WTB-Parking Brake Parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Cal69Chevy · 07-01-2003, 10:11 AM

i've got a '69 chevy longbed(98" bed) 4x4. It's got a 14 bolt rear end. I need the intermediate cable and cable hangers/runners for the parking brake. If you have these lying around and don't need them let me know what you take for the set. If you don't have the whole set up but have the cable hangers/runners that would be a huge help too. If you have nothing but have some information on what trucks (years/models) would be good donors for these that would also be a huge help.

Thanks in advance....

Ken

knucklebuster · 07-01-2003, 12:31 PM

I just took apart a long bed and should have all the brake parts.I'll look to see.

**jerry moss** · 07-01-2003, 08:38 PM

if you're using a 73 up 14 bolt rear you'll need to have new cables built, the ones on the 14 bolt are too short. i had mine done in reno nevada at nevada speedometer but i'm sure there are shops closer to you that can build them for you. i sent my old cables to them so they would have the correct ends and a week or so later they were back.

nejeff · 07-01-2003, 10:05 PM

I am currently swapping rears and have all the cables but the short ones that go into the rearend. ( I am not very mechanical but I think those are the one you dont need) They are off a 72 Long bed. EMail me at nejeff@juno.com

Cal69Chevy · 07-02-2003, 12:15 AM

any chance of getting any pictures of your setup? I've only looked at 2wd version of this truck and it seems like the transfer case on my truck is going to get in the way of the intermediate cable crossing over to the passenger side of the frame. I went to the bone yard today and wasn't able to find a 69-72 4x4 but did find a 79 4x4 and took all of that with me but the frame was different and so i'm not at all confident it will work.

Any ideas?

BTW, I was able to get two black visors, and arm rests in EXCELLENT condition...those along with all the parking brake parts...cost me $20. Not a bad day at the bone yard.

Cal69Chevy · 07-02-2003, 12:19 AM

Jerry...one of the problems I'm having is the cable from the cab pedal isn't long enough to reach the frame mount. I find that very odd...I bought the truck the way it currently is and I was told the frame was off of a '69 4wd but the cab came from a 2wd...so, i'm assuming the cable is for a 2wd frame and hence the problem.

How did they they know how long to make everything jerry?

07-01-2003, 10:11 AM	#1
Cal69Chevy Registered User Join Date: Nov 2001 Location: SoCal Posts: 136	WTB-Parking Brake Parts i've got a '69 chevy longbed(98" bed) 4x4. It's got a 14 bolt rear end. I need the intermediate cable and cable hangers/runners for the parking brake. If you have these lying around and don't need them let me know what you take for the set. If you don't have the whole set up but have the cable hangers/runners that would be a huge help too. If you have nothing but have some information on what trucks (years/models) would be good donors for these that would also be a huge help. Thanks in advance.... Ken __________________ '69 Chevy, 4X4-SB 350 TBI-TH350 Trans-205 Transfer Case-Dana 44 Front-14 Bolt Rear-Front Disc Brakes-Factory A/C-P/S Ken's '69 Page

07-01-2003, 12:31 PM	#2
knucklebuster Failure is NOT an option! Join Date: Feb 2003 Location: greenwood s.c. Posts: 811	I just took apart a long bed and should have all the brake parts.I'll look to see. __________________ House payment or truck parts?????.........why does life have to be so complicated? 1969 Chevy Shortbed Fleetside 1969 Camaro ps pb a/c(drove in high school now it's just a yard ornament,but it's next on the list for resto) 1990 Ni$$an hardbody( daily beater that has been really beaten!) 1999 Grand Am GT(wifes ride...never buy a pontiac!!Trust Me)

07-01-2003, 08:38 PM	#3
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,936	if you're using a 73 up 14 bolt rear you'll need to have new cables built, the ones on the 14 bolt are too short. i had mine done in reno nevada at nevada speedometer but i'm sure there are shops closer to you that can build them for you. i sent my old cables to them so they would have the correct ends and a week or so later they were back. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

07-01-2003, 10:05 PM	#4
nejeff Registered User Join Date: Jun 2003 Location: Nebraska Posts: 63	I am currently swapping rears and have all the cables but the short ones that go into the rearend. ( I am not very mechanical but I think those are the one you dont need) They are off a 72 Long bed. EMail me at nejeff@juno.com __________________ 72' Chevy Super Cheyenne LWB 72' Chevy C-10 (307 Parts Truck)

07-02-2003, 12:15 AM	#5
Cal69Chevy Registered User Join Date: Nov 2001 Location: SoCal Posts: 136	any chance of getting any pictures of your setup? I've only looked at 2wd version of this truck and it seems like the transfer case on my truck is going to get in the way of the intermediate cable crossing over to the passenger side of the frame. I went to the bone yard today and wasn't able to find a 69-72 4x4 but did find a 79 4x4 and took all of that with me but the frame was different and so i'm not at all confident it will work. Any ideas? BTW, I was able to get two black visors, and arm rests in EXCELLENT condition...those along with all the parking brake parts...cost me $20. Not a bad day at the bone yard. __________________ '69 Chevy, 4X4-SB 350 TBI-TH350 Trans-205 Transfer Case-Dana 44 Front-14 Bolt Rear-Front Disc Brakes-Factory A/C-P/S Ken's '69 Page

07-02-2003, 12:19 AM	#6
Cal69Chevy Registered User Join Date: Nov 2001 Location: SoCal Posts: 136	Jerry...one of the problems I'm having is the cable from the cab pedal isn't long enough to reach the frame mount. I find that very odd...I bought the truck the way it currently is and I was told the frame was off of a '69 4wd but the cab came from a 2wd...so, i'm assuming the cable is for a 2wd frame and hence the problem. How did they they know how long to make everything jerry? __________________ '69 Chevy, 4X4-SB 350 TBI-TH350 Trans-205 Transfer Case-Dana 44 Front-14 Bolt Rear-Front Disc Brakes-Factory A/C-P/S Ken's '69 Page



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.