna have to watch this build progress , looks good so far..
welcome to the fun!!

82swb · 05-31-2013, 12:06 AM

Quote:

Originally Posted by bubba327

Hey another Lola..

Daughter named her truck LOLA cuz we transgendered it from a 3 speed on the tree to an automatic.
Remember the Kinks classic hit L-O-L-A ,Lola..
she wanted classic license plates "Lowla" but changed her mind when she had to buy the tags and plates at DMV..
Gonna have to watch this build progress , looks good so far..
welcome to the fun!!

Yeah, fiance named it. I do know the song. Thats so funny I was showing her the song and she said it was fitting because, as she sits she is a homely "girl". Great minds think a like as far as the plate goes. Had that in mind since she named it. Even went to a site that will show you what your customized plate will look like. I thought I was being extremely clever....

82swb · 05-31-2013, 12:08 AM

Quote:

Originally Posted by Modges'66

BTW!
Good Luck!!!

Thanks!

05-13-2013, 02:22 PM	#1
82swb Registered User Join Date: May 2012 Location: Gilbert, Arizona Posts: 256	64 Porterbuilt Project "Lola" Well, Sold my square a couple months ago because I was fiending for a 63-66. Spent a month or so looking for the right truck, rust free, SWB, fleetside, bbw. The truck I ended up purchasing was a rust free, swb, fleetside, sbw..Three out of four ain't bad! The truck had been completely torn apart 5 years ago for a full frame off restoration. The bed has been body worked and is straight as an arrow, no bondo either! The front sheet metal pieces including the hood have as been straightened and are in primer. The cab is the only part that hasn't had body work done to it. My plans are a Pancake crossmember, porterbuilt forward arms (already ordered) They will be ready next week! Mcgaughy's 2.5" drop spindles and 5x5 lug disc brake kit (also already ordered and will be here on tuesday). For the rear I am going to basically get a rear dropmember but im going to buy this piece by piece. I ordered a rear extreme notch along with my arms so those will be ready next week as well. As far as paint goes I will be doing a white and turquoise two tone. The truck was not a custom cab when i bought it but i love custom trim so i will be turning this into a custom cab truck. The truck came with a 327 out of a 64 corvette and it was recently rebuilt so it will be staying. I will be purchasing a 700r4 trans but that will be down the road. I am a poor college student who is about to get married in september so this will be a slower build for now until we get settled. Enough of my rambling here are some pictures. Attached Images

05-13-2013, 02:26 PM	#2
82swb Registered User Join Date: May 2012 Location: Gilbert, Arizona Posts: 256	Re: 64 Porterbuilt Project "Lola" Some more pictures. Attached Images

05-13-2013, 02:27 PM	#3
19GMC66 Registered User Join Date: Nov 2012 Location: AZ Posts: 146	Re: 64 Porterbuilt Project "Lola" Sounds like a good plan and a good truck to start with. Posted via Mobile Device

05-13-2013, 02:29 PM	#4
82swb Registered User Join Date: May 2012 Location: Gilbert, Arizona Posts: 256	Re: 64 Porterbuilt Project "Lola" This is my set up in the backyard. Im going to be putting it together as is with the two PB parts i bought along with the mcgaughy's pieces. I am moving into a new house so i want this to be a roller by the end of the month so i can roll it onto the trailer. The trailer in the pictures came with the truck. Not a bad deal! Attached Images

05-13-2013, 02:39 PM	#6
82swb Registered User Join Date: May 2012 Location: Gilbert, Arizona Posts: 256	Re: 64 Porterbuilt Project "Lola" Member "Hotcar" drew me a rendering. This is basically what it will look like when it's finished. He did a great job. Thanks again! I forgot to mention in my first post what i will be doing for wheels. Im going to go with Mobsteel's Detroit steel 20" wheel, powder coated white. Cap is to be determined. Attached Images

05-13-2013, 02:54 PM	#7
Jmorales3181 Registered User Join Date: Aug 2012 Location: Smithfield rhode island Posts: 722	Re: 64 Porterbuilt Project "Lola" Looks like a nice truck to start with.... Welcome to our sickness Posted via Mobile Device __________________ My frame Layin 63 short bed project http://67-72chevytrucks.com/vboard/s...d.php?t=551353

05-13-2013, 03:20 PM	#8
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: 64 Porterbuilt Project "Lola" Welcome and great looking project. __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

05-13-2013, 05:38 PM	#11
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: 64 Porterbuilt Project "Lola" Nice!! Let the fun begin! __________________ CHEVY ONLY... Nothin Else !

05-16-2013, 01:48 AM	#13
82swb Registered User Join Date: May 2012 Location: Gilbert, Arizona Posts: 256	Re: 64 Porterbuilt Project "Lola" Posted via Mobile Device Small update. Got my disc brake kit and drop spindles yesterday! I haven't had a chance to open them yet due to my work schedule these past two days but I have tomorrow and Friday off. Porterbuilt should be giving me a call tomorrow or Friday to let me know my parts are ready for pick up. Once that happens its on! Hoping to get the cab mounted and front suspension together by Friday. Posted via Mobile Device Posted via Mobile Device Attached Images

05-16-2013, 12:35 PM	#14
McMurphy Registered User Join Date: Sep 2011 Location: Tacoma, WA Posts: 2,425	Re: 64 Porterbuilt Project "Lola" and to the site ! I also provided a sketch rendering of what I envisioned my truck to look like when done. I plan on doibng a side by side photo of that drawing with the truck when complete, just to see how close the realization came to the original dream !! Rock on, and good luck, looks like you have a pretty solid rig to start with !!! __________________ Michael McMurphy My 66 Stepside My 64 Tow Truck My 66 Tempest Table Of Contents Added to Page1

05-16-2013, 01:58 PM	#15
82swb Registered User Join Date: May 2012 Location: Gilbert, Arizona Posts: 256	Re: 64 Porterbuilt Project "Lola" Thanks! I've been on the site for some time, but now I finally get to contribute to the 60-66 portion of the site. I intend to do the same when my truck is complete. Posted via Mobile Device

05-29-2013, 11:59 PM	#16
BuiltByBrooks Argon User Join Date: Oct 2008 Location: Qc, AZ Posts: 353	Re: 64 Porterbuilt Project "Lola" Sweet truck to start with __________________ 1966 gmc big window build http://67-72chevytrucks.com/vboard/s...=320148&page=4 1966 big window fully tubed chassis build http://67-72chevytrucks.com/vboard/s...d.php?t=485198 www.facebook.com/builtbybrooks

05-30-2013, 08:11 PM	#18
82swb Registered User Join Date: May 2012 Location: Gilbert, Arizona Posts: 256	Re: 64 Porterbuilt Project "Lola" Posted via Mobile Device Here is the fiancé. She has been extremely helpful. After 5 hours of assembling she needed a much needed break. Posted via Mobile Device Posted via Mobile Device Attached Images

05-30-2013, 08:50 PM	#19
Modges'66 Registered User Join Date: Feb 2012 Location: Grand Rapids, Michigan, otherwise known as Beer City U.S.A. Posts: 1,081	Re: 64 Porterbuilt Project "Lola" Hmmmmm, am I missing something? Did you take it all apart, then put it back together? Are you practicing? LOL! I am sure that you have a story to tell... __________________ My Build: http://67-72chevytrucks.com/vboard/s...d.php?t=512904

05-30-2013, 09:14 PM	#21
Modges'66 Registered User Join Date: Feb 2012 Location: Grand Rapids, Michigan, otherwise known as Beer City U.S.A. Posts: 1,081	Re: 64 Porterbuilt Project "Lola" I figured that something was up! I am sure that once you get situated in the new local, it will be game-on! __________________ My Build: http://67-72chevytrucks.com/vboard/s...d.php?t=512904



Register or Log In To remove these advertisements.

05-30-2013, 09:15 PM	#22
Modges'66 Registered User Join Date: Feb 2012 Location: Grand Rapids, Michigan, otherwise known as Beer City U.S.A. Posts: 1,081	Re: 64 Porterbuilt Project "Lola" BTW! Good Luck!!! __________________ My Build: http://67-72chevytrucks.com/vboard/s...d.php?t=512904

05-30-2013, 10:45 PM	#23
bubba327 HOW long until spring?? Join Date: Mar 2009 Location: Star Idaho Posts: 1,413	Re: 64 Porterbuilt Project "Lola" Hey another Lola.. Daughter named her truck LOLA cuz we transgendered it from a 3 speed on the tree to an automatic. Remember the Kinks classic hit L-O-L-A ,Lola.. she wanted classic license plates "Lowla" but changed her mind when she had to buy the tags and plates at DMV.. Gonna have to watch this build progress , looks good so far.. welcome to the fun!! __________________ 69 chevelle convertible 71-C-10 short-wide and low 64 C-10 custom shortbox "Bubba"s Recycling project" Last edited by bubba327; 05-30-2013 at 10:46 PM. Reason: misspell

Register or Log In To remove these advertisements.