OK Parting out 72 402 engine - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ksbrktracer · 08-03-2013, 08:51 PM

I have a fairly complete 1972 402 / turbo 400 combo out of a 72 cheyenne super 3/4 ton that I am going to part out. Truck is gone .... No Parts / Only engine parts. This was an old mans truck that had never been messed with

Both exhaust manifolds ....... $150.00 pair with some bolts and flanges, heat shield still on left manifold. ..... sold .... paid
Quadrajet carb .. 7042206 GA throttle shafts are stuck and rusty .....$75.00 ...... sold ........ paid
Air Cleaner for Quad .... Heat tube from exhaust to air cleaner gone. .....$ 40.00 ....sold .... paid
Carb Spacer , hose (junk) and elbow to valve cover ?? between hose and valve cover .... $50.00...sold ..... paid
Valve Cover , bolts and hold-downs ...... $40.00 .....sold ...... paid
BBC oil pressure line , engine half....... $35.00 with brass fittings from block out
Intake manifold ....... 72 dated $30.00 .......sold.... paid
oil pan ..... $45.00 ............ sold..... paid
Lower Alternator Bracket and rear bracket ......$35.00 with bolts ....... sold ....... paid
Power Steering pump with bent pulley and brackets that look OK ...... $75.00 with bolts / no resorvoir
Engine half of motor mounts and bolts ..... $25.00 ...... sold ...... paid
Lower crank pulley .... $45.00 with bolts
Water pump and pulley gone already
Most of the AC comp brackets ..... $100.00 with some bolts , compressor gone .....sold ....PAID
I also have the complete long block that was an 80k engine but has gotten water in it while setting ...... Its stuck , 1972 dated ........ $200.00 / No extras included ........REDUCED ....... $150.00 firm
I also have the turbo 400 trans that has been sitting ...... $100.00 worked but calling it a core.
Few small misc engine brackets and clips
6 spark plug boot shields .....sold ...... paid

Parts also advertised on Craigslist.

Add shipping to all prices . Dont like the price make an offer ..... all I can say is no. big items probably unshippable unless you want it bad enough. If paying with paypal or credit card add3%

I will try to post pics a little bit later

----------------------------------------------------------------------------------------------------------------------------------

This is what I have left at this point .......

BBC oil pressure line , engine half....... $35.00 with brass fittings from block out ..... REDUCED .... $20.00

Power Steering pump with bent pulley and brackets that look OK ...... $75.00 with bolts / no resorvoir .......REDUCED ...... $65.00

I also have the complete long block that was an 80k engine but has gotten water in it while setting ...... Its stuck , 1972 dated ........ $200.00 / No extras included ........REDUCED ....... $150.00

I also have the turbo 400 trans that has been sitting ...... $100.00 worked but calling it a core. ........ FIRM

Lower crank pulley .... $45.00 with bolts

Few small misc engine brackets and clips

teeitup · 08-03-2013, 09:09 PM

Interested in AC brackets and PS pump set up pending pics. And possibly exhaust heat shield if you split it up? Thanks Randy

ksbrktracer · 08-03-2013, 09:15 PM

Quote:

Originally Posted by teeitup

Interested in AC brackets and PS pump set up pending pics. And possibly exhaust heat shield if you split it up? Thanks Randy

I can text pictures right now .... but unable to post to computer right this minute. rather not split shield from manifolds.

I also have plug wire shields as well.

**Razorbacker** · 08-03-2013, 09:31 PM

I'm interested in the follow items:

Both exhaust manifolds ....... $150.00 pair with some bolts and flanges, heat shield still on left manifold.

Air Cleaner for Quad .... Heat tube from exhaust to air cleaner gone. .....$ 40.00

Carb Spacer , hose (junk) and filter ?? between hose and valve cover .... $50.00

Valve Cover , bolts and hold-downs ...... $40.00

Could you send me some pic of the items and would you consider a package deal price?

Thanks,
Tony

ksbrktracer · 08-03-2013, 09:34 PM

Quote:

Originally Posted by teeitup

Interested in AC brackets and PS pump set up pending pics. And possibly exhaust heat shield if you split it up? Thanks Randy

Pictures sent

ksbrktracer · 08-03-2013, 09:36 PM

Quote:

Originally Posted by Razorbacker

I'm interested in the follow items:

Both exhaust manifolds ....... $150.00 pair with some bolts and flanges, heat shield still on left manifold.

Air Cleaner for Quad .... Heat tube from exhaust to air cleaner gone. .....$ 40.00

Carb Spacer , hose (junk) and filter ?? between hose and valve cover .... $50.00

Valve Cover , bolts and hold-downs ...... $40.00

Could you send me some pic of the items and would you consider a package deal price?

Thanks,
Tony

Send a phone # and I can text them

teeitup · 08-03-2013, 09:43 PM

I'll pass on PS stuff but take the AC brackets. Thanks Randy

ksbrktracer · 08-03-2013, 09:48 PM

Most of the AC comp brackets ..... $100.00 with some bolts , compressor gone

sold to teeitup pending payment .

ksbrktracer · 08-04-2013, 11:37 AM

#0001 will add more shortly

ksbrktracer · 08-04-2013, 12:06 PM

#0002

ksbrktracer · 08-04-2013, 12:08 PM

#0003

ksbrktracer · 08-04-2013, 12:10 PM

#0004

ksbrktracer · 08-04-2013, 12:12 PM

Quote:

Originally Posted by Razorbacker

I'm interested in the follow items:

Both exhaust manifolds ....... $150.00 pair with some bolts and flanges, heat shield still on left manifold.

Air Cleaner for Quad .... Heat tube from exhaust to air cleaner gone. .....$ 40.00

Carb Spacer , hose (junk) and filter ?? between hose and valve cover .... $50.00

Valve Cover , bolts and hold-downs ...... $40.00

Could you send me some pic of the items and would you consider a package deal price?

Thanks,
Tony

sold ....pending payment , throwing in plug shields with deal ALL PARTS PAID FOR

ksbrktracer · 08-04-2013, 11:36 PM

Quote:

Originally Posted by teeitup

interested in ac brackets and ps pump set up pending pics. And possibly exhaust heat shield if you split it up? Thanks randy

parts will ship monday randy .......

Quote:

Originally Posted by razorbacker

i'm interested in the follow items:

Both exhaust manifolds ....... $150.00 pair with some bolts and flanges, heat shield still on left manifold.

Air cleaner for quad .... Heat tube from exhaust to air cleaner gone. .....$ 40.00

carb spacer , hose (junk) and filter ?? Between hose and valve cover .... $50.00

valve cover , bolts and hold-downs ...... $40.00

could you send me some pic of the items and would you consider a package deal price?

Thanks,
tony

text message sent with total , ready to ship, can ship monday pending payment ........ PAID

cwilkie · 08-04-2013, 11:42 PM

Would you take $25 for the lower alternator bracket? Shipping to 58316.
Posted via Mobile Device

Interested in the carb as well. Would you post more picks.

ksbrktracer · 08-04-2013, 11:55 PM

Quote:

Originally Posted by cwilkie

Would you take $25 for the lower alternator bracket? Shipping to 58316.
Posted via Mobile Device

Interested in the carb as well. Would you post more picks.

Im firm on the alternator bracket , but I will throw in the back bracket, forgot it was there. That would be 2 of the 3 required .
I dont have any other pics of the carb, but as said throttle plates are rusty and stuck but sprayed it with PB-blaster and got some of it loosened up. If you buy it all ..... I will take $100.00 +3% if you use paypal + shipping which be very reasonable , small and fairly light.

ksbrktracer · 08-05-2013, 09:56 PM

All sold parts are paid for ...............

List updated ..............!

**gmc 2500 4x4** · 08-06-2013, 05:28 AM

Engine half of motor mounts and bolts ..... $25.00, i'll take 14063

DkOlive72 · 08-06-2013, 05:59 AM

Can't tell from the thread.. (so I apologize in advance) Is the upper back alternator bracket (looks more like a straight rod than a bracket) still available?

cwilkie · 08-06-2013, 01:53 PM

Is that back bracket that support rod with mounting tabs on each end? If so, I will take the big block lower alternator bracket, support rod, and carb for $100.00 plus shipping. I will be paying via PayPal so include the 3% fee in your total. PM me the total cost. Thanks!

ksbrktracer · 08-06-2013, 07:03 PM

Quote:

Originally Posted by gmc 2500 4x4

Engine half of motor mounts and bolts ..... $25.00, i'll take 14063

USPS ..... runs $12.45 cheapest thing Ive seen if that will work for you ...? let me Know

Quote:

Originally Posted by DkOlive72

Can't tell from the thread.. (so I apologize in advance) Is the upper back alternator bracket (looks more like a straight rod than a bracket) still available?

I had offered it to cwilkie in a package deal which I believe he is taking ... pending payment

Quote:

Originally Posted by cwilkie

Is that back bracket that support rod with mounting tabs on each end? If so, I will take the big block lower alternator bracket, support rod, and carb for $100.00 plus shipping. I will be paying via PayPal so include the 3% fee in your total. PM me the total cost. Thanks!

I will get a total for you and let you know this evening

**gmc 2500 4x4** · 08-06-2013, 08:47 PM

(USPS ..... runs $12.45 cheapest thing Ive seen if that will work for you ...? let me Know)

pm me your payment info>>>thanx

ksbrktracer · 08-06-2013, 08:56 PM

Quote:

Originally Posted by gmc 2500 4x4

(USPS ..... runs $12.45 cheapest thing Ive seen if that will work for you ...? let me Know)

pm me your payment info>>>thanx

pm sent

EDIT : Payment recieved .....PM returned again

cwilkie · 08-06-2013, 10:07 PM

Pm sent.
Posted via Mobile Device

ksbrktracer · 08-06-2013, 10:46 PM

Quote:

Originally Posted by cwilkie

Pm sent.
Posted via Mobile Device

Invoice sent , please send shipping addres , ready to send out tomorrow.

08-03-2013, 08:51 PM	#1
ksbrktracer TNT-MOTORSPORTS Join Date: Mar 2008 Location: TULSA OKLAHOMA Posts: 2,692	Parting out 72 402 engine I have a fairly complete 1972 402 / turbo 400 combo out of a 72 cheyenne super 3/4 ton that I am going to part out. Truck is gone .... No Parts / Only engine parts. This was an old mans truck that had never been messed with Both exhaust manifolds ....... $150.00 pair with some bolts and flanges, heat shield still on left manifold. ..... sold .... paid Quadrajet carb .. 7042206 GA throttle shafts are stuck and rusty .....$75.00 ...... sold ........ paid Air Cleaner for Quad .... Heat tube from exhaust to air cleaner gone. .....$ 40.00 ....sold .... paid Carb Spacer , hose (junk) and elbow to valve cover ?? between hose and valve cover .... $50.00...sold ..... paid Valve Cover , bolts and hold-downs ...... $40.00 .....sold ...... paid BBC oil pressure line , engine half....... $35.00 with brass fittings from block out Intake manifold ....... 72 dated $30.00 .......sold.... paid oil pan ..... $45.00 ............ sold..... paid Lower Alternator Bracket and rear bracket ......$35.00 with bolts ....... sold ....... paid Power Steering pump with bent pulley and brackets that look OK ...... $75.00 with bolts / no resorvoir Engine half of motor mounts and bolts ..... $25.00 ...... sold ...... paid Lower crank pulley .... $45.00 with bolts Water pump and pulley gone already Most of the AC comp brackets ..... $100.00 with some bolts , compressor gone .....sold ....PAID I also have the complete long block that was an 80k engine but has gotten water in it while setting ...... Its stuck , 1972 dated ........ $200.00 / No extras included ........REDUCED ....... $150.00 firm I also have the turbo 400 trans that has been sitting ...... $100.00 worked but calling it a core. Few small misc engine brackets and clips 6 spark plug boot shields .....sold ...... paid Parts also advertised on Craigslist. Add shipping to all prices . Dont like the price make an offer ..... all I can say is no. big items probably unshippable unless you want it bad enough. If paying with paypal or credit card add3% I will try to post pics a little bit later ---------------------------------------------------------------------------------------------------------------------------------- This is what I have left at this point ....... BBC oil pressure line , engine half....... $35.00 with brass fittings from block out ..... REDUCED .... $20.00 Power Steering pump with bent pulley and brackets that look OK ...... $75.00 with bolts / no resorvoir .......REDUCED ...... $65.00 I also have the complete long block that was an 80k engine but has gotten water in it while setting ...... Its stuck , 1972 dated ........ $200.00 / No extras included ........REDUCED ....... $150.00 I also have the turbo 400 trans that has been sitting ...... $100.00 worked but calling it a core. ........ FIRM Lower crank pulley .... $45.00 with bolts Few small misc engine brackets and clips Last edited by ksbrktracer; 08-19-2013 at 01:18 AM. Reason: UPDATE ADD

08-03-2013, 09:09 PM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting out 72 402 engine Interested in AC brackets and PS pump set up pending pics. And possibly exhaust heat shield if you split it up? Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-03-2013, 09:31 PM	#4
Razorbacker Senior Member Join Date: Aug 2011 Location: Benton, AR. Posts: 239	Re: Parting out 72 402 engine I'm interested in the follow items: Both exhaust manifolds ....... $150.00 pair with some bolts and flanges, heat shield still on left manifold. Air Cleaner for Quad .... Heat tube from exhaust to air cleaner gone. .....$ 40.00 Carb Spacer , hose (junk) and filter ?? between hose and valve cover .... $50.00 Valve Cover , bolts and hold-downs ...... $40.00 Could you send me some pic of the items and would you consider a package deal price? Thanks, Tony

08-03-2013, 09:43 PM	#7
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting out 72 402 engine I'll pass on PS stuff but take the AC brackets. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-03-2013, 09:48 PM	#8
ksbrktracer TNT-MOTORSPORTS Join Date: Mar 2008 Location: TULSA OKLAHOMA Posts: 2,692	Re: Parting out 72 402 engine Most of the AC comp brackets ..... $100.00 with some bolts , compressor gone sold to teeitup pending payment .

08-04-2013, 11:37 AM	#9
ksbrktracer TNT-MOTORSPORTS Join Date: Mar 2008 Location: TULSA OKLAHOMA Posts: 2,692	Re: Parting out 72 402 engine #0001 will add more shortly Attached Images

08-04-2013, 12:06 PM	#10
ksbrktracer TNT-MOTORSPORTS Join Date: Mar 2008 Location: TULSA OKLAHOMA Posts: 2,692	Re: Parting out 72 402 engine #0002 Attached Images

08-04-2013, 12:08 PM	#11
ksbrktracer TNT-MOTORSPORTS Join Date: Mar 2008 Location: TULSA OKLAHOMA Posts: 2,692	Re: Parting out 72 402 engine #0003 Attached Images

08-04-2013, 12:10 PM	#12
ksbrktracer TNT-MOTORSPORTS Join Date: Mar 2008 Location: TULSA OKLAHOMA Posts: 2,692	Re: Parting out 72 402 engine #0004 Attached Images

08-04-2013, 11:42 PM	#15
cwilkie Chance Join Date: Sep 2001 Location: Belcourt ,ND, USA Posts: 750	Re: Parting out 72 402 engine Would you take $25 for the lower alternator bracket? Shipping to 58316. Posted via Mobile Device Interested in the carb as well. Would you post more picks. __________________ 1968 Chevrolet Stepside BB 396 w/TH400 1972 Chevrolet 3/4 Ton 4x4 BB 496 w/TH400 Last edited by cwilkie; 08-04-2013 at 11:45 PM. Reason: Added carb request

08-05-2013, 09:56 PM	#17
ksbrktracer TNT-MOTORSPORTS Join Date: Mar 2008 Location: TULSA OKLAHOMA Posts: 2,692	Re: Parting out 72 402 engine All sold parts are paid for ............... List updated ..............!

08-06-2013, 05:28 AM	#18
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,972	Re: Parting out 72 402 engine Engine half of motor mounts and bolts ..... $25.00, i'll take 14063

08-06-2013, 05:59 AM	#19
DkOlive72 Registered User Join Date: May 2013 Location: Seattle, WA Posts: 28	Re: Parting out 72 402 engine Can't tell from the thread.. (so I apologize in advance) Is the upper back alternator bracket (looks more like a straight rod than a bracket) still available?

08-06-2013, 01:53 PM	#20
cwilkie Chance Join Date: Sep 2001 Location: Belcourt ,ND, USA Posts: 750	Re: Parting out 72 402 engine Is that back bracket that support rod with mounting tabs on each end? If so, I will take the big block lower alternator bracket, support rod, and carb for $100.00 plus shipping. I will be paying via PayPal so include the 3% fee in your total. PM me the total cost. Thanks! __________________ 1968 Chevrolet Stepside BB 396 w/TH400 1972 Chevrolet 3/4 Ton 4x4 BB 496 w/TH400

08-06-2013, 08:47 PM	#22
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,972	Re: Parting out 72 402 engine (USPS ..... runs $12.45 cheapest thing Ive seen if that will work for you ...? let me Know) pm me your payment info>>>thanx



Register or Log In To remove these advertisements.

08-06-2013, 10:07 PM	#24
cwilkie Chance Join Date: Sep 2001 Location: Belcourt ,ND, USA Posts: 750	Re: Parting out 72 402 engine Pm sent. Posted via Mobile Device __________________ 1968 Chevrolet Stepside BB 396 w/TH400 1972 Chevrolet 3/4 Ton 4x4 BB 496 w/TH400

Register or Log In To remove these advertisements.