Door wire loom or boot - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ChevyNewb · 08-06-2013, 02:47 PM

Looked around a bit, but could not seem to find anything. Anyone had luck with a door loom to protect wiring in the junction from the A pillar to the door? Might just see if I can find a couple at the junkyard. Looking for anyone that can say "hey, get the loom/boot off of a..., it will work great!" just hiding the power lock wires, but have had one cut already and want to avoid in the future!

**nitrosport_5** · 08-06-2013, 03:19 PM

I am interested as well. Bought some on ebay that looked like they would work from a new-er corvette.. but they were huge so back to the drawing board!

08-06-2013, 02:47 PM	#1
ChevyNewb Registered User Join Date: Jan 2012 Location: Venice, FL Posts: 153	Door wire loom or boot Looked around a bit, but could not seem to find anything. Anyone had luck with a door loom to protect wiring in the junction from the A pillar to the door? Might just see if I can find a couple at the junkyard. Looking for anyone that can say "hey, get the loom/boot off of a..., it will work great!" just hiding the power lock wires, but have had one cut already and want to avoid in the future! __________________ '68 Longbed Stepper. Mango Tango

08-06-2013, 03:19 PM	#2
nitrosport_5 Registered User Join Date: Jul 2012 Location: St. John, Washington Posts: 618	Re: Door wire loom or boot I am interested as well. Bought some on ebay that looked like they would work from a new-er corvette.. but they were huge so back to the drawing board! __________________ "Rusty" 1972 K20 Cheyenne Super, 496, A/C, Tilt, Tach, Buckets, 4l80e/NP205, 4" Rancho Lift, 35" BFG AT "Ramp Truck" 1972 C30 Ramp Truck 350, Air Bags, Factory A/C. "1968" C10 Shortbed project



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.