Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
06-29-2003, 03:32 PM | #1 |
5 day ban, learn to behave.
Join Date: Nov 2002
Location: san diego, ca
Posts: 683
|
Okay Im serious this time! Where and why to buy a 700r4
The time is now. Where and why should I buy my 700r4? I want a quality unit from someone with a good reputation.
who, where, how much, and why?? swervin I know you have a couple good sources. Lets hear em. What was that one in california? mike ps- its going to have to be somewhat of a custom trans, I need a short 27 spline output 4WD unit for my np205 transfer case. But Ill deal with that later. |
06-29-2003, 03:55 PM | #2 |
Registered User
Join Date: Sep 2002
Location: Liberty, Mississippi
Posts: 672
|
Thy Phoenix Transmissions in Weatherford, TX at http://www.phoenixtrans.com/html/Welcome.html
I've had one since 96 with no problems. Virgil |
06-29-2003, 04:48 PM | #3 |
yeller
Join Date: Oct 2001
Location: Twin Cities
Posts: 13,824
|
Mike, I got mine from here...
http://www.700r4.com/ They have the best customer service I have ever seen and their products are second to none. Visit their site, you will learn lots!!! ...Jeff |
06-29-2003, 09:45 PM | #4 |
Available for Adoption
Join Date: May 2003
Location: Lubbock Tx
Posts: 177
|
Yep, bigblock73 beat me to it, Bowtie Overdrives is where I'll buy my next tranny. They have a very good reputation with several folks over at Chevy Talk....
__________________
1983 C10 SWB 2001 Silverado SWB 1995 Corvette |
06-29-2003, 10:30 PM | #5 |
You get what you pay for
Join Date: Dec 1999
Location: Cherryville, NC
Posts: 4,798
|
The place I recommended was Pro-built automatics.
http://www.pro-built.net/ But it seems the site don't work anymore. I have no idea what happened. As far as Bowtie Overdrives, I'll never buy anything else from them. After they charged me $20.40 for a item that I could have bought from the Chevy dealer for $4.00, if I had known the part number, I won't buy anything else. But that's just me.
__________________
Mike 1985 Chevy C-10 Last edited by swervin ervin; 06-29-2003 at 10:41 PM. |
06-29-2003, 10:51 PM | #6 |
driving is in my blood
Join Date: Dec 1999
Location: Mesa AZ
Posts: 5,748
|
I got my 2004R from bowtie overdrives. Exellent tranny, great cutomer service until I didnt want to go threw all their required crap to get the warrenty. Now they wont even answer a simple email. Forget them
__________________
-78 c10 short/step: 388cid, M20, 5/5 drop, lots more. Playtoy and first vehicle. -98 c1500 x-cab: 5.7L, 17" rims, 5/6 drop, flowmaster, helper bags,NBS rear disk brakes. -02 Suburban 4x4: leveled front -CBR600F4i, CBR600RR, CBR1000RR, and standup skis DISCLAIMER: I cant spell for the life of me. |
06-29-2003, 11:09 PM | #7 |
Registered User
Join Date: Sep 2002
Location: Liberty, Mississippi
Posts: 672
|
Phoenix Transmissions
Well, I was wrong, about my trans. Right after I got it, something happened to the convertor. I called Greg, he had me do a few test, and call him back, which I did. He said he was having a problem with his convertor supplier at the time, and said he would make it 'right' (All this took place from about 5:30 pm to about 7pm, yes, he waited for me to call) I explained what he had me check and told him I would call back in the morning after I pulled the trans.
Well, while pulling the trans, FedEX shows up with a new convertor, a case of trans fluid, filter, etc funds to send the old convertor back etc. I haven't had a problem with it since then. Trans had less than 300 miles when convertor had problems. When he built it, it was NOT a 'generic' as he wanted to know engine combo, rear gears, tires, kind of vehicle, etc. If I ever need another, I WILL use him again. By the way, it is behind a 589hp 454, so I know it will stand up. Virgil Last edited by 44th Miss Inf; 06-30-2003 at 12:58 AM. |
06-29-2003, 11:29 PM | #8 | |
yeller
Join Date: Oct 2001
Location: Twin Cities
Posts: 13,824
|
Quote:
...Jeff |
|
06-30-2003, 12:12 AM | #9 |
5 day ban, learn to behave.
Join Date: Nov 2002
Location: san diego, ca
Posts: 683
|
Virgil, thanks for the info. I checked out their website, it looks promising. The prices are good too. I emailed greg, we'll see how it pans out..
as for bowtie overdrives, I will check them out too.... Ill keep everyone posted with my findings. mike |
06-30-2003, 12:27 AM | #10 |
5 day ban, learn to behave.
Join Date: Nov 2002
Location: san diego, ca
Posts: 683
|
Well I was browsing 700r4.com and it looks very promising too.. The level 2 sounds like a good trans, and plus they're local so I wouldnt have to pay shipping, I could go pick the tranny up.
I sent email to both sites, we'll see who wins Im stoked about the prices too, much lower than I expected.. But Ill probably end up paying more since its a 4x4 application.. mike |
06-30-2003, 01:40 AM | #11 |
Registered User
Join Date: Oct 2002
Location: Chanhassen, MN
Posts: 1,061
|
I got mine through Weber Transmissions. I had bid on an auction but didn't win and he e-mailed me offering me a tranny for $660.
I talked to him on the phone, really nice guy and easy to work with. Really down to earth. His prices were good too. He has 2 sites http://www.bowtietrans.com/ www.webertransmissions.com
__________________
ChevyChic 86 Chevy K-10 If I can't be a good example, then I'll just have to be a horrible warning. "You're braver than you believe, and stronger than you seem, and smarter than you think" - Christopher Robin |
06-30-2003, 06:22 PM | #12 |
I'm back with 2nd truck!
Join Date: Feb 2002
Location: Texas
Posts: 3,774
|
I would go with the local 700r4 guy you mentioned Mike. This way if anything happens while under warranty they can diagnose first hand while you're there watching them drive the truck if need be. Plus no shipping!!! More truck funds!!!
__________________
1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson |
06-30-2003, 06:47 PM | #13 |
Registered User
Join Date: Oct 2002
Location: Phoenix, Arizona
Posts: 4,703
|
I agree going with someone local if possible is a good idea. Dealing with people across state lines can become a major hassle and very frustrating.
__________________
* AVOID: LOPER'S PERMORANCE / LOPERSPEED.COM OF PHOENIX, AZ & COTTMAN TRANSMISSION * |
06-30-2003, 06:53 PM | #14 |
You get what you pay for
Join Date: Dec 1999
Location: Cherryville, NC
Posts: 4,798
|
__________________
Mike 1985 Chevy C-10 |
06-30-2003, 07:45 PM | #15 | |
driving is in my blood
Join Date: Dec 1999
Location: Mesa AZ
Posts: 5,748
|
Quote:
But they didnt have to stop answering my questions just because I didn't want the warrenty!!!!!!!
__________________
-78 c10 short/step: 388cid, M20, 5/5 drop, lots more. Playtoy and first vehicle. -98 c1500 x-cab: 5.7L, 17" rims, 5/6 drop, flowmaster, helper bags,NBS rear disk brakes. -02 Suburban 4x4: leveled front -CBR600F4i, CBR600RR, CBR1000RR, and standup skis DISCLAIMER: I cant spell for the life of me. |
|
06-30-2003, 10:39 PM | #16 |
5 day ban, learn to behave.
Join Date: Nov 2002
Location: san diego, ca
Posts: 683
|
I got a really really good reply from bowtie overdrives... Its a little further than I thought (my mom says 3hrs) but its the same area code (760) so... no big deal, i was assuming it was a little closer though.
I think Ill probably go with them. more later mike |
06-30-2003, 10:54 PM | #17 |
Watch out for your cornhole !
Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
|
Pheonix...
I have several Pheonix transmissions. They cannot be beat!
Pheonix is in my town, coincidentally, and I've been all through their shop. I know the guys there and you can trust them. Converter problems are not an issue at Pheonix. They bought out a converter company and now do all converter building in house. They can build you any 700 converter you desire. They also have a dyno that all of their out of state trans get run on, to make sure everything is well, and to avoid any hard feelings due to shipping a bad tranny. |
06-30-2003, 11:33 PM | #18 |
Registered User
Join Date: Sep 2002
Location: Liberty, Mississippi
Posts: 672
|
TX Firefighter,
Glad to hear that they have their own convertors now. I have had great service with mine, and will buy from them again. Greg bent over backwards helping me, and and I appreciate all the time and patience he gave me by answering my questions. Mike, Good luck with whoever you use, and keep us posted Virgil Last edited by 44th Miss Inf; 06-30-2003 at 11:35 PM. |
07-02-2003, 02:47 PM | #19 |
Registered User
Join Date: May 2000
Location: Torrance, Calif.
Posts: 36
|
I bought my 700 R4 from Boe Tie for my 73. When I finally got everything up and running the trans worked for about a month. I pulled the pan down and parts of 3 bolts were laying in the pan. Boe tie would not do anything they said it was over a year. I had Hero's a local transmission shop in Gardena, Ca go thru it and fix it. No problems for 2 years.
__________________
67 long bed step side/future fuel injected 502 73 Cheyenne super20/ fuel injected 454 |
07-02-2003, 04:36 PM | #20 |
BAD BOW-Silverado XST
Join Date: May 2000
Location: Senior Member from Austin, TX
Posts: 6,431
|
Bowtie overdrive trannys may be built very good but each increases in price. A local rebuilder built my 700R4 with some of the parts of the highest level and still costs less. A local guy should take all the best parts available to build you one that will last for years no matter what kind of abuse you put to it. I would choose a reputable local builder.
|
Bookmarks |
|
|