Bed liner/mat - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*71SWB* · 08-14-2013, 12:07 AM

I'm trying to locate a heavy good quality bed matt for a 71 cheyenne swb. I tried to search the forum however it didn't work. I can not seem to locate a bed matt. Has anybody bought one and if so where can I buy one?

Lee H · 08-14-2013, 10:24 AM

They are no longer available. You'll have to by one for long bed and cut it to fit. I got mine from Summit for a 76 long bed. The only real issue is that the wheel houses for the next gen pickup is about 4" longer so you will have that gap or you can split the difference and trim both the front and rear to have a 2" gap on the front and rear of the wheel house. That's what I did. It is very heavy duty and works well, better than none at all. About $90 bucks to my door.
Posted via Mobile Device

**yote1234** · 08-14-2013, 02:06 PM

try over the parts counter at the chevrolet dealer. they are nice! 100.00

Undone · 08-14-2013, 07:44 PM

Quote:

Originally Posted by yote1234

try over the parts counter at the chevrolet dealer. they are nice! 100.00

For a 67-72 or square body?

sstone69 · 08-14-2013, 08:15 PM

I did what LeeH did except I cut it so I can overlay the extra piece over the gap at the wheel well. Also can slide the extra piece over the tail gate keeps it from scratching.
Posted via Mobile Device

**yote1234** · 08-14-2013, 08:21 PM

Quote:

Originally Posted by Undone

For a 67-72 or square body?

not positive but will check on it as i was told they fit . will keep you updated.

**70cst** · 08-14-2013, 08:32 PM

Here you go ...

rubber bed mat questions
http://http://67-72chevytrucks.com/v...d.php?t=396936

Tuff Stuff USA
http://www.truckstuffusa.com/molheavbedma.html

Real Truck
http://www.realtruck.com/driver-desi...970Y852MA.html

**yote1234** · 08-14-2013, 09:13 PM

looks like the 2014 gmc short bed measures 69.33" and i belive 71/72 short bed is 72". i will call in the am, as im looking also.

**70cst** · 08-14-2013, 09:23 PM

Quote:

Originally Posted by yote1234

looks like the 2014 gmc short bed measures 69.33" and i belive 71/72 short bed is 72". i will call in the am, as im looking also.

"Real Truck" ... shows mats for our trucks but... I would call first.

BLACKLINE61 · 08-15-2013, 09:18 AM

I just bought this one for mine, cheap but great quality!
http://www.streetsideauto.com/p/protecta-6721d/

*71SWB* · 08-15-2013, 10:13 AM

Thank you to everyone for the information

Bigdav160 · 08-15-2013, 10:58 AM

Quote:

Originally Posted by BLACKLINE61

I just bought this one for mine, cheap but great quality!
http://www.streetsideauto.com/p/protecta-6721d/

Tell us more about this mat. Does it have the wheelhouse cutouts? How does it fit?

I'm thinking of putting one in my Suburban but I'd like to do the trimming.

BLACKLINE61 · 08-15-2013, 11:25 AM

cuts to fit easily with a razor blade, no fender cutouts as is, I'm very happy with it heres a pic

*71SWB* · 08-15-2013, 08:46 PM

Looks awesome

kenoverbey · 11-18-2013, 04:03 PM

Just pulled the trigger on this...I'll keep ya posted.....

**leddzepp** · 12-13-2013, 01:35 AM

Quote:

Originally Posted by 70cst

"Real Truck" ... shows mats for our trucks but... I would call first.

I just pulled the trigger on this one. They had the ONLY listing specifically for 67-72 trucks (LWB, no SWB option). For all I know it could be the same as the 73-up mat

but if you read the reviews two guys with LWB 67-72 trucks say it fits great and rate it 5 out of 5. I am curious how it fits around the wheel wells...since trimming the excess to center it front to back on a SWB bed is no problem.

**70cst** · 12-13-2013, 02:04 AM

Try this ...

http://www.ncnwest.com/rbr/trkc.htm

The 73-87 will be a very close fit.

Also JC Whitney for 1970

http://http://www.jcwhitney.com/bedr...51327y1970g2j2

72heritage · 12-13-2013, 02:32 PM

Why not putting a clear 3M pellicule.....Less chance to get humidity infiltrate under and invisible. Protect again scrach to. Just rip it off when it get to scrachy and put a new one.

1972SUPERSB · 12-13-2013, 02:50 PM

Quote:

Originally Posted by leddzepp

I just pulled the trigger on this one. They had the ONLY listing specifically for 67-72 trucks (LWB, no SWB option). For all I know it could be the same as the 73-up mat

but if you read the reviews two guys with LWB 67-72 trucks say it fits great and rate it 5 out of 5. I am curious how it fits around the wheel wells...since trimming the excess to center it front to back on a SWB bed is no problem.

I'm curious how this one fits too. Keep us posted.

08-14-2013, 12:07 AM	#1
71SWB Registered User Join Date: Aug 2013 Location: Va Posts: 165	Bed liner/mat I'm trying to locate a heavy good quality bed matt for a 71 cheyenne swb. I tried to search the forum however it didn't work. I can not seem to locate a bed matt. Has anybody bought one and if so where can I buy one?

08-14-2013, 10:24 AM	#2
Lee H Registered User Join Date: Jun 2010 Location: Upland Ca Posts: 4,147	Re: Bed liner/mat They are no longer available. You'll have to by one for long bed and cut it to fit. I got mine from Summit for a 76 long bed. The only real issue is that the wheel houses for the next gen pickup is about 4" longer so you will have that gap or you can split the difference and trim both the front and rear to have a 2" gap on the front and rear of the wheel house. That's what I did. It is very heavy duty and works well, better than none at all. About $90 bucks to my door. Posted via Mobile Device __________________ 1972 C10 SWB, Air, PS, PB, 350/350THM. Second owner. 1965 Corvette roadster, 44K miles, 327/365 SHP, 4 speed, side exhaust, knockoffs, teak, second owner (bought in 1970), Have ALL numbers matching components. My frame off restoration thread: http://67-72chevytrucks.com/vboard/s...d.php?t=556703

08-14-2013, 02:06 PM	#3
yote1234 Senior Member Join Date: Feb 2003 Location: Gold Canyon Arizona Posts: 4,406	Re: Bed liner/mat try over the parts counter at the chevrolet dealer. they are nice! 100.00 __________________ 1971 K5 CST Blazer 1965 Chevelle Malibu 283 (sadly sold) 1968 Camaro 327 1968 Honda mini-trail z50a #377 1966 uh 1-D Huey

08-14-2013, 08:15 PM	#5
sstone69 Registered User Join Date: Oct 2010 Location: Tucker, GA Posts: 128	Re: Bed liner/mat I did what LeeH did except I cut it so I can overlay the extra piece over the gap at the wheel well. Also can slide the extra piece over the tail gate keeps it from scratching. Posted via Mobile Device __________________ "You gonna pull them pistols or whistle dixie ?"

08-14-2013, 08:32 PM	#7
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,373	Re: Bed liner/mat Here you go ... rubber bed mat questions http://http://67-72chevytrucks.com/v...d.php?t=396936 Tuff Stuff USA http://www.truckstuffusa.com/molheavbedma.html Real Truck http://www.realtruck.com/driver-desi...970Y852MA.html __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

08-14-2013, 09:13 PM	#8
yote1234 Senior Member Join Date: Feb 2003 Location: Gold Canyon Arizona Posts: 4,406	Re: Bed liner/mat looks like the 2014 gmc short bed measures 69.33" and i belive 71/72 short bed is 72". i will call in the am, as im looking also. __________________ 1971 K5 CST Blazer 1965 Chevelle Malibu 283 (sadly sold) 1968 Camaro 327 1968 Honda mini-trail z50a #377 1966 uh 1-D Huey

08-15-2013, 09:18 AM	#10
BLACKLINE61 Registered User Join Date: Feb 2013 Location: a****er ca Posts: 43	Re: Bed liner/mat I just bought this one for mine, cheap but great quality! http://www.streetsideauto.com/p/protecta-6721d/

08-15-2013, 10:13 AM	#11
71SWB Registered User Join Date: Aug 2013 Location: Va Posts: 165	Re: Bed liner/mat Thank you to everyone for the information

08-15-2013, 11:25 AM	#13
BLACKLINE61 Registered User Join Date: Feb 2013 Location: a****er ca Posts: 43	Re: Bed liner/mat cuts to fit easily with a razor blade, no fender cutouts as is, I'm very happy with it heres a pic

08-15-2013, 08:46 PM	#14
71SWB Registered User Join Date: Aug 2013 Location: Va Posts: 165	Re: Bed liner/mat Looks awesome

11-18-2013, 04:03 PM	#15
kenoverbey Registered User Join Date: Feb 2006 Location: mount juliet Posts: 12	Re: Bed liner/mat Just pulled the trigger on this...I'll keep ya posted..... __________________ 1968 Black SWB lowered, 20" coys

12-13-2013, 02:04 AM	#17
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,373	Re: Bed liner/mat Try this ... http://www.ncnwest.com/rbr/trkc.htm The 73-87 will be a very close fit. Also JC Whitney for 1970 http://http://www.jcwhitney.com/bedr...51327y1970g2j2 __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

12-13-2013, 02:32 PM	#18
72heritage Registered User Join Date: Sep 2012 Location: Quebec,Canada Posts: 71	Re: Bed liner/mat Why not putting a clear 3M pellicule.....Less chance to get humidity infiltrate under and invisible. Protect again scrach to. Just rip it off when it get to scrachy and put a new one.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.