Under Dash Pic request! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

yfs200p · 06-12-2013, 11:37 AM

Hi folks, I am just starting to run my AAW Classic update kit in my K10 resto project. The first step in the instructions tells me to run the harness under the dash in the stock location with the stock fasteners. One problem: I cant remember how the heck it went, or how it was attached! IF anyone could drum up some photos of the stock wire harness routing, that would be great. Thanks

Agent915 · 06-12-2013, 05:45 PM

Its been a LONG time since I pulled what wiring was left in my truck so this will be helpful. I plan on running the same AAW kit. Let me know how it goes!

Danny

**Already Gone** · 06-12-2013, 05:56 PM

Subscribed

elf w/capital T · 06-12-2013, 06:19 PM

Quote:

Originally Posted by Already Gone

Subscribed

Mee too!

**truckdude239** · 06-12-2013, 06:30 PM

There where bendly hangers i mine it juzt laid right out
Posted via Mobile Device

71sixgun · 06-12-2013, 07:16 PM

Pardon my ignorance, but what does AAW stand for? I may need to do some rewiring in mine soon.

**cericd** · 06-12-2013, 07:34 PM

Quote:

Originally Posted by 71sixgun

Pardon my ignorance, but what does AAW stand for? I may need to do some rewiring in mine soon.

A quick Google search of "AAW Classic" brought up http://www.americanautowire.com/

yfs200p · 06-12-2013, 09:43 PM

We have some interest in this, I know one of you guys cruising an all-original pickup is willing to grab some pics of under the dash, TTT!
Posted via Mobile Device

TonyJohnson · 06-12-2013, 09:51 PM

Let's see them. Mine is a bit of a mess...

DorianB · 06-13-2013, 12:49 PM

There are / were some clips along the top of the dash cluster opening that my original wires are using to run over to the ignition.

I'll be getting my wires in a week or so and I can give clear pictures of old / new then.

BurnoutNova · 06-13-2013, 12:57 PM

Quote:

Originally Posted by yfs200p

We have some interest in this, I know one of you guys cruising an all-original pickup is willing to grab some pics of under the dash, TTT!
Posted via Mobile Device

My K10 is all original, I can try and get some pics this weekend if noone else has any by then.

I don't know how much detail you will be able to see since it is all assembled, but I can try!

Lee H · 06-13-2013, 01:01 PM

I don't have any pictures but here's some advice. You need to get the steering column & parking break installed, then once you get the harness connectors to the right place and plugged in there will not be much in the way of hanging wires. It pretty much falls into place. There are a few tabs that hold the harness & I used a number of wire ties to bundle and secure were needed. AAW did a great job of putting this together and at the right lengths.

SHANE 73Z · 06-13-2013, 01:16 PM

Quote:

Originally Posted by Lee H

I don't have any pictures but here's some advice. You need to get the steering column & parking break installed, then once you get the harness connectors to the right place and plugged in there will not be much in the way of hanging wires. It pretty much falls into place. There are a few tabs that hold the harness & I used a number of wire ties to bundle and secure were needed. AAW did a great job of putting this together and at the right lengths.

This^^^

I just finished my install & will get some pics up tonight.

I highly agree that you should get at least the pedal box in place. I am very pleased with how easy the AAW kit installed as far as the underdash components.

Shane

yfs200p · 06-13-2013, 07:51 PM

Ok, my logic was backwards. I was thinking of running the wires before the pedals and steering column were in my way. Still looking forward to some pics
Posted via Mobile Device

Don Quixote · 06-15-2013, 10:50 PM

I instaled the same kit in my rig last year but I got Barney style instructions on how to do so. I did try to take a few pictures but they were ineffective and I would have to pull half my dash apart to make the pics worthwhile. If I manage to find the diagrams, I can scan them if I find a scanner that takes the legal sized sheets.

Howitzer · 06-15-2013, 11:52 PM

Not the greatest in detail, but at any rate better than nothing!?

You'll see the steering column harness off to the left a bit. On the right side is the dash cluster plug, most of the wire seemed to run either right under where the the dash pad would sit right at the front lip (there are some metal tabs that hold the wire) or down on the inner piece of the dash (radio wires, glove box lights, etc.) there are also grounds that tie into these spots. Hope this helps.

SHANE 73Z · 06-17-2013, 10:05 PM

Sorry I am so late with this.

Here is the AAW harness installed and mostly secured & routed.

The AAW is tough as the main underdash wiring comes stright up out of the fuse box.

Let me know if there are any specific questions.

Shane

SHANE 73Z · 06-17-2013, 10:10 PM

Just to describe a little. Also a couple of points.

The main portion is routed under the cowl & up to the clip in the middle of the cluster opening.

I was a little disappointed that the wire length on the horn relay did not reach the original mounting point. I had to double side tape the new one just to the left of the headlight switch.

The lower bundle of wiring is the 6 additional circuits. Also in front of the duct are the 3 gauge connectors. One is gauge lights, one is specific gauges, the other is the wiring for an electronic speedo.

Shane

06-12-2013, 11:37 AM	#1
yfs200p E.H.F.D Engine #2 Join Date: Feb 2003 Location: East Hampton, NY Long Island Posts: 916	Under Dash Pic request! Hi folks, I am just starting to run my AAW Classic update kit in my K10 resto project. The first step in the instructions tells me to run the harness under the dash in the stock location with the stock fasteners. One problem: I cant remember how the heck it went, or how it was attached! IF anyone could drum up some photos of the stock wire harness routing, that would be great. Thanks __________________ -NICK '72 K10 SWB Fleetside. Avocado Highlander 350-4speed-NP205 Frame Off Re-Creation '89 GMC V3500 C/C Flatbed Plow Truck 454/SM465/Np205 '15 Chevy 2500HD CCSB High Country Duramax '22 Tahoe Premier Duramax

06-12-2013, 05:45 PM	#2
Agent915 Registered User Join Date: Oct 2009 Location: Alabama Posts: 228	Re: Under Dash Pic request! Its been a LONG time since I pulled what wiring was left in my truck so this will be helpful. I plan on running the same AAW kit. Let me know how it goes! Danny

06-12-2013, 05:56 PM	#3
Already Gone 70+ ( Old Skool Club ) Join Date: Nov 2003 Location: Saskatoon, Saskatchewan ,Canada Posts: 9,108	Re: Under Dash Pic request! Subscribed __________________ 1972 C10 Custom/Deluxe 613 Highlander 406/700R4 1999 White Tahoe LS 4x2 with Z56 Police Package 1992 K1500 GMC Suburban Members I have personally met: MusicMan70 - HeavyD - ChewyChevy67 - StingRay -71SWB4x4 - 67 Burb - DeadheadNM - too much stuff - bc65 - das601 " Circumsatances Do Not Change Responsibility " " The Sky is not the Limit, Your Mind is." Marilyn Monroe .. RIP Charlie Watts 1941 - 2021

06-12-2013, 06:30 PM	#5
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,232	Re: Under Dash Pic request! There where bendly hangers i mine it juzt laid right out Posted via Mobile Device __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

06-12-2013, 07:16 PM	#6
71sixgun Registered User Join Date: Mar 2013 Location: Clifton, Maine Posts: 86	Re: Under Dash Pic request! Pardon my ignorance, but what does AAW stand for? I may need to do some rewiring in mine soon.

06-12-2013, 09:43 PM	#8
yfs200p E.H.F.D Engine #2 Join Date: Feb 2003 Location: East Hampton, NY Long Island Posts: 916	Re: Under Dash Pic request! We have some interest in this, I know one of you guys cruising an all-original pickup is willing to grab some pics of under the dash, TTT! Posted via Mobile Device __________________ -NICK '72 K10 SWB Fleetside. Avocado Highlander 350-4speed-NP205 Frame Off Re-Creation '89 GMC V3500 C/C Flatbed Plow Truck 454/SM465/Np205 '15 Chevy 2500HD CCSB High Country Duramax '22 Tahoe Premier Duramax

06-12-2013, 09:51 PM	#9
TonyJohnson Registered User Join Date: Mar 2003 Location: Cheboygan, MI Posts: 998	Re: Under Dash Pic request! Let's see them. Mine is a bit of a mess... __________________ Tony Johnson -- '71 Blazer w/L-31 Vortec 350, SM465, NP205, performer intake, edelbrock 1406, HEI, 4" lift, Boyd EFI tank, Vintage A/C My Blazer --

06-13-2013, 12:49 PM	#10
DorianB Registered User Join Date: Apr 2010 Location: Buford, Ga Posts: 205	Re: Under Dash Pic request! There are / were some clips along the top of the dash cluster opening that my original wires are using to run over to the ignition. I'll be getting my wires in a week or so and I can give clear pictures of old / new then. __________________ In my opinion, it works best to have the seat out so you have room to flop your body around while standing on your head. -ashx2

06-13-2013, 01:01 PM	#12
Lee H Registered User Join Date: Jun 2010 Location: Upland Ca Posts: 4,142	Re: Under Dash Pic request! I don't have any pictures but here's some advice. You need to get the steering column & parking break installed, then once you get the harness connectors to the right place and plugged in there will not be much in the way of hanging wires. It pretty much falls into place. There are a few tabs that hold the harness & I used a number of wire ties to bundle and secure were needed. AAW did a great job of putting this together and at the right lengths. __________________ 1972 C10 SWB, Air, PS, PB, 350/350THM. Second owner. 1965 Corvette roadster, 44K miles, 327/365 SHP, 4 speed, side exhaust, knockoffs, teak, second owner (bought in 1970), Have ALL numbers matching components. My frame off restoration thread: http://67-72chevytrucks.com/vboard/s...d.php?t=556703

06-13-2013, 07:51 PM	#14
yfs200p E.H.F.D Engine #2 Join Date: Feb 2003 Location: East Hampton, NY Long Island Posts: 916	Re: Under Dash Pic request! Ok, my logic was backwards. I was thinking of running the wires before the pedals and steering column were in my way. Still looking forward to some pics Posted via Mobile Device __________________ -NICK '72 K10 SWB Fleetside. Avocado Highlander 350-4speed-NP205 Frame Off Re-Creation '89 GMC V3500 C/C Flatbed Plow Truck 454/SM465/Np205 '15 Chevy 2500HD CCSB High Country Duramax '22 Tahoe Premier Duramax

06-15-2013, 10:50 PM	#15
Don Quixote Registered User Join Date: May 2008 Location: Woodlawn, TN Posts: 275	Re: Under Dash Pic request! I instaled the same kit in my rig last year but I got Barney style instructions on how to do so. I did try to take a few pictures but they were ineffective and I would have to pull half my dash apart to make the pics worthwhile. If I manage to find the diagrams, I can scan them if I find a scanner that takes the legal sized sheets. __________________ Rocinante: 1972 GMC C25, 292, SM465, 14 bolt, power nothing, 440k and still handles my PCS moves Jorge: Kia Roller-skate with lots of buttons for the wife Wovoka: 2017 Indian Chief Vintage, better on gas but not much So far, this is the oldest I've ever been.

06-15-2013, 11:52 PM	#16
Howitzer Registered User Join Date: Feb 2012 Location: Calgary, Alberta Posts: 135	Re: Under Dash Pic request! Not the greatest in detail, but at any rate better than nothing!? You'll see the steering column harness off to the left a bit. On the right side is the dash cluster plug, most of the wire seemed to run either right under where the the dash pad would sit right at the front lip (there are some metal tabs that hold the wire) or down on the inner piece of the dash (radio wires, glove box lights, etc.) there are also grounds that tie into these spots. Hope this helps. Attached Images

06-17-2013, 10:05 PM	#17
SHANE 73Z Registered User Join Date: Apr 2008 Location: Pittsburgh, PA Posts: 144	Re: Under Dash Pic request! Sorry I am so late with this. Here is the AAW harness installed and mostly secured & routed. The AAW is tough as the main underdash wiring comes stright up out of the fuse box. Let me know if there are any specific questions. Shane

06-17-2013, 10:10 PM	#18
SHANE 73Z Registered User Join Date: Apr 2008 Location: Pittsburgh, PA Posts: 144	Re: Under Dash Pic request! Just to describe a little. Also a couple of points. The main portion is routed under the cowl & up to the clip in the middle of the cluster opening. I was a little disappointed that the wire length on the horn relay did not reach the original mounting point. I had to double side tape the new one just to the left of the headlight switch. The lower bundle of wiring is the 6 additional circuits. Also in front of the duct are the 3 gauge connectors. One is gauge lights, one is specific gauges, the other is the wiring for an electronic speedo. Shane



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.