'59 chevy truck title - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Bruce B · 07-03-2003, 09:41 AM

Anybody got one for sale? If not, got any suggestions on how I can get one? I don't have a VIN # plate either. someone told me I could use the engine serial # as the VIN #. I could use some input. thanks

Seon · 07-03-2003, 10:19 AM

Depends on which state you're live. Is there a vin tag on your truck? If so, you could have you're DMV run a check and if it's not in their computer, you could get a bill of sale from a friend and with their proper paperwork they'll issue you a title.

Bruce B · 07-03-2003, 10:45 AM

Thanks Seon. I'm in Florida and I have no Vin#. I've seen a couple services on the internet that will provide a title but, I don't know anyone that has any experience with this.

john j · 07-04-2003, 11:01 AM

Bruce if you have the orginal front clip,about 8 inches to the front of the steering box there is a number stamped into the frame. That should get u the serial number. Here in NH if you have a bill of sale you can get a title. johnj

NAPCO ken · 07-22-2003, 06:08 PM

I have a '59 VIN and clear title from a 1/2 ton that I parted out. Contact me if you're interested in going that route.

07-03-2003, 09:41 AM	#1
Bruce B Registered User Join Date: Feb 2003 Location: Tampa, FL Posts: 34	'59 chevy truck title Anybody got one for sale? If not, got any suggestions on how I can get one? I don't have a VIN # plate either. someone told me I could use the engine serial # as the VIN #. I could use some input. thanks Attached Images __________________ Drive it like you stole it!

07-03-2003, 10:45 AM	#3
Bruce B Registered User Join Date: Feb 2003 Location: Tampa, FL Posts: 34	Thanks Seon. I'm in Florida and I have no Vin#. I've seen a couple services on the internet that will provide a title but, I don't know anyone that has any experience with this. __________________ Drive it like you stole it!

07-04-2003, 11:01 AM	#4
john j Registered User Join Date: Mar 2003 Location: Newport NH Posts: 216	Bruce if you have the orginal front clip,about 8 inches to the front of the steering box there is a number stamped into the frame. That should get u the serial number. Here in NH if you have a bill of sale you can get a title. johnj __________________ you laugh at me cause i'm different ; i laugh at you cause you're the same

07-22-2003, 06:08 PM	#5
NAPCO ken Registered User Join Date: Aug 2001 Location: anaheim, ca Posts: 187	I have a '59 VIN and clear title from a 1/2 ton that I parted out. Contact me if you're interested in going that route. __________________ ken '58 Chev NAPCO 4x4 short '60 GMC Suburban 4x4, restored '60 GMC 3/4T stepside 4x4 '64 GMC Suburban 4x4, restored '90 Chev Suburban 4x4, dually, ZZ502 '77 GMC Suburban 4x4, one ton axles, 12" lift, 39.5"s '88 Chevy crewcab dually 4x4, 10" lift, 42"s (x6!) '03 Jeep Wrangler Rubicon '79 Chev 3/4 Suburban 4x4, 400-400-203

07-03-2003, 10:19 AM	#2
Seon Registered User Join Date: Nov 2002 Location: Northern CA. Posts: 503	Depends on which state you're live. Is there a vin tag on your truck? If so, you could have you're DMV run a check and if it's not in their computer, you could get a bill of sale from a friend and with their proper paperwork they'll issue you a title.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.