How can i make my interior heater box look factory? pics of yours? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Drewski23 · 08-17-2013, 11:29 PM

Hello,

My box needs something done with it, i was thinking semi gloss black but im pretty sure they came factory unpainted..im not doing a 100 percent correct restoration so its ok but i just want a factory-ish look to it...curious what you all have done with yours

FLDBRED · 08-18-2013, 09:02 AM

I painted mine Glooss Black, and it came out nice.

**Tom Vogel** · 08-18-2013, 09:40 AM

If you wet sand it with fine sand paper and hit it with semi gloss clear, it will look brand new. Thats what I did on my 69.

bobs409 · 08-18-2013, 11:59 AM

I believe they were painted from the factory. All the ones I ever saw were either a semi-gloss black or gloss black.

Drewski23 · 08-18-2013, 12:17 PM

Interesting...ive now heard they were bare and ive heard they were painted...hoping someone can confirm...not a huge deal either way...would look fine black i guess
Posted via Mobile Device

**Tom Vogel** · 08-18-2013, 03:54 PM

Quote:

Originally Posted by bobs409

I believe they were painted from the factory. All the ones I ever saw were either a semi-gloss black or gloss black.

Never ever seen one painted (that was stock and unmolested). Ill add that my first one of these trucks was bought new, so Ive been around. Not saying it didnt happen, just seen alot of them and all the unmolested ones were bare.

**71blksuper4x4** · 08-18-2013, 04:34 PM

Are you talking the one on the firewall in the engine compartment or the interior side? Trevor
Posted via Mobile Device

Drewski23 · 08-18-2013, 04:47 PM

Quote:

Originally Posted by 71blksuper4x4

Are you talking the one on the firewall in the engine compartment or the interior side? Trevor
Posted via Mobile Device

Interior
Posted via Mobile Device

leftybass209 · 08-18-2013, 06:08 PM

I have both a 69, metal style, and a 71, with the plastic. Both are original, never been hit with any aftermarket paint, and both are semi-gloss black. I don't know where people get that they aren't painted. A non painted box would be metallic colored and most likely rust colored from years of service. Neither of my heater boxes represent that. They have the same look that an electro dipped fender has.
Posted via Mobile Device

Drewski23 · 08-18-2013, 06:19 PM

Quote:

Originally Posted by leftybass209

I have both a 69, metal style, and a 71, with the plastic. Both are original, never been hit with any aftermarket paint, and both are semi-gloss black. I don't know where people get that they aren't painted. A non painted box would be metallic colored and most likely rust colored from years of service. Neither of my heater boxes represent that. They have the same look that an electro dipped fender has.
Posted via Mobile Device

interesting...i just assumed that the reason everyones are painted is because of the fact that they were bare and they would have been rusted out by now if not. Maybe some were and some werent? its not impossible i guess..ill be painting it semi gloss black though....thanks for the answers fellas.

leftybass209 · 08-18-2013, 07:06 PM

Foot in my mouth! I am starting at the box of the 71 right now. Its not semi gloss black. It is a metallic charcoal grey. Still coated though. I may snap a pic when I get it whipped down better, for a more accurate photo.
Posted via Mobile Device

leftybass209 · 08-18-2013, 07:31 PM

Here is the picture of the metal portion of a 71 heater box. You can see in the bottom right section some paint is scuffed away showing it is some kind of a coating.

Posted via Mobile Device
Posted via Mobile Device

1972RedNeck · 08-18-2013, 07:54 PM

Quote:

Originally Posted by Tom Vogel

Never ever seen one painted (that was stock and unmolested). Ill add that my first one of these trucks was bought new, so Ive been around. Not saying it didnt happen, just seen alot of them and all the unmolested ones were bare.

The metal ones were painted.

**Tom Vogel** · 08-18-2013, 09:07 PM

Ohhhh... Ok, you are talking about the lowest portion. I was talking about the diverted and portions that hold the evap and heater core.
As I recall, the lower in cab part is indeed a charcoal metallic paint. Sorry for the misunderstanding.
Posted via Mobile Device

08-17-2013, 11:29 PM	#1
Drewski23 Registered User Join Date: Jun 2013 Location: Saint Louis, MO Posts: 142	How can i make my interior heater box look factory? pics of yours? Hello, My box needs something done with it, i was thinking semi gloss black but im pretty sure they came factory unpainted..im not doing a 100 percent correct restoration so its ok but i just want a factory-ish look to it...curious what you all have done with yours

08-18-2013, 09:02 AM	#2
FLDBRED Registered User Join Date: Jun 2009 Location: CENTRAL,NJ Posts: 586	Re: How can i make my interior heater box look factory? pics of yours? I painted mine Glooss Black, and it came out nice.

08-18-2013, 09:40 AM	#3
Tom Vogel 2WD Jimmy Join Date: Mar 2005 Location: Davis County, Utah Posts: 2,565	Re: How can i make my interior heater box look factory? pics of yours? If you wet sand it with fine sand paper and hit it with semi gloss clear, it will look brand new. Thats what I did on my 69.

08-18-2013, 11:59 AM	#4
bobs409 1969 Custom 30 wrecker Join Date: Sep 2001 Location: Pottsville, Pa Posts: 2,611	Re: How can i make my interior heater box look factory? pics of yours? I believe they were painted from the factory. All the ones I ever saw were either a semi-gloss black or gloss black. __________________ Bob 63 Impala 283/PG/3.36 (under restoration) 66 Impala 327/PG/3.36 66 Chevelle SS 409/M22/3.55 69 Chevelle 307/PG/3.08 (future restoration) 69 C10 short stepside 454/TH350/3.73 69 Custom 30 tow truck 350/4 spd/4.10 (resto done, CRUISIN TIME!) 71 Cheyenne 20 fleetside 350/4 spd/4.10 71 Chevelle 6/PG/3.08 72 Chevelle 454/M21/4.10

08-18-2013, 12:17 PM	#5
Drewski23 Registered User Join Date: Jun 2013 Location: Saint Louis, MO Posts: 142	Re: How can i make my interior heater box look factory? pics of yours? Interesting...ive now heard they were bare and ive heard they were painted...hoping someone can confirm...not a huge deal either way...would look fine black i guess Posted via Mobile Device

08-18-2013, 04:34 PM	#7
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: How can i make my interior heater box look factory? pics of yours? Are you talking the one on the firewall in the engine compartment or the interior side? Trevor Posted via Mobile Device __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

08-18-2013, 06:08 PM	#9
leftybass209 Registered User Join Date: Feb 2011 Location: Modesto, CA Posts: 2,189	Re: How can i make my interior heater box look factory? pics of yours? I have both a 69, metal style, and a 71, with the plastic. Both are original, never been hit with any aftermarket paint, and both are semi-gloss black. I don't know where people get that they aren't painted. A non painted box would be metallic colored and most likely rust colored from years of service. Neither of my heater boxes represent that. They have the same look that an electro dipped fender has. Posted via Mobile Device

08-18-2013, 07:06 PM	#11
leftybass209 Registered User Join Date: Feb 2011 Location: Modesto, CA Posts: 2,189	Re: How can i make my interior heater box look factory? pics of yours? Foot in my mouth! I am starting at the box of the 71 right now. Its not semi gloss black. It is a metallic charcoal grey. Still coated though. I may snap a pic when I get it whipped down better, for a more accurate photo. Posted via Mobile Device

08-18-2013, 07:31 PM	#12
leftybass209 Registered User Join Date: Feb 2011 Location: Modesto, CA Posts: 2,189	Re: How can i make my interior heater box look factory? pics of yours? Here is the picture of the metal portion of a 71 heater box. You can see in the bottom right section some paint is scuffed away showing it is some kind of a coating. Posted via Mobile Device Posted via Mobile Device

08-18-2013, 09:07 PM	#14
Tom Vogel 2WD Jimmy Join Date: Mar 2005 Location: Davis County, Utah Posts: 2,565	Re: How can i make my interior heater box look factory? pics of yours? Ohhhh... Ok, you are talking about the lowest portion. I was talking about the diverted and portions that hold the evap and heater core. As I recall, the lower in cab part is indeed a charcoal metallic paint. Sorry for the misunderstanding. Posted via Mobile Device



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.