WA Need bucket seat track adjustment rod - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**nitrosport_5** · 08-08-2013, 10:50 PM

Hi, i need the rod that connects the 2 sides of bucket seat tracks together. I was missing the key lock shaft that locks the tracks in place, but i robbed it off of an old bench seat i had. So now i just need the rod that attaches each side of tracks together and alows them to be released to move forward and back. Thanks

teeitup · 08-09-2013, 06:45 AM

I've got a stock rod or the stock wire with clips, there were two different types for seats, the wire would cheaper for you because of shipping. Rod is $10 plus shipping and wire is $15 shipped. Thanks Randy

**nitrosport_5** · 08-09-2013, 03:17 PM

I didnt realize the wire was correct for the seats as well. I have that off of an old bench seat i may as well just modify and make work.

I appreciate the offer though Randy!

**davestrucks** · 10-27-2013, 08:44 PM

Do you still have a driver side rod for bucket seats ?

08-08-2013, 10:50 PM	#1
nitrosport_5 Registered User Join Date: Jul 2012 Location: St. John, Washington Posts: 618	Need bucket seat track adjustment rod Hi, i need the rod that connects the 2 sides of bucket seat tracks together. I was missing the key lock shaft that locks the tracks in place, but i robbed it off of an old bench seat i had. So now i just need the rod that attaches each side of tracks together and alows them to be released to move forward and back. Thanks __________________ "Rusty" 1972 K20 Cheyenne Super, 496, A/C, Tilt, Tach, Buckets, 4l80e/NP205, 4" Rancho Lift, 35" BFG AT "Ramp Truck" 1972 C30 Ramp Truck 350, Air Bags, Factory A/C. "1968" C10 Shortbed project

08-09-2013, 06:45 AM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Need bucket seat track adjustment rod I've got a stock rod or the stock wire with clips, there were two different types for seats, the wire would cheaper for you because of shipping. Rod is $10 plus shipping and wire is $15 shipped. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-09-2013, 03:17 PM	#3
nitrosport_5 Registered User Join Date: Jul 2012 Location: St. John, Washington Posts: 618	Re: Need bucket seat track adjustment rod I didnt realize the wire was correct for the seats as well. I have that off of an old bench seat i may as well just modify and make work. I appreciate the offer though Randy! __________________ "Rusty" 1972 K20 Cheyenne Super, 496, A/C, Tilt, Tach, Buckets, 4l80e/NP205, 4" Rancho Lift, 35" BFG AT "Ramp Truck" 1972 C30 Ramp Truck 350, Air Bags, Factory A/C. "1968" C10 Shortbed project

10-27-2013, 08:44 PM	#4
davestrucks Senior Member Join Date: Dec 2008 Location: Northglenn Co Posts: 622	Re: Need bucket seat track adjustment rod Do you still have a driver side rod for bucket seats ?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.