AZ Left Over Parts

[gerfunken]

Ok, so I'm currently re-powering my 1972 Chevy K-20 and will end up with some left-over parts...

I'm in north-west Phoenix, out in Surprise. I can't deliver anything (since the truck's not running at this time.) The truck was my home yard-work & camping rig. I only drove it about 1000-1200 miles a year, some 4x4'ing, but nothing heavy duty.

Shipping is not going to be easy for me to do, but for the smaller stuff, let's see what we can do about it.

Engine: $2000 OBO GM Crate 350 HO Deluxe purchased in October 2005, less than 6000 miles on it, ran great (see if I can get a video), but it's just not a diesel. I will be keeping the A/C compressor.
HP = 330@5500 RPM
TQ = 380@3800 RPM




Externally balanced flywheel, pressure plate & clutch. (Purchased 2006) $50


SM-465 & NP-205. $750 OBO Both were rebuilt in Jan/Feb of 2006 before I installed them with the new engine.



Z-bar $25 (purchased in 2003)
Headers $50 - that clear the assembly.
Starter $40 (2006)
Master cylinder & power booster $50 (2007)



Front Fenders, $25/ea - a little rough, right side worse than left.


Tail Gate... $50 - rhino lined on the inside, slightly bowed and bumped up, you can see the bumps in the picture.


Passenger door. $50 - Little bit of rust across the bottom, it does have a 6x9 speaker hole cut in it, and the outside lower has some deformity. (best fixed with a lower skin)


Things that I don't have pictures of, and will be coming soon are the front and rear axles. D-44, 4:10 gears & H052 with matching gears.

Simply put, it's pretty much the entire driveline as I'll be converting this over to a Cummins with the matching drive line. This is going to be local pick-up only, PM me if interested and make me an offer.

[t korinek]

I'd be interested when you figure out what you'd have to have for the drive train & mechanical parts.
Or have parts to trade too. .
Tom

[WIDESIDE72]

I was wondering if you were running a vintage air a/c and if so if the rubber compressor lines and hard line were for sale. If so, price shipped to leander tx 78641
Posted via Mobile Device

[gerfunken]

Originally Posted by WIDESIDE72

I was wondering if you were running a vintage air a/c and if so if the rubber compressor lines and hard line were for sale. If so, price shipped to leander tx 78641
Posted via Mobile Device

Sorry, but the vintage air components are being reused in the conversion.

[gerfunken]

Originally Posted by t korinek

I'd be interested when you figure out what you'd have to have for the drive train & mechanical parts.
Or have parts to trade too. .
Tom

Tom, please PM me. There may be a thing or two I'm still on the look-out for.

[laplander]

How much for the engine?

[gerfunken]

t korinek has the first bid on this... will let you know.

Originally Posted by laplander

How much for the engine?

[zellway]

Add me to the list for the motor, That is is Tom has not already got it.

[t korinek]

Hey I'm going to pass on the engine, I do have a suburban or blazer 2nd gen rear tank I'll make you a good on though or would trade you for something else.
Thanks
Tom

[truckdude239]

please post prices as per the form rules thanks

[gerfunken]

Originally Posted by laplander

How much for the engine?

Laplander, you're up for the engine, Tom passed. Prices inline.

Originally Posted by zellway

Add me to the list for the motor, That is is Tom has not already got it.

Zellway, you've got next dibs if Laplander passes.

[tdkosta]

Any dents or rust on the passenger fender?

[tdkosta]

Interested in the engine if it gets to me.

I've got a pool heater if you're interested in a partial trade.

[zellway]

Originally Posted by gerfunken

Laplander, you're up for the engine, Tom passed. Prices inline.


Zellway, you've got next dibs if Laplander passes.

Sounds good.

[jjzepplin]

Interested in the clutch. Why is it external balanced? 400 crank?

[gerfunken]

Originally Posted by tdkosta

Any dents or rust on the passenger fender?

Here's pictures of the passenger fender... dents, yes, rust, nothing more than surface.

[gerfunken]

Originally Posted by jjzepplin

Interested in the clutch. Why is it external balanced? 400 crank?

If I recall correctly, the 2004 year crate engine is an externally balanced engine. It had originally come with the flex plate for an automatic, and I needed to change it out. My original flywheel wouldn't work because the engine was internally balanced, and the new one was externally balanced.

[tdkosta]

Thanks for the pics of the fender. I'll pass on it.

[jjzepplin]

Originally Posted by gerfunken

If I recall correctly, the 2004 year crate engine is an externally balanced engine. It had originally come with the flex plate for an automatic, and I needed to change it out. My original flywheel wouldn't work because the engine was internally balanced, and the new one was externally balanced.

I am looking for external so I would need to know.

[Rusty69]

Is the clutch pedal set and rods all available with the z bar? And if so! How much? Shipping would be to 36092
Posted via Mobile Device

[gerfunken]

Originally Posted by Rusty69

Is the clutch pedal set and rods all available with the z bar? And if so! How much? Shipping would be to 36092
Posted via Mobile Device

Not yet, but it may be soon. Let me get back to you on the prices and the shipping.
Posted via Mobile Device

[Rusty69]

I found a place online that sells the stuff. It would be cool to get it all from the same place.
Posted via Mobile Device