TX 1966 bbw cab and doors for sale

[Johns66]

I have a big back window cab, doors, frame and other parts for sale.

The doors are both very straight and have the interior panels on them. The drivers side has a factory arm rest. $150 each

Gas tank $40

Fairly nice cab with what appears to be the original paint with the factory markings on the firewall. Cab also has front and back glass. I will include the front chrome windshield trim with clips (nice condition) if someone buys the cab (doors sold separately). $475

Sorry for the upside down pictures cannot seem to get them right side up.

John

Waco, Texas

[rawraw67]

Hey john will you sell just the door panals?

[thedirty1]

Would you ship the cab?
Posted via Mobile Device

[Metalaroundstone]

I am interested in the passenger door. Do you have pictures of it? Any rust? I am in Austin and could pick it up.

[McCoyAZ]

Turned them over for you.

[Johns66]

Thanks for turning those over for me.

[Johns66]

RawRaw67 Here are pictures of the panels they are pretty nice. Do not see any dents on them original paint.

Sorry for the delay my son had an accident a few weeks ago with his Nissan and I was having to finish up his rear suspension today.

John

[Johns66]

Metalaroundstone I can get you more pictures of the passenger side door tomorrow afternoon. As I recall it is pretty solid with no rust through, but I need to run my hand over the door skin.

I could probably meet you in Round Rock in La Fronterra shopping center or somewhere tomorrow or one night this week.

[Johns66]

thedirty1 I sent you a private message.

John

[Johns66]

Here are pictures of the passenger side door, the inside and underneath the door is very clean. There is one bad spot on the outside of the door towards the bottom on the left side (see top picture). Towards the top there is a spot of bondo but I cannot tell what it is hiding (see middle picture).

John

[ChevyJr]

Would you be willing to sell the transmission floor pan/cover out of that cab? Thanks.

[Johns66]

If no one makes me an offer for the cab by the end of this coming weekend I will be willing to part the cab and chassis out.
Posted via Mobile Device

[kpc01]

I'm looking for a high hump and firewall piece tranny cover if its got that. I live in DFW so could pick up in Waco on my next time through.

[Johns66]

thedirty1 you have first dibs on the cab since you inquired first, I will post pictures of any problem areas I find tomorrow night.

rawraw67 pm sent regarding payment of the door panels pictured.

[rawraw67]

John are they going to be the panels that are on the doors?

[Johns66]

Areas of rust are one spot at the very bottom middle at the back of the cab, the corners of both floor boards rust through on both sides. Rust on drivers side and passenger side floor boards where you put your feet.

The drivers side rocker panel is rusted through where the edge meets the floor. The middle section of the floor and where the seat was is in good shape.

[Johns66]

Rawraw67 I sent you a private message.

[gixxer711]

Does this have a high hump tunnel?
Posted via Mobile Device
Posted via Mobile Device

[Johns66]

No this truck did not have the high hump.

Thanks

[Johns66]

Picture of transmission tunnel

[severedchris]

so what all do you have left?

[ChevyJr]

Could I get a top view of it. I'm more or leas concerned about the edges/sides of the piece. Thanks
Posted via Mobile Device

[Johns66]

I have the whole cab including front chrome windshield trim and dash intact including deluxe heater controls. Gas tank, V8 motor mounts, frame, both doors and glass minus door panels which I am trying to remove for Rawraw67. Chrome front bumper and grill guard.
Posted via Mobile Device

[Johns66]

Note: heater control levers broke.
Posted via Mobile Device

[Johns66]

Rawraw67 I was able to get the door panels off the truck today, here are pictures.

One was slightly damaged by my grinder when I had to cut the arm rest off to remove the panel. Please let me know if you want this set or the set pictured above.