MS 67 c10 engine, trans, and front steering parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chasinhiway · 07-15-2013, 05:34 PM

I have for sale the stock 6 cylinder and 3speed trans complete that came out of my truck for sale. The motor had low compression but as with all engines was running when "parked". I also have the entire steering and brake set up for the front end. Steering box to spindles. I have no idea what this stuff is worth but thought someone could use it and its just collecting dust in my shop. I'd like to get $500 for all of it but if someone needs it I will consider any serious offers. text me at 662-296-0200 with questions. Thank you.

Sizemore 65 · 07-15-2013, 11:19 PM

I might be interested in the carburetor and intake if you sell separate.

Thanks
Aaron

chasinhiway · 07-16-2013, 11:07 AM

pm sent

**70STOVEBOLT** · 07-16-2013, 02:48 PM

Would you sell the air cleaner separately? Also, do you have lifting brackets and a dipstick for the engine? If so, how much, shipped to 46562?

Thanks,
Mark

chasinhiway · 07-16-2013, 03:25 PM

Quote:

Originally Posted by 70STOVEBOLT

Would you sell the air cleaner separately? Also, do you have lifting brackets and a dipstick for the engine? If so, how much, shipped to 46562?

Thanks,
Mark

What lifting brackets are you refering to? If it had them from the factory I should have them.

**70STOVEBOLT** · 07-16-2013, 03:36 PM

They bolt on the top of the head, have a big hole in the center, one at the front of the head on the right side and one at the rear of the head on the left side. May not have had them in 67?

chasinhiway · 07-16-2013, 05:03 PM

Quote:

Originally Posted by 70STOVEBOLT

They bolt on the top of the head, have a big hole in the center, one at the front of the head on the right side and one at the rear of the head on the left side. May not have had them in 67?

Mine did not have them. For the complete air cleaner with the brackets and the dipstick I'll do $120.00 shipped to you

**70STOVEBOLT** · 07-16-2013, 08:04 PM

I will pass thanks anyway
Posted via Mobile Device

junkcarguy · 07-21-2013, 11:31 AM

I need all the three speed column shift linkage and plates off the trans if you want to sell it

chasinhiway · 07-22-2013, 04:26 PM

I'll look tonight and see what all I have. I know the steering column is already gone. but the linkage from the column to the trans I'm pretty sure are still there.

A.Bursell · 07-22-2013, 10:55 PM

How about the "clutch linkage pivot ball bracket assembly" that bolts to the engine?
Posted via Mobile Device

**70cst** · 07-22-2013, 10:56 PM

Quote:

Originally Posted by chasinhiway

pm sent

Lets keeps all transactions in the open. Thanks

chasinhiway · 07-23-2013, 08:42 AM

Sorry didnt realize I was breaking the rules. I sold Sizemore 65 the carb for $25 including shipping.

I have the linkage from the steering column to the trans and the arms on the trans. I'm thinking $20 plus shipping

I have the pivot bracket and z bar also I'll do $25 plus shipping.

I'm cleaning out the shop if someone is in my area I'll make them a good deal on a bunch of parts, If they'll take all of them.

496bb · 07-23-2013, 09:25 AM

Numbers from the engine? Might be interested in it and the bell for a swap into a 49 car to replace my 216.

chasinhiway · 07-23-2013, 09:58 AM

What numbers would you like? I can also take pics of any part you'd like
Posted via Mobile Device

68 IRON · 07-23-2013, 02:29 PM

I'll get in line for the z-bar, pivot ball, clutch linkage combo.....I'll take it otherwise. Let me know.

A.Bursell · 07-24-2013, 12:44 AM

Quote:

Originally Posted by chasinhiway

I have the pivot bracket and z bar also I'll do $25 plus shipping.

I'll take the setup, please PM me with how to pay you.

Adam
Posted via Mobile Device

chasinhiway · 07-25-2013, 12:48 PM

Clutch linkage is sold pending payment
Posted via Mobile Device

68 IRON · 08-18-2013, 11:08 AM

Forgot to follow up on this....z-bar and associated linkage sell?

A.Bursell · 08-19-2013, 11:13 AM

Quote:

Originally Posted by 68 IRON

Forgot to follow up on this....z-bar and associated linkage sell?

I did buy it.

Adam

68 IRON · 08-20-2013, 02:51 PM

Gotcha!

07-15-2013, 05:34 PM	#1
chasinhiway Registered User Join Date: Apr 2010 Location: pontotoc, ms Posts: 113	67 c10 engine, trans, and front steering parts I have for sale the stock 6 cylinder and 3speed trans complete that came out of my truck for sale. The motor had low compression but as with all engines was running when "parked". I also have the entire steering and brake set up for the front end. Steering box to spindles. I have no idea what this stuff is worth but thought someone could use it and its just collecting dust in my shop. I'd like to get $500 for all of it but if someone needs it I will consider any serious offers. text me at 662-296-0200 with questions. Thank you. Attached Images Last edited by chasinhiway; 07-15-2013 at 05:35 PM. Reason: forgot my number

07-15-2013, 11:19 PM	#2
Sizemore 65 Registered User Join Date: Apr 2010 Location: Johnson City TN Posts: 65	Re: 67 c10 engine, trans, and front steering parts I might be interested in the carburetor and intake if you sell separate. Thanks Aaron

07-16-2013, 11:07 AM	#3
chasinhiway Registered User Join Date: Apr 2010 Location: pontotoc, ms Posts: 113	Re: 67 c10 engine, trans, and front steering parts pm sent

07-16-2013, 02:48 PM	#4
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,266	Re: 67 c10 engine, trans, and front steering parts Would you sell the air cleaner separately? Also, do you have lifting brackets and a dipstick for the engine? If so, how much, shipped to 46562? Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

07-16-2013, 03:36 PM	#6
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,266	Re: 67 c10 engine, trans, and front steering parts They bolt on the top of the head, have a big hole in the center, one at the front of the head on the right side and one at the rear of the head on the left side. May not have had them in 67? __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

07-16-2013, 08:04 PM	#8
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,266	Re: 67 c10 engine, trans, and front steering parts I will pass thanks anyway Posted via Mobile Device __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

07-21-2013, 11:31 AM	#9
junkcarguy Registered User Join Date: Sep 2011 Location: colorado springs colorado Posts: 49	Re: 67 c10 engine, trans, and front steering parts I need all the three speed column shift linkage and plates off the trans if you want to sell it

07-22-2013, 04:26 PM	#10
chasinhiway Registered User Join Date: Apr 2010 Location: pontotoc, ms Posts: 113	Re: 67 c10 engine, trans, and front steering parts I'll look tonight and see what all I have. I know the steering column is already gone. but the linkage from the column to the trans I'm pretty sure are still there.

07-22-2013, 10:55 PM	#11
A.Bursell Registered User Join Date: Jul 2012 Location: Marysville, WA Posts: 294	Re: 67 c10 engine, trans, and front steering parts How about the "clutch linkage pivot ball bracket assembly" that bolts to the engine? Posted via Mobile Device

07-23-2013, 08:42 AM	#13
chasinhiway Registered User Join Date: Apr 2010 Location: pontotoc, ms Posts: 113	Re: 67 c10 engine, trans, and front steering parts Sorry didnt realize I was breaking the rules. I sold Sizemore 65 the carb for $25 including shipping. I have the linkage from the steering column to the trans and the arms on the trans. I'm thinking $20 plus shipping I have the pivot bracket and z bar also I'll do $25 plus shipping. I'm cleaning out the shop if someone is in my area I'll make them a good deal on a bunch of parts, If they'll take all of them.

07-23-2013, 09:25 AM	#14
496bb Registered User Join Date: Jan 2012 Location: Birmingham AL Posts: 283	Re: 67 c10 engine, trans, and front steering parts Numbers from the engine? Might be interested in it and the bell for a swap into a 49 car to replace my 216. __________________ 87 3/4 Burb 454 49 Chev Fleetline Deluxe

07-23-2013, 09:58 AM	#15
chasinhiway Registered User Join Date: Apr 2010 Location: pontotoc, ms Posts: 113	Re: 67 c10 engine, trans, and front steering parts What numbers would you like? I can also take pics of any part you'd like Posted via Mobile Device

07-23-2013, 02:29 PM	#16
68 IRON Registered User Join Date: Sep 2010 Location: Olympia, WA Posts: 736	Re: 67 c10 engine, trans, and front steering parts I'll get in line for the z-bar, pivot ball, clutch linkage combo.....I'll take it otherwise. Let me know.

07-25-2013, 12:48 PM	#18
chasinhiway Registered User Join Date: Apr 2010 Location: pontotoc, ms Posts: 113	Re: 67 c10 engine, trans, and front steering parts Clutch linkage is sold pending payment Posted via Mobile Device

08-18-2013, 11:08 AM	#19
68 IRON Registered User Join Date: Sep 2010 Location: Olympia, WA Posts: 736	Re: 67 c10 engine, trans, and front steering parts Forgot to follow up on this....z-bar and associated linkage sell?



Register or Log In To remove these advertisements.

08-20-2013, 02:51 PM	#21
68 IRON Registered User Join Date: Sep 2010 Location: Olympia, WA Posts: 736	Re: 67 c10 engine, trans, and front steering parts Gotcha!

Register or Log In To remove these advertisements.