AZ parting 72 blazer - The 1947 - Present Chevrolet & GMC Truck Message Board Network

oilyrag80 · 07-09-2013, 09:13 PM

picked up this blazer and decided to part it out its rusted really bad
so most of the sheet metal is no good but still some good
just let me know what u need Thanks,James

gas filler tube $90 shipped
front bumper brackets(4) $65 shipped
rear brackets (2) $60 shipped
nice driver grill $150 plus shipping
swp power steering pump and brackets $60 plus shipping
This truck has tow hooks but not sure if they are factory any info on them
would be appreciated.
Everthing is for sale so just ask. Also can cut patch panels.

oilyrag80 · 07-09-2013, 09:19 PM

Few more pics

swyfor5 · 07-09-2013, 09:33 PM

I would be interested in both rear quarter/tailight area patch panels. Mainly need the tailight area, but could use both patch panels a little farther forward, like just past the marker lights. Let me know if that's possible, and a price shipped to 49665. Thank's, Bryan.

turp mcspray · 07-09-2013, 09:48 PM

How is the rear bumper? Does it look like it could be straightened and rechromed? Actually, how about both bumpers.

bluek5 · 07-09-2013, 09:55 PM

How's the gas tank, rear view mirrors?
Thanks, Paul

**71blksuper4x4** · 07-09-2013, 10:00 PM

Interested in a couple things.....both 4x4 shifter and 4 speed shifter, the rear tail pan under the bed with the two humps in it for the frame horns. Trevor
Posted via Mobile Device

**71blksuper4x4** · 07-09-2013, 10:02 PM

Can you also take a picture of the front and rear end covers please. Looking for finned aluminum covers. Trevor
Posted via Mobile Device

VA72C10 · 07-09-2013, 10:04 PM

Interested in the power steering if you can include the lines including the low pressure return fitting on the gearbox. Mainly to match up new ones and use the low pressure fitting. Thanks. Price shipped to 23112?

**paul mora** · 07-09-2013, 10:06 PM

I would like to buy the tow hooks how much
Posted via Mobile Device

tdkosta · 07-09-2013, 10:08 PM

How much for the K/5 Blazer emblems?

**29od1** · 07-09-2013, 10:09 PM

I'll take the under floor bracing for the bucket seats if you'll cut it all out. The z-shaped metal piece that runs from side to side under the front seat mounts. And also the rear mount braces under the floor.
Thanks,
David
Posted via Mobile Device

oilyrag80 · 07-09-2013, 10:10 PM

Quote:

Originally Posted by bluek5

How's the gas tank, rear view mirrors?
Thanks, Paul

sorry no gas tank and the mirrors are nice but they dont match.

tdkosta · 07-09-2013, 10:12 PM

Also interested in the windshield, trim, and gasket if the windshield is good. And any of the screws that hold the visors to the windshield frame and screws that hold the top brackets to the windshield.

**cst204x4** · 07-09-2013, 10:16 PM

2nd in line on tow hooks

oilyrag80 · 07-09-2013, 10:20 PM

Quote:

Originally Posted by turp mcspray

How is the rear bumper? Does it look like it could be straightened and rechromed? Actually, how about both bumpers.

both bumpers are in nice shape just a few dings. 2 Front bumper bolt holes arent perfertly square they had the wrong bolts. Id ask 75 each plus shipping

oilyrag80 · 07-09-2013, 10:22 PM

bumper pics

oilyrag80 · 07-09-2013, 10:30 PM

Quote:

Originally Posted by VA72C10

Interested in the power steering if you can include the lines including the low pressure return fitting on the gearbox. Mainly to match up new ones and use the low pressure fitting. Thanks. Price shipped to 23112?

Yes I will include all lines and hoses shipping is 35 so 95 shipped
Thanks
I can use a flat rate box so shipping is 16 bucks total 76 shipped

oilyrag80 · 07-09-2013, 10:36 PM

Quote:

Originally Posted by 71blksuper4x4

Interested in a couple things.....both 4x4 shifter and 4 speed shifter, the rear tail pan under the bed with the two humps in it for the frame horns. Trevor
Posted via Mobile Device

Quote:

Originally Posted by 71blksuper4x4

Can you also take a picture of the front and rear end covers please. Looking for finned aluminum covers. Trevor
Posted via Mobile Device

do you need all the likage,shifter,boots,knobs?
does that pan unbolt or does it need to be cut out
the front cove looks like a finned aluminum but rear is stock
let me know and ill get u a price Thanks

tdkosta · 07-09-2013, 10:41 PM

Oh and 3rd in line for the tow hooks if they make it that far.

oilyrag80 · 07-09-2013, 10:43 PM

Quote:

Originally Posted by tdkosta

How much for the K/5 Blazer emblems?

Quote:

Originally Posted by tdkosta

Also interested in the windshield, trim, and gasket if the windshield is good. And any of the screws that hold the visors to the windshield frame and screws that hold the top brackets to the windshield.

Emblems $30
Ive never been able to get a windshield out without cutting the gasket
so not sure I can price that, but I do have all the screws if I can get them out $10

**71blksuper4x4** · 07-09-2013, 10:46 PM

The center hump will unbolt around the floor. Only need the shifter arms themselves. No knobs or boots. I will take the front cover and that funky looking axle truss too under the front with its mounting brackets.
Posted via Mobile Device

oilyrag80 · 07-09-2013, 10:49 PM

Quote:

Originally Posted by paul mora

I would like to buy the tow hooks how much
Posted via Mobile Device

Quote:

Originally Posted by cst204x4

2nd in line on tow hooks

Quote:

Originally Posted by tdkosta

Oh and 3rd in line for the tow hooks if they make it that far.

I was hoping for a little info on these before I quote a price because
I know there are different ones and they all vary on price.
As soon as I find out value Ill sell them for a great deal!
Thanks James

tdkosta · 07-09-2013, 10:51 PM

Quote:

Originally Posted by oilyrag80

Emblems $30
Ive never been able to get a windshield out without cutting the gasket
so not sure I can price that, but I do have all the screws if I can get them out $10

Sounds good, for now I'll take the emblems for $30 and the screws for $10. Let me know if you have any luck with the windshield. I have a brother in law in Sierra Vista that might be able to pick the windshield up. Mine is cracked already, so I can save my gasket by breaking out the window if necessary.

**too much stuff** · 07-09-2013, 10:53 PM

Quote:

Originally Posted by oilyrag80

I was hoping for a little info on these before I quote a price because
I know there are different ones and they all vary on price.
As soon as I find out value Ill sell them for a great deal!
Thanks James

Those are not the correct sought after tow hooks. I have seen that style sell for $20-$40/pair.

71swb4x4 · 07-09-2013, 10:58 PM

Quote:

Originally Posted by too much stuff

Those are not the correct sought after tow hooks. I have seen that style sell for $20-$40/pair.

I agree with what Eric posted.

07-09-2013, 09:13 PM	#1
oilyrag80 Registered User Join Date: Jul 2006 Location: Tucson Az Posts: 1,695	parting 72 blazer picked up this blazer and decided to part it out its rusted really bad so most of the sheet metal is no good but still some good just let me know what u need Thanks,James gas filler tube $90 shipped front bumper brackets(4) $65 shipped rear brackets (2) $60 shipped nice driver grill $150 plus shipping swp power steering pump and brackets $60 plus shipping This truck has tow hooks but not sure if they are factory any info on them would be appreciated. Everthing is for sale so just ask. Also can cut patch panels. Attached Images

07-09-2013, 09:19 PM	#2
oilyrag80 Registered User Join Date: Jul 2006 Location: Tucson Az Posts: 1,695	Re: parting 72 blazer Few more pics Attached Images

07-09-2013, 09:33 PM	#3
swyfor5 Registered User Join Date: May 2007 Location: Marion, Mi. Posts: 2,429	Re: parting 72 blazer I would be interested in both rear quarter/tailight area patch panels. Mainly need the tailight area, but could use both patch panels a little farther forward, like just past the marker lights. Let me know if that's possible, and a price shipped to 49665. Thank's, Bryan.

07-09-2013, 09:48 PM	#4
turp mcspray Registered User Join Date: May 2007 Location: Rapid City South Dakota Posts: 2,359	Re: parting 72 blazer How is the rear bumper? Does it look like it could be straightened and rechromed? Actually, how about both bumpers. __________________ Turp Mcspray New life for an old 2wd, farm blazer http://67-72chevytrucks.com/vboard/s...d.php?t=505987 My Blazer build http://67-72chevytrucks.com/vboard/s...d.php?t=342299

07-09-2013, 09:55 PM	#5
bluek5 Registered User Join Date: Apr 2012 Location: Lehi,Utah Posts: 1,330	Re: parting 72 blazer How's the gas tank, rear view mirrors? Thanks, Paul

07-09-2013, 10:00 PM	#6
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: parting 72 blazer Interested in a couple things.....both 4x4 shifter and 4 speed shifter, the rear tail pan under the bed with the two humps in it for the frame horns. Trevor Posted via Mobile Device __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

07-09-2013, 10:02 PM	#7
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: parting 72 blazer Can you also take a picture of the front and rear end covers please. Looking for finned aluminum covers. Trevor Posted via Mobile Device __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

07-09-2013, 10:04 PM	#8
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: parting 72 blazer Interested in the power steering if you can include the lines including the low pressure return fitting on the gearbox. Mainly to match up new ones and use the low pressure fitting. Thanks. Price shipped to 23112? __________________ Looking for a 67-72 swb or blazer project in or around VA.

07-09-2013, 10:06 PM	#9
paul mora Senior Member Join Date: Jan 2009 Location: huntington beach california Posts: 976	Re: parting 72 blazer I would like to buy the tow hooks how much Posted via Mobile Device __________________ Pulatoy

07-09-2013, 10:08 PM	#10
tdkosta Registered User Join Date: Jan 2007 Location: Mesa, AZ Posts: 781	Re: parting 72 blazer How much for the K/5 Blazer emblems?

07-09-2013, 10:09 PM	#11
29od1 Registered User Join Date: Oct 2006 Location: Wichita, Kansas Posts: 1,050	Re: parting 72 blazer I'll take the under floor bracing for the bucket seats if you'll cut it all out. The z-shaped metal piece that runs from side to side under the front seat mounts. And also the rear mount braces under the floor. Thanks, David Posted via Mobile Device

07-09-2013, 10:12 PM	#13
tdkosta Registered User Join Date: Jan 2007 Location: Mesa, AZ Posts: 781	Re: parting 72 blazer Also interested in the windshield, trim, and gasket if the windshield is good. And any of the screws that hold the visors to the windshield frame and screws that hold the top brackets to the windshield.

07-09-2013, 10:16 PM	#14
cst204x4 Senior Member Join Date: Jan 2012 Location: corunna michigan Posts: 2,006	Re: parting 72 blazer 2nd in line on tow hooks __________________ 1970 CST 4x4 collecting nos parts for this project 1972 cutlass owned since 1984 1972 cutlass conv 1970 Cutlass conv 1981 chevy shortbox 1986 grand national 2004 2500HD Crew Cab 66,000 miles

07-09-2013, 10:22 PM	#16
oilyrag80 Registered User Join Date: Jul 2006 Location: Tucson Az Posts: 1,695	Re: parting 72 blazer bumper pics Attached Images

07-09-2013, 10:41 PM	#19
tdkosta Registered User Join Date: Jan 2007 Location: Mesa, AZ Posts: 781	Re: parting 72 blazer Oh and 3rd in line for the tow hooks if they make it that far.



Register or Log In To remove these advertisements.

07-09-2013, 10:46 PM	#21
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: parting 72 blazer The center hump will unbolt around the floor. Only need the shifter arms themselves. No knobs or boots. I will take the front cover and that funky looking axle truss too under the front with its mounting brackets. Posted via Mobile Device __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

Register or Log In To remove these advertisements.