AZ 1984 Crew Cab Dually part out - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dwntwn · 06-11-2013, 03:01 PM

Not much left before it goes over the scales, fellas. Attached are some pictures, if there is something specific you want, hit me up. This was a running, driving truck, the motor and transmission are gone, steering box sold, exhaust sold.
What I have left:
• Tilt column with key $75 plus shipping, will include wheel. Horn button missing some tabs, very little play in column itself.
• Sliding rear window: $50 plus shipping. The gasket is pretty dry, don't think it can be saved.
• Seats: Rear seat $100 plus shipping. Front seat has middle fold-down. I'm planning to keep this and use it for something else, would sell it for $300 plus shipping
• Doors are manual glass, power locks (weird) speaker holes cut in all, was planning to junk the doors. The regulators work, $15 each + shipping
• Glass: Windshield cracked, other glass good, $25 for any piece, including vent assemblies, plus shipping
• Brake/suspension parts: I'll sell pretty much whatever anyone needs— the killer would be the shipping due to the weight, though.

I'll most likely have the truck the rest of this week, its already loaded on the trailer, pretty much ready to go after after I pull a few more things.

owner 84 · 06-11-2013, 03:33 PM

How do the front seat belts (passenger & driver side) look like?

dwntwn · 06-11-2013, 03:50 PM

Owner 84:
Both sides work, extend and retract, the belts are stiff, the driver side has some fraying

dwntwn · 06-26-2013, 10:56 AM

Last chance, its going away this week!

**old Rusty C10** · 06-26-2013, 06:55 PM

is the right vent wiondow assembly any good and if so how much shipped to NJ

dwntwn · 06-26-2013, 07:54 PM

It looks ok, the gasket is kind of dried out, the glass is intact, has some surface rust, how about $50 ground shipped to NJ?

**old Rusty C10** · 06-27-2013, 09:00 AM

as long as the bottom is good that's where mine is broken... where it attaches to the frame.. do you have paypal?

dwntwn · 06-27-2013, 10:57 AM

ok I'll pull the part and confirm everything looks good on it first, I'll try to get it pulled before the end of today.
I do have Paypal

dwntwn · 06-27-2013, 07:18 PM

I pulled it out, looks good to me!

BONUSCAB · 06-29-2013, 11:29 PM

Is this truck still up for grabs? I'm looking for the sill plates and I NEED the last 6 inches of the rear frame rails.

dwntwn · 06-30-2013, 12:04 AM

Hey Bonus,
I still have it, but am out of town tomorrow, I will check on the sill plates and get back to you Monday morning.

Far as the frame rails, yes, I can do that, let me take a look at it. Whats your shipping zip? I can figure out a price with shipping
Thanks
~Dave

Truck Guy99 · 06-30-2013, 05:50 PM

Do you have title? How much for the whole frame, axles, gas tank, etc. Basically everything but the body.....
Posted via Mobile Device

BONUSCAB · 06-30-2013, 06:34 PM

My shipping zip is 53207. I can give you a business zip if that helps. Basically I just need the end sections passed the rear most cross-member. Thanks!

dwntwn · 06-30-2013, 09:31 PM

No papers, this is a parts truck only, sale pending on the rear section of the frame

Quote:

Originally Posted by Truck Guy99

Do you have title? How much for the whole frame, axles, gas tank, etc. Basically everything but the body.....
Posted via Mobile Device

dwntwn · 06-30-2013, 09:32 PM

Ok Bonus, I'll check those sills out, let you know shipping tomorrow

Quote:

Originally Posted by BONUSCAB

My shipping zip is 53207. I can give you a business zip if that helps. Basically I just need the end sections passed the rear most cross-member. Thanks!

dwntwn · 07-01-2013, 01:05 PM

Bonus: pm sent

owner 84 · 07-01-2013, 02:06 PM

How clean are the rear seat belts?
Posted via Mobile Device

dwntwn · 07-01-2013, 02:29 PM

Hey Owner,
Nicer than the fronts!

The P.O. had them tied in a knot to keep them from retracting all the way into the cover—thats the only part that looks dirty, I just untied the knot, the belts are wrinkled, don't know if that would eventually go away.
If you want them $40 including shipping cont US

BONUSCAB · 07-01-2013, 04:22 PM

PM replied to.

owner 84 · 07-01-2013, 05:45 PM

It is clean but not the same as regular cab seat belt with 3 point.
Posted via Mobile Device

Leroy-B1 · 08-10-2013, 03:11 PM

Have the frame motor mounts?
Posted via Mobile Device

dwntwn · 08-11-2013, 12:27 PM

Sorry, that truck is long gone

06-11-2013, 03:01 PM	#1
dwntwn Registered User Join Date: Oct 2012 Location: Tucson, AZ Posts: 101	1984 Crew Cab Dually part out Not much left before it goes over the scales, fellas. Attached are some pictures, if there is something specific you want, hit me up. This was a running, driving truck, the motor and transmission are gone, steering box sold, exhaust sold. What I have left: • Tilt column with key $75 plus shipping, will include wheel. Horn button missing some tabs, very little play in column itself. • Sliding rear window: $50 plus shipping. The gasket is pretty dry, don't think it can be saved. • Seats: Rear seat $100 plus shipping. Front seat has middle fold-down. I'm planning to keep this and use it for something else, would sell it for $300 plus shipping • Doors are manual glass, power locks (weird) speaker holes cut in all, was planning to junk the doors. The regulators work, $15 each + shipping • Glass: Windshield cracked, other glass good, $25 for any piece, including vent assemblies, plus shipping • Brake/suspension parts: I'll sell pretty much whatever anyone needs— the killer would be the shipping due to the weight, though. I'll most likely have the truck the rest of this week, its already loaded on the trailer, pretty much ready to go after after I pull a few more things. Attached Images __________________ _____________________________________________ 1966 c10, short fleet, 402ci 700r4 1988 r20 Suburban 454ci tbi, th400 (12v Cummins soon) 1980 shovelhead, hardtail, open primary 1998 FXDWG

06-11-2013, 03:33 PM	#2
owner 84 Registered User Join Date: Jul 2011 Location: NY Posts: 263	Re: 1984 Crew Cab Dually part out How do the front seat belts (passenger & driver side) look like? __________________ email me @ nasser_060@hotmail.com and Check out my flicker @ http://www.flickr.com/photos/0060/

06-11-2013, 03:50 PM	#3
dwntwn Registered User Join Date: Oct 2012 Location: Tucson, AZ Posts: 101	Re: 1984 Crew Cab Dually part out Owner 84: Both sides work, extend and retract, the belts are stiff, the driver side has some fraying Attached Images __________________ _____________________________________________ 1966 c10, short fleet, 402ci 700r4 1988 r20 Suburban 454ci tbi, th400 (12v Cummins soon) 1980 shovelhead, hardtail, open primary 1998 FXDWG

06-26-2013, 10:56 AM	#4
dwntwn Registered User Join Date: Oct 2012 Location: Tucson, AZ Posts: 101	Re: 1984 Crew Cab Dually part out Last chance, its going away this week! __________________ _____________________________________________ 1966 c10, short fleet, 402ci 700r4 1988 r20 Suburban 454ci tbi, th400 (12v Cummins soon) 1980 shovelhead, hardtail, open primary 1998 FXDWG

06-26-2013, 06:55 PM	#5
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,277	Re: 1984 Crew Cab Dually part out is the right vent wiondow assembly any good and if so how much shipped to NJ __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

06-26-2013, 07:54 PM	#6
dwntwn Registered User Join Date: Oct 2012 Location: Tucson, AZ Posts: 101	Re: 1984 Crew Cab Dually part out It looks ok, the gasket is kind of dried out, the glass is intact, has some surface rust, how about $50 ground shipped to NJ? Attached Images __________________ _____________________________________________ 1966 c10, short fleet, 402ci 700r4 1988 r20 Suburban 454ci tbi, th400 (12v Cummins soon) 1980 shovelhead, hardtail, open primary 1998 FXDWG

06-27-2013, 09:00 AM	#7
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,277	Re: 1984 Crew Cab Dually part out as long as the bottom is good that's where mine is broken... where it attaches to the frame.. do you have paypal? __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

06-27-2013, 10:57 AM	#8
dwntwn Registered User Join Date: Oct 2012 Location: Tucson, AZ Posts: 101	Re: 1984 Crew Cab Dually part out ok I'll pull the part and confirm everything looks good on it first, I'll try to get it pulled before the end of today. I do have Paypal __________________ _____________________________________________ 1966 c10, short fleet, 402ci 700r4 1988 r20 Suburban 454ci tbi, th400 (12v Cummins soon) 1980 shovelhead, hardtail, open primary 1998 FXDWG

06-27-2013, 07:18 PM	#9
dwntwn Registered User Join Date: Oct 2012 Location: Tucson, AZ Posts: 101	Re: 1984 Crew Cab Dually part out I pulled it out, looks good to me! Attached Images __________________ _____________________________________________ 1966 c10, short fleet, 402ci 700r4 1988 r20 Suburban 454ci tbi, th400 (12v Cummins soon) 1980 shovelhead, hardtail, open primary 1998 FXDWG

06-29-2013, 11:29 PM	#10
BONUSCAB Registered User Join Date: Jan 2013 Location: east troy, WI Posts: 341	Re: 1984 Crew Cab Dually part out Is this truck still up for grabs? I'm looking for the sill plates and I NEED the last 6 inches of the rear frame rails.

06-30-2013, 12:04 AM	#11
dwntwn Registered User Join Date: Oct 2012 Location: Tucson, AZ Posts: 101	Re: 1984 Crew Cab Dually part out Hey Bonus, I still have it, but am out of town tomorrow, I will check on the sill plates and get back to you Monday morning. Far as the frame rails, yes, I can do that, let me take a look at it. Whats your shipping zip? I can figure out a price with shipping Thanks ~Dave __________________ _____________________________________________ 1966 c10, short fleet, 402ci 700r4 1988 r20 Suburban 454ci tbi, th400 (12v Cummins soon) 1980 shovelhead, hardtail, open primary 1998 FXDWG

06-30-2013, 05:50 PM	#12
Truck Guy99 Registered User Join Date: Aug 2011 Location: Elk City, OK Posts: 332	Re: 1984 Crew Cab Dually part out Do you have title? How much for the whole frame, axles, gas tank, etc. Basically everything but the body..... Posted via Mobile Device __________________ My names Tye. No Chevy right now

06-30-2013, 06:34 PM	#13
BONUSCAB Registered User Join Date: Jan 2013 Location: east troy, WI Posts: 341	Re: 1984 Crew Cab Dually part out My shipping zip is 53207. I can give you a business zip if that helps. Basically I just need the end sections passed the rear most cross-member. Thanks!

07-01-2013, 01:05 PM	#16
dwntwn Registered User Join Date: Oct 2012 Location: Tucson, AZ Posts: 101	Re: 1984 Crew Cab Dually part out Bonus: pm sent __________________ _____________________________________________ 1966 c10, short fleet, 402ci 700r4 1988 r20 Suburban 454ci tbi, th400 (12v Cummins soon) 1980 shovelhead, hardtail, open primary 1998 FXDWG

07-01-2013, 02:06 PM	#17
owner 84 Registered User Join Date: Jul 2011 Location: NY Posts: 263	Re: 1984 Crew Cab Dually part out How clean are the rear seat belts? Posted via Mobile Device __________________ email me @ nasser_060@hotmail.com and Check out my flicker @ http://www.flickr.com/photos/0060/



Register or Log In To remove these advertisements.

07-01-2013, 02:29 PM	#18
dwntwn Registered User Join Date: Oct 2012 Location: Tucson, AZ Posts: 101	Re: 1984 Crew Cab Dually part out Hey Owner, Nicer than the fronts! The P.O. had them tied in a knot to keep them from retracting all the way into the cover—thats the only part that looks dirty, I just untied the knot, the belts are wrinkled, don't know if that would eventually go away. If you want them $40 including shipping cont US Attached Images __________________ _____________________________________________ 1966 c10, short fleet, 402ci 700r4 1988 r20 Suburban 454ci tbi, th400 (12v Cummins soon) 1980 shovelhead, hardtail, open primary 1998 FXDWG

07-01-2013, 04:22 PM	#19
BONUSCAB Registered User Join Date: Jan 2013 Location: east troy, WI Posts: 341	Re: 1984 Crew Cab Dually part out PM replied to.

07-01-2013, 05:45 PM	#20
owner 84 Registered User Join Date: Jul 2011 Location: NY Posts: 263	Re: 1984 Crew Cab Dually part out It is clean but not the same as regular cab seat belt with 3 point. Posted via Mobile Device __________________ email me @ nasser_060@hotmail.com and Check out my flicker @ http://www.flickr.com/photos/0060/

08-10-2013, 03:11 PM	#21
Leroy-B1 Registered User Join Date: Dec 2010 Location: Mars Hill, NC Posts: 1,994	Re: 1984 Crew Cab Dually part out Have the frame motor mounts? Posted via Mobile Device

08-11-2013, 12:27 PM	#22
dwntwn Registered User Join Date: Oct 2012 Location: Tucson, AZ Posts: 101	Re: 1984 Crew Cab Dually part out Sorry, that truck is long gone __________________ _____________________________________________ 1966 c10, short fleet, 402ci 700r4 1988 r20 Suburban 454ci tbi, th400 (12v Cummins soon) 1980 shovelhead, hardtail, open primary 1998 FXDWG

Register or Log In To remove these advertisements.