NC Driveshaft, window seals - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Bhelton · 06-12-2013, 08:58 PM

First is a drive shaft from a 67 that has been professionally cut and balanced to fit a swb, sbc th400 truck. Everything done by Carolina powertrain
Asking $100 plus shipping
Second is front and rear window rubbers for big back glass and both accept chrome trim new never installed $70 for both plus shipping
Posted via Mobile Device

Undone · 06-12-2013, 09:05 PM

What brand and year are window rubbers for?

Bhelton · 06-12-2013, 09:08 PM

Precision and 71-72
Posted via Mobile Device

ecgate · 06-12-2013, 09:19 PM

Can you get me the length of the drive shaft? Center of u-joint to center of u-joint will work.

Bhelton · 06-12-2013, 09:21 PM

Yes
Posted via Mobile Device

Undone · 06-12-2013, 09:24 PM

I would do 65.00 shipped for both window rubbers.

Bhelton · 06-12-2013, 09:25 PM

Quote:

Originally Posted by Undone

I would do 65.00 shipped for both window rubbers.

How bout $70 shipped. Basically asking price with no free shipping
Posted via Mobile Device

Bhelton · 06-12-2013, 10:02 PM

Quote:

Originally Posted by ecgate

Can you get me the length of the drive shaft? Center of u-joint to center of u-joint will work.

52"
Posted via Mobile Device

Bhelton · 06-13-2013, 03:19 PM

Up
Posted via Mobile Device

ecgate · 06-13-2013, 06:36 PM

Quote:

Originally Posted by Bhelton

52"
Posted via Mobile Device

Thanks for getting me that measurement but im going to have to pass because it is gonna be too short for what I need.

Bhelton · 06-13-2013, 06:54 PM

Quote:

Originally Posted by ecgate

Thanks for getting me that measurement but im going to have to pass because it is gonna be too short for what I need.

No problem!
Just out of curiosity what combo you running?
Posted via Mobile Device

ecgate · 06-13-2013, 07:03 PM

Quote:

Originally Posted by Bhelton

No problem!
Just out of curiosity what combo you running?
Posted via Mobile Device

Im running a bbc with a th400. Im using the POL tubular motor mounts and stands. I think they move the motor closer to the front end a couple inches. Not sure but it looks I need 58''.

Dons72cheyennesuper · 06-13-2013, 09:51 PM

Is this a 1pc driveshaft?

Bhelton · 06-13-2013, 10:05 PM

Quote:

Originally Posted by Dons72cheyennesuper

Is this a 1pc driveshaft?

Yes
Posted via Mobile Device

grwnded71 · 06-15-2013, 08:23 PM

Am I missing something? My one piece driveshaft from my 70 swb 6cyl manual measures 54" from center of u-joint to center u-joint, I have recently dropped in a sb with a th400 from a 68. The driveshaft is the last piece I need in this combo but looks like I need a 58" or 60". I would be all over this but its pretty much the same length as the shaft I already have.

Trucksrme · 06-15-2013, 09:16 PM

Ilk take the window trim @ 70 shipped , pm me payment info and I will get it right to you
Posted via Mobile Device

Bhelton · 06-15-2013, 09:39 PM

Quote:

Originally Posted by grwnded71

Am I missing something? My one piece driveshaft from my 70 swb 6cyl manual measures 54" from center of u-joint to center u-joint, I have recently dropped in a sb with a th400 from a 68. The driveshaft is the last piece I need in this combo but looks like I need a 58" or 60". I would be all over this but its pretty much the same length as the shaft I already have.

This was for a sbc and a th400 long shaft, is yours a short or long th400

Quote:

Originally Posted by Trucksrme

Ilk take the window trim @ 70 shipped , pm me payment info and I will get it right to you
Posted via Mobile Device

Payment info sent via pm
Posted via Mobile Device

Trucksrme · 06-15-2013, 09:53 PM

Money sent . Pm sent. Thanks a lot Ben. Robert
Posted via Mobile Device

Bhelton · 06-15-2013, 10:37 PM

anytime!

grwnded71 · 06-15-2013, 10:56 PM

[QUOTE=Bhelton;6125288]This was for a sbc and a th400 long shaft, is yours a short or long th400

ahh ha....short tail shaft...sorry

**70STOVEBOLT** · 06-16-2013, 07:41 PM

So what length would it take for a swb with a 402 and short TH400?

Bhelton · 06-16-2013, 07:43 PM

Quote:

Originally Posted by 70STOVEBOLT

So what length would it take for a swb with a 402 and short TH400?

Depends on tranny if it long or short
Posted via Mobile Device

ecgate · 06-16-2013, 09:30 PM

Quote:

Originally Posted by 70STOVEBOLT

So what length would it take for a swb with a 402 and short TH400?

I would also like to know this

Bhelton · 06-16-2013, 09:53 PM

I'd like to think the 52" would be what you need if its a long th400
Posted via Mobile Device

06-12-2013, 08:58 PM	#1
Bhelton Registered User Join Date: May 2012 Location: Hickory NC Posts: 2,351	Driveshaft, window seals First is a drive shaft from a 67 that has been professionally cut and balanced to fit a swb, sbc th400 truck. Everything done by Carolina powertrain Asking $100 plus shipping Second is front and rear window rubbers for big back glass and both accept chrome trim new never installed $70 for both plus shipping Posted via Mobile Device

06-12-2013, 09:05 PM	#2
Undone Registered User Join Date: Aug 2010 Location: commerce ga Posts: 894	Re: Driveshaft, window seals What brand and year are window rubbers for?

06-12-2013, 09:08 PM	#3
Bhelton Registered User Join Date: May 2012 Location: Hickory NC Posts: 2,351	Re: Driveshaft, window seals Precision and 71-72 Posted via Mobile Device

06-12-2013, 09:19 PM	#4
ecgate Registered User Join Date: Aug 2012 Location: Council Bluffs, Iowa Posts: 280	Re: Driveshaft, window seals Can you get me the length of the drive shaft? Center of u-joint to center of u-joint will work.

06-12-2013, 09:21 PM	#5
Bhelton Registered User Join Date: May 2012 Location: Hickory NC Posts: 2,351	Re: Driveshaft, window seals Yes Posted via Mobile Device

06-12-2013, 09:24 PM	#6
Undone Registered User Join Date: Aug 2010 Location: commerce ga Posts: 894	Re: Driveshaft, window seals I would do 65.00 shipped for both window rubbers.

06-13-2013, 03:19 PM	#9
Bhelton Registered User Join Date: May 2012 Location: Hickory NC Posts: 2,351	Re: Driveshaft, window seals Up Posted via Mobile Device

06-13-2013, 09:51 PM	#13
Dons72cheyennesuper Registered User Join Date: Jul 2011 Location: Brookfield, Ohio Posts: 18	Re: Driveshaft, window seals Is this a 1pc driveshaft?

06-15-2013, 08:23 PM	#15
grwnded71 Registered User Join Date: Jul 2010 Location: Cedar Falls,IA Posts: 301	Re: Driveshaft, window seals Am I missing something? My one piece driveshaft from my 70 swb 6cyl manual measures 54" from center of u-joint to center u-joint, I have recently dropped in a sb with a th400 from a 68. The driveshaft is the last piece I need in this combo but looks like I need a 58" or 60". I would be all over this but its pretty much the same length as the shaft I already have. __________________ BRETT 70 C10 SWB,ECE 4.5/6 drop 68 C10 LWB Survivor DD 06 Harley-Davidson FLHT 71 Cheyenne Super LWB/sold

06-15-2013, 09:16 PM	#16
Trucksrme Registered User Join Date: May 2008 Location: Houston,Tx Posts: 120	Re: Driveshaft, window seals Ilk take the window trim @ 70 shipped , pm me payment info and I will get it right to you Posted via Mobile Device __________________ 72' cheyenne super swb (project)

06-15-2013, 09:53 PM	#18
Trucksrme Registered User Join Date: May 2008 Location: Houston,Tx Posts: 120	Re: Driveshaft, window seals Money sent . Pm sent. Thanks a lot Ben. Robert Posted via Mobile Device __________________ 72' cheyenne super swb (project)

06-15-2013, 10:37 PM	#19
Bhelton Registered User Join Date: May 2012 Location: Hickory NC Posts: 2,351	Re: Driveshaft, window seals anytime!

06-15-2013, 10:56 PM	#20
grwnded71 Registered User Join Date: Jul 2010 Location: Cedar Falls,IA Posts: 301	Re: Driveshaft, window seals [QUOTE=Bhelton;6125288]This was for a sbc and a th400 long shaft, is yours a short or long th400 ahh ha....short tail shaft...sorry __________________ BRETT 70 C10 SWB,ECE 4.5/6 drop 68 C10 LWB Survivor DD 06 Harley-Davidson FLHT 71 Cheyenne Super LWB/sold

06-16-2013, 07:41 PM	#21
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,265	Re: Driveshaft, window seals So what length would it take for a swb with a 402 and short TH400? __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

06-16-2013, 09:53 PM	#24
Bhelton Registered User Join Date: May 2012 Location: Hickory NC Posts: 2,351	Re: Driveshaft, window seals I'd like to think the 52" would be what you need if its a long th400 Posted via Mobile Device



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.