CA Bench seat part out! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

budnikguy · 07-30-2013, 01:45 AM

Other member here needed a few of the zig zag seat springs..have a few more of those available, the mounting brackets/sliders, and or the entire frame..
$3 es for zig zag springs + shipping
$25 for the mounting brackets/sliders +shipping

anything else you ma need lmk here in the post.

Thanks
Adam

68basket · 11-10-2013, 10:08 PM

thanks for he response in my thread. I am very interested but cant see any of your pictures. You can email to me if you wish. taylor_inge@hotmail

Thankyou

swamp rat · 12-11-2013, 05:27 AM

Budnikguy,

Will you separate a track adjustment locking pin, coil spring, and retainer clip from the passenger seat track?

Also interested in the long spring in the bottom picture.

**D.PASSMORE** · 12-11-2013, 07:38 AM

I'll take three springs.

**jabborabbo** · 12-11-2013, 08:48 AM

If you separate the passenger side stuff for swamp rat I'd be interested in the driver's side lever, locking piece and spring depending on condition/wear....

ebustos · 12-11-2013, 02:41 PM

Just wondering about that gas pedal assembly. Let me know.

**Gary 70 Jimmy** · 12-13-2013, 01:41 PM

I will take the rest of the zig zag springs and the other spring for the sliders. I am going to put them under my buckets for more support.

budnikguy · 12-13-2013, 05:39 PM

Let me confirm everything that is left, and may have another seat to part out...I will confirm and notify everyone in the order that was requested...ty

Adam

swamp rat · 12-13-2013, 05:42 PM

Thanks!

**Gary 70 Jimmy** · 12-15-2013, 05:57 PM

Looks like I well need 8 zig zag springs I all so need the locking piece and spring on passenger side.

budnikguy · 12-19-2013, 03:28 PM

I have all the pieces everyone needs...I will get them all laid out and pics taken open Saturday! Thanks for your patience

swamp rat · 01-03-2014, 01:33 PM

Bump, any progress?

budnikguy · 01-03-2014, 03:55 PM

I have everything all put aside...I will get it laid out and pics taken for everybody tomorrow...

**Gary 70 Jimmy** · 01-03-2014, 06:09 PM

I found some zig zag springs just need the piece with the small spring for the seat adjuster and the rod.

swamp rat · 01-03-2014, 06:32 PM

Quote:

Originally Posted by Gary 70 Jimmy

I found some zig zag springs just need the piece with the small spring for the seat adjuster and the rod.

No offence there guy but I already asked for the same pieces for the seat track..

**Gary 70 Jimmy** · 01-03-2014, 08:14 PM

Quote:

Originally Posted by swamp rat

No offence there guy but I already asked for the same pieces for the seat track..

No offense taken I no you were first in line.

allons · 01-03-2014, 08:17 PM

Do you still have the adjustment rod that runs between the 2 seat mounting brackets?

budnikguy · 01-07-2014, 02:01 AM

everything posted in previous pics is available..and another entire seat is disassembled and available...here are pics. Please keep in mind your order of interest.

swamp rat · 01-07-2014, 04:46 AM

I need these seat track adjuster parts out of the passenger seat track if you will separate. Price?

Also the long coil spring that helps the seat move forward. Price?
Also i need the long wire that runs between the seat tracks. Price?

**Gary 70 Jimmy** · 01-07-2014, 09:46 AM

Quote:

Originally Posted by swamp rat

I need these seat track adjuster parts out of the passenger seat track if you will separate. Price?

Also the long coil spring that helps the seat move forward. Price?
Also i need the long wire that runs between the seat tracks. Price?

I need all the same parts. dont no how is first in line.

budnikguy · 01-16-2014, 01:09 PM

You would be first up based upon initital requests....$46 delivered for all parts mentioned here.

Quote:

Originally Posted by swamp rat

I need these seat track adjuster parts out of the passenger seat track if you will separate. Price?

Also the long coil spring that helps the seat move forward. Price?
Also i need the long wire that runs between the seat tracks. Price?

swamp rat · 01-16-2014, 03:00 PM

Paypal?

budnikguy · 01-16-2014, 03:33 PM

Yes sir, I will PM you

Quote:

Originally Posted by swamp rat

Paypal?

**jocko** · 01-16-2014, 03:57 PM

budnik - I know you haven't mentioned or pictured any - but in your seat disassembly, did you happen to save any of the thin metal rods that are inserted into the seat covers that are used for hog ring attachment points? If so, I'm interested in them. Thanks! I think there are usually 4 of them total (?) (3 different sizes?) per seat cover.

swamp rat · 01-28-2014, 03:05 PM

Budnikguy, have tried to PM you but your box is full, could you please clear it out and send me an update? Thanks!

07-30-2013, 01:45 AM	#1
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Bench seat part out! Other member here needed a few of the zig zag seat springs..have a few more of those available, the mounting brackets/sliders, and or the entire frame.. $3 es for zig zag springs + shipping $25 for the mounting brackets/sliders +shipping anything else you ma need lmk here in the post. Thanks Adam Last edited by budnikguy; 11-14-2013 at 11:18 AM.

11-10-2013, 10:08 PM	#2
68basket Registered User Join Date: Dec 2012 Location: louisville, ky Posts: 480	Re: Bench seat part out! thanks for he response in my thread. I am very interested but cant see any of your pictures. You can email to me if you wish. taylor_inge@hotmail Thankyou

12-11-2013, 05:27 AM	#3
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: Bench seat part out! Budnikguy, Will you separate a track adjustment locking pin, coil spring, and retainer clip from the passenger seat track? Also interested in the long spring in the bottom picture. __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

12-11-2013, 07:38 AM	#4
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,054	Re: Bench seat part out! I'll take three springs. __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

12-11-2013, 08:48 AM	#5
jabborabbo Senior Member Join Date: Apr 2013 Location: Podunk, Texas Posts: 750	Re: Bench seat part out! If you separate the passenger side stuff for swamp rat I'd be interested in the driver's side lever, locking piece and spring depending on condition/wear....

12-11-2013, 02:41 PM	#6
ebustos Registered User Join Date: Jul 2011 Location: Bakersfield, California Posts: 109	Re: Bench seat part out! Just wondering about that gas pedal assembly. Let me know.

12-13-2013, 01:41 PM	#7
Gary 70 Jimmy Senior Member Join Date: Jan 2002 Location: Burghill, Ohio 44404 Posts: 3,402	Re: Bench seat part out! I will take the rest of the zig zag springs and the other spring for the sliders. I am going to put them under my buckets for more support. __________________ 1972 GMC Jimmy 1/2 4X4 4wheel camper 1970 GMC Jimmy 1/2 4X4 350 1969 Chevy Blazer 1/2 4X4 307 1967 chevy LWB 3/4 396

12-13-2013, 05:39 PM	#8
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: Bench seat part out! Let me confirm everything that is left, and may have another seat to part out...I will confirm and notify everyone in the order that was requested...ty Adam

12-13-2013, 05:42 PM	#9
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: Bench seat part out! Thanks! __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

12-15-2013, 05:57 PM	#10
Gary 70 Jimmy Senior Member Join Date: Jan 2002 Location: Burghill, Ohio 44404 Posts: 3,402	Re: Bench seat part out! Looks like I well need 8 zig zag springs I all so need the locking piece and spring on passenger side. __________________ 1972 GMC Jimmy 1/2 4X4 4wheel camper 1970 GMC Jimmy 1/2 4X4 350 1969 Chevy Blazer 1/2 4X4 307 1967 chevy LWB 3/4 396

12-19-2013, 03:28 PM	#11
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: Bench seat part out! I have all the pieces everyone needs...I will get them all laid out and pics taken open Saturday! Thanks for your patience

01-03-2014, 01:33 PM	#12
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: Bench seat part out! Bump, any progress? __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

01-03-2014, 03:55 PM	#13
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: Bench seat part out! I have everything all put aside...I will get it laid out and pics taken for everybody tomorrow...

01-03-2014, 06:09 PM	#14
Gary 70 Jimmy Senior Member Join Date: Jan 2002 Location: Burghill, Ohio 44404 Posts: 3,402	Re: Bench seat part out! I found some zig zag springs just need the piece with the small spring for the seat adjuster and the rod. __________________ 1972 GMC Jimmy 1/2 4X4 4wheel camper 1970 GMC Jimmy 1/2 4X4 350 1969 Chevy Blazer 1/2 4X4 307 1967 chevy LWB 3/4 396

01-03-2014, 08:17 PM	#17
allons Registered User Join Date: Apr 2013 Location: West Liberty, Ohio Posts: 288	Re: Bench seat part out! Do you still have the adjustment rod that runs between the 2 seat mounting brackets?



Register or Log In To remove these advertisements.

01-07-2014, 02:01 AM	#18
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: Bench seat part out! everything posted in previous pics is available..and another entire seat is disassembled and available...here are pics. Please keep in mind your order of interest.

01-07-2014, 04:46 AM	#19
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: Bench seat part out! I need these seat track adjuster parts out of the passenger seat track if you will separate. Price? Also the long coil spring that helps the seat move forward. Price? Also i need the long wire that runs between the seat tracks. Price? Attached Images __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

01-16-2014, 03:00 PM	#22
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: Bench seat part out! Paypal? __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

01-16-2014, 03:57 PM	#24
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,972	Re: Bench seat part out! budnik - I know you haven't mentioned or pictured any - but in your seat disassembly, did you happen to save any of the thin metal rods that are inserted into the seat covers that are used for hog ring attachment points? If so, I'm interested in them. Thanks! I think there are usually 4 of them total (?) (3 different sizes?) per seat cover.

01-28-2014, 03:05 PM	#25
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: Bench seat part out! Budnikguy, have tried to PM you but your box is full, could you please clear it out and send me an update? Thanks! __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

Register or Log In To remove these advertisements.