Roller into a trailer? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jesseo · 05-20-2013, 03:23 PM

I bought a 64 LB FS "roller" with no front clip or motor/trans for $200 with title

The bed is in great shape minus the wood being gone. I bought it for the great cab (mine is a hacked up mess) PO

I was going to swap cabs, find a clip and motor/trans and resell. Now I am thinking of just making into a utility trailer. Any thoughts? This would leave me with a good title for a barn or field find too.

61_FL_Apache · 05-20-2013, 06:57 PM

I think its a great opportunity to have a trailer to match your truck!!

**Clyde65** · 05-21-2013, 08:37 AM

Im doing the trailer also, I have a short fleet on my truck and found a short fleet for the trailer about 2 years ago. Now I just need time to do it.

jesseo · 05-21-2013, 04:02 PM

Quote:

Originally Posted by 61_FL_Apache

I think its a great opportunity to have a trailer to match your truck!!

Thanks for the support I was feeling a little bad about cutting it up but only because I know there are guys out there looking for stuff.

Quote:

Originally Posted by Clyde65

Im doing the trailer also, I have a short fleet on my truck and found a short fleet for the trailer about 2 years ago. Now I just need time to do it.

Me too on the time. Told my wife I was thinking about spending Memorial Day weekend getting it done. Did not go over with the wife very well. She is great and always says yes but I can tell by the way she says it. I will be working on it another weekend.

**Clyde65** · 05-22-2013, 10:10 AM

I get that, Im planning on media blasting my frame (trailer) and the bed parts, then Ill start putting it together. I may have to purchase a couple cross braces because of the awful rust on these that came with the long bed.

My trailer was a long bed, the bed was so far gone, I scrapped it. the only parts that were usable were two of the fender braces, everything else had bad holes and missing parts.

jesseo · 05-22-2013, 11:52 AM

That is why I feel a little bad. This truck is in the beginning stages of being redone. The bodywork on the bed is great. The bed is straight and primed and ready for paint. I will pull it to prep and paint the frame. Pull my cab that is AWESOME and keep the title and vin plate for ???

05-20-2013, 03:23 PM	#1
jesseo Registered User Join Date: Dec 2012 Location: Central Point Posts: 236	Roller into a trailer? I bought a 64 LB FS "roller" with no front clip or motor/trans for $200 with title The bed is in great shape minus the wood being gone. I bought it for the great cab (mine is a hacked up mess) PO I was going to swap cabs, find a clip and motor/trans and resell. Now I am thinking of just making into a utility trailer. Any thoughts? This would leave me with a good title for a barn or field find too. Last edited by jesseo; 05-20-2013 at 03:33 PM.

05-20-2013, 06:57 PM	#2
61_FL_Apache Who Me? Join Date: Sep 2010 Location: Royal Palm Beach, FL Posts: 4,067	Re: Roller into a trailer? I think its a great opportunity to have a trailer to match your truck!! __________________ Steve 1997 Tahoe LT 4D 2WD (DD) 2001 Blazer 4D 2WD 1961 Apache 10 (sold) 1965 C10 Stepper (sold)

05-21-2013, 08:37 AM	#3
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,541	Re: Roller into a trailer? Im doing the trailer also, I have a short fleet on my truck and found a short fleet for the trailer about 2 years ago. Now I just need time to do it. __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

05-22-2013, 10:10 AM	#5
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,541	Re: Roller into a trailer? I get that, Im planning on media blasting my frame (trailer) and the bed parts, then Ill start putting it together. I may have to purchase a couple cross braces because of the awful rust on these that came with the long bed. My trailer was a long bed, the bed was so far gone, I scrapped it. the only parts that were usable were two of the fender braces, everything else had bad holes and missing parts. __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

05-22-2013, 11:52 AM	#6
jesseo Registered User Join Date: Dec 2012 Location: Central Point Posts: 236	Re: Roller into a trailer? That is why I feel a little bad. This truck is in the beginning stages of being redone. The bodywork on the bed is great. The bed is straight and primed and ready for paint. I will pull it to prep and paint the frame. Pull my cab that is AWESOME and keep the title and vin plate for ???



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.