IL Heading to "The Big One" Swap Meet in Peotone, IL, this weekend, June 9, 2013

[Todd68Chevy]

This is a little late but I have been busy and thought I would go ahead and start this thread. I live in Southern Indiana but I am heading to the Tri Chevy Association Swap Meet in Peotone, IL on June 9th. I am going to be set up as a vendor spaces OSB 28, 29 & 30 and thought if someone needs something I might be able to bring it with me.

Tailgate- nice- $350.00

1971-72 Painted Front Bumper- SOLD

1967 Chevy/ GMC A/C dash $110.00 cut at the dash pad

1968-72 non A/C Dash $80.00 cut outside the windshield weld area

1969-1972 right front fender- some rust in the front pocket but repairable $40.00

1969-1972 left front fender- minor rust $40.00

1971-72? Woodgrain tailgate panel with letters- drivers condition-- Sold

1972 plastic door panels $25.00 and up, some with woodgrain- Black woodgrain set in the picture are sold

1967-71 metal door panels $25.00 and up

1967 Chevy/ GMC rust free right hand door- available $135.00 each O.B.O. no rust but does have dents

1967 Chevy Small Back window cab section $75.00

1969-1970 Chevy Hood surface rust under the front lip but solid $60.00

1971-1972 Chevy, 1969-1972 GMC Hood rust free but few dents SOLD

1967-1968 Chevy/ GMC Hood needs some repair to the front $100.00

High Hump bolt in transmission tunnel $40.00 and up

Dash Pad- usable shape but has been recovered SOLD

Dash Pad- Very nice shape- Maroon $120.00

Set of 4 GM Truck Rallies 6 lug 15x7 $100.00 each or $350.00 for all 4

Pair of GM Truck Rallies with NO caps, tires or rings 6 Lug 15x8 $55.00 for the pair

Set of 4 GM Truck Rallies with NO caps, tires or rings 5 Lug 15x8 $110.00 for all 4

Set of 4 Black Mod wheels WITH spinners, no tires 6 Lug 2- 15x7 & 2- 15x8 $125.00 for all 4

Manual Transmission Bell Housing $30.00

Automatic Transmission Crossmember $45.00

Automatic brake pedal assy. $25.00 each

Clutch/ Brake pedal assy. $35.00

1971- 1972 Chevy Grill- Decent condition- some dings and couple cracks in the inner SOLD

Cowl panels -- $20.00 with ant. hole
Cowl panel -- $45.00 with antenna delete (2 available)

1 1/16" sway bar with brackets $45.00

1972 Painted front bumper SOLD

1972 Right door - decent $50.00

Many, Many more parts.

I do not have very much good sheet metal other than what is listed and I have no 4wd items (other than the high humps listed above)

I am also looking for a rust free 67-68 Chevy core support. If you have one you would like to sell, please let me know a price and pictures.

After Friday June 7th, I will be away from email. You can call me at 812-564-0329 NO TEXTING-- I can not respond to text.

Let me now what you need and I will see if I have it and can get you a condition and price. I do not have room to bring it all so let me know what you are interested in. I will only gaurantee to hold an item with money down. Thanks for looking.

[xman]

sweet I'll be lookin for ya lookin for a 72 door panel worst condition you might have and if you are bringing it maybe this as well 1971-72? Woodgrain tailgate panel with letters- drivers condition
I'll keep an eye out for all the truck parts

[2002yanks]

hey todd, can i get one of the high humps? when you get back just send me a total and pp account again and i`ll get you the $$. forgot i needed to get one(for my extreme dropmember). any chance you have a set of 4 6 lug rally caps in good condition you would sell seperate?

[Todd68Chevy]

Originally Posted by xman

sweet I'll be lookin for ya lookin for a 72 door panel worst condition you might have and if you are bringing it maybe this as well 1971-72? Woodgrain tailgate panel with letters- drivers condition
I'll keep an eye out for all the truck parts

A re you looking for any certain color or style door panels? I have several sets and probably will not bring all of them. I will bring the tailgate panel but here is a few pictures. Thanks

Originally Posted by 2002yanks

hey todd, can i get one of the high humps? when you get back just send me a total and pp account again and i`ll get you the $$. forgot i needed to get one(for my extreme dropmember). any chance you have a set of 4 6 lug rally caps in good condition you would sell seperate?

I will see if I have a box the hump will fit in but the shipping will be pretty high because of its size and weight. I will check on it next week and let you know. I think I have 3 of the 4x4 style caps and I have newer style caps. Do you have a picture of what caps you are looking for? I willl check into it.

[xman]

tailgate panel looks good, as for the color of the door panel if you have black that will work if not any color will work . the reason I asked for the worst door panel you have is I am going to try to cover it with vinyl and do a inlay around the center section where the woodgrain section sits and I dont want to mess up the ones I have since they are in pretty good shape as is

[68shortfleet]

Todd, is the 1 1/4" sway bar for a 2wd? And which brackets are included, I am hoping for the frame stands?

2wd, frame stands included, I will take it pending shipping quote to 97115.

[Todd68Chevy]

Originally Posted by xman

tailgate panel looks good, as for the color of the door panel if you have black that will work if not any color will work . the reason I asked for the worst door panel you have is I am going to try to cover it with vinyl and do a inlay around the center section where the woodgrain section sits and I dont want to mess up the ones I have since they are in pretty good shape as is

I will bring the tail gate trim and some door panels along. I willPM you my phone number because I will probably not be able to get back on here until I get back home. Thanks

Originally Posted by 68shortfleet

Todd, is the 1 1/4" sway bar for a 2wd? And which brackets are included, I am hoping for the frame stands?

2wd, frame stands included, I will take it pending shipping quote to 97115.

Let me recheck what I have when I get home. I must have sold the one listed or measured wrong because the one I have off already is only measuring 1" and a chassis I have has one 1 1/16". I have a few others still on trucks so I will check on them next week and let you know. Thanks

[2002yanks]

todd, another high hump got bumped ttt on here and it was clean auto one. i jumped on it cause the shipped price was right. with needing it asap i couldnt pass it up. sorry. good luck selling at the meet.

heres a pic of the rally caps; looking for original ones in nice shape.
http://thumbs2.ebaystatic.com/d/l225...y09Mp45WHg.jpg

[Todd68Chevy]

Originally Posted by 2002yanks

todd, another high hump got bumped ttt on here and it was clean auto one. i jumped on it cause the shipped price was right. with needing it asap i couldnt pass it up. sorry. good luck selling at the meet.

heres a pic of the rally caps; looking for original ones in nice shape.
http://thumbs2.ebaystatic.com/d/l225...y09Mp45WHg.jpg

No problem, Thanks for letting me know. I will keep a look out for some caps.

[thelonerife]

Good luck with the swap meet Todd!

[Todd68Chevy]

Originally Posted by thelonerife

Good luck with the swap meet Todd!

Thanks Chuck. Have a good weekend.

[xman]

met with Todd at the swap meet and it was great talking/dealing with him on the parts
Thanks again for the parts and hope you did well at the swap meet

[starfire58]

Todd- It was nice to meet you yesterday at the swap meet. It's always nice to put a face with a name. Thanks for the sun visors, too! Hope you did ok at the meet. Bob

Keep an eye out for a bed side for me!

[Todd68Chevy]

Had a good time at the swap meet. Talked to a lot of guys and ladies and several of them were from the truck board . Sorry but I do not remember all of your names so I am not going to try to name all of you. We even told a few more guys about the site that did not know about it. I got a great deal from a local guy Saturday night on some 1946 Chevy truck parts that I needed and then he recommended a great pizza place for supper. The weather was good and I did sell more than I bought so that is always a good thing.

Originally Posted by xman

met with Todd at the swap meet and it was great talking/dealing with him on the parts
Thanks again for the parts and hope you did well at the swap meet

Great talking and dealing with you also. Hope your idea for the Suburban works out like you want. It sounds like it will look neat. Thanks for everything.

[Todd68Chevy]

Originally Posted by starfire58

Todd- It was nice to meet you yesterday at the swap meet. It's always nice to put a face with a name. Thanks for the sun visors, too! Hope you did ok at the meet. Bob

Keep an eye out for a bed side for me!

It was nice meeting, talking and dealing with you. Hopefully the lead on the bed we talked about yesterday will work out but if not you will find something and I will let you know if I find something.

[Rusty69]

I see you have a clutch/brake pedal assembly. Do you also have the z bar and bell crank to go with it. If you do, I'm interested. Price and shipping to 36092
Posted via Mobile Device

[Todd68Chevy]

Originally Posted by Rusty69

I see you have a clutch/brake pedal assembly. Do you also have the z bar and bell crank to go with it. If you do, I'm interested. Price and shipping to 36092
Posted via Mobile Device

I think I have the pivot, frame bracket and maybe the linkage but I do not have the ball that attaches to a small block where the pivot bar mounts. I have a 6 cylinder that has that part. It might be a few days before I can get pictures. Thanks

[Rusty69]

Ok. All those parts would be awesome. I can order the pivot ball from lmc. I haven't found any repro parts for the bell crank and other stuff. How much would you want for the pedal set and other stuff?
Posted via Mobile Device

[Rusty69]

Is the z bar from a 6 cal truck or 8 cal? I think they are different lengths
Posted via Mobile Device

[Rusty69]

6 cyl or 8 cyl
Posted via Mobile Device

[Todd68Chevy]

Originally Posted by 68shortfleet

Todd, is the 1 1/4" sway bar for a 2wd? And which brackets are included, I am hoping for the frame stands?

2wd, frame stands included, I will take it pending shipping quote to 97115.

It has been a busy week also, I will get the trucks checked as soon as I can but it will probably be this weekend. Sorry for the delay.

Originally Posted by Rusty69

I see you have a clutch/brake pedal assembly. Do you also have the z bar and bell crank to go with it. If you do, I'm interested. Price and shipping to 36092
Posted via Mobile Device

Originally Posted by Rusty69

Is the z bar from a 6 cal truck or 8 cal? I think they are different lengths
Posted via Mobile Device

The truck I have complete is a 6cyl. When I swapped my truck from 6 cyl. to V8, I think I used the same Z-bar. The V8 just has a ball and the 6 cyl. had a bracket that stuck out from the block and the ball was on the end of the bracket. I will get pictures of what I have as soon as I can but it will probably be this weekend. Thanks

[Todd68Chevy]

Originally Posted by 68shortfleet

Todd, is the 1 1/4" sway bar for a 2wd? And which brackets are included, I am hoping for the frame stands?

2wd, frame stands included, I will take it pending shipping quote to 97115.

Sorry 68shortfleet, I either measured wrong or sold them one I had listed because all 3 of the bars I have are all measuring 1 1/16" Sorry again.

[Todd68Chevy]

Originally Posted by Rusty69

I see you have a clutch/brake pedal assembly. Do you also have the z bar and bell crank to go with it. If you do, I'm interested. Price and shipping to 36092
Posted via Mobile Device

Still working on the shipping price but finally was able to get pictures. All prices are plus shipping cost.

Pedal assy. $35.00
Frame bracket $5.00
Linkage pivot $10.00 (this is from a 1969 c10 6 cylinder truck)
Rod from pedal to pivot $5.00
rod from pivot to clutch fork $3.00 (needs new part that attaches it to the pivot and the block that goes againt the clutch fork)

Thanks

[Rusty69]

Are all the parts from a 6cyl truck? I think the bellcrank and pedals are different between the two.
Posted via Mobile Device

[Todd68Chevy]

Originally Posted by Rusty69

Are all the parts from a 6cyl truck? I think the bellcrank and pedals are different between the two.
Posted via Mobile Device

The bell crank is from a 6 cyl. truck because I took it off last night. I do not remember which truck the pedal assy. is from. I think the 2 rods and the pedal assy. came out of a 1968 C20 V8 3 speed truck I had but I honestly do not remember a 100%. That has been several parts trucks ago. My best thought is if you think they are not correct then it would be better to wait until some show up that you can verify because I do not want to sell you the wrong thing.

I can see why the bell crank might be different but why would the pedal assy. be different between the 6 cyl. and V8 trucks? I really do not know the answer and would really like to know. I do have a clutch pedal setup in a 72 C10 that looks different than this one but I bought it with out engine and transmission so I do not know what it had originally either.