NM Vintage Silver Selectro Hubs for 3/4t K20 4x4's

[DeadheadNM]

From my K20 - I've since gone with OEM Spicers. These look nice and turned fine when installed on my K20. I never drove my K20 before tearing into a resto. I have no reason to suspect these are bad. $125 plus shipping. Would take partial trade for a set of saddle defrost vents. Also looking for sliding windows for a Blazer top. Thanks. Pete

[DeadheadNM]

ttt

[DeadheadNM]

$125 shipped

[BLAZERMAN]

I'm going to give you guys one more chance on these, I don't need them right now or I would jump on them! These are by far the best locking hubs made to replace the big Spicers...yes even better than the Warn 9072s that cost 300.00 They are period correct and if there here much longer they will be in my stash.
Posted via Mobile Device

[special-K]

Hey Pete, how about $100 plus a trade for that spare tire plate & Galles dealer ad tag? I have some other little Blazer stuff,too,like jack mount hardware,rear interior panel strips,speaker that needs restored or just use hardware & cover w/PU speaker. That's what I was going to do before offering for sale.

[DeadheadNM]

Originally Posted by BLAZERMAN

I'm going to give you guys one more chance on these, I don't need them right now or I would jump on them! These are by far the best locking hubs made to replace the big Spicers...yes even better than the Warn 9072s that cost 300.00 They are period correct and if there here much longer they will be in my stash.
Posted via Mobile Device

Thanks Rob.

Originally Posted by special-K

Hey Pete, how about $100 plus a trade for that spare tire plate & Galles dealer ad tag? I have some other little Blazer stuff,too,like jack mount hardware,rear interior panel strips,speaker that needs restored or just use hardware & cover w/PU speaker. That's what I was going to do before offering for sale.

Tim I might do that - post up pics of the plate and tag when you can or I can PM an email address your way. Also, I could really use the little pieces that secure the hatch: these are metal pieces each with a small square piece of rubber if that make sense. The hubs are in real good condition. Thanks, Pete

[special-K]

Ok Pete. I'm trying to picture those catches(?). It's been a while since I've looked at that area on a K/5. I think I have those. I included a picture after the tag:

Here are pictures. The plate just needs paint to be perfect. The Galles tag is very presentable:

[special-K]

I didn't do a thing to those catches. That's very light rust...not crusty. I included pictures of other misc K/5 stuff in case you could use any of that. I have some black seatbelts,buckle holders (for non-CST bucket option),and visors,but yours has saddle interior,right? Do you need those plastic "plugs" & screws for under the wing vents?

[DeadheadNM]

Tim thanks for pics, yeah my K5 has a saddle interior. I'd go for the speaker too but I already have one that my Blazer doesn't need - came equipped with an in-dash speaker. BTW -your pic proves that GM had two types of under dash speaker brackets: with and without nutserts. Here's a pic of the Blazer top/hatch small parts I was describing. I'd be glad to work out a deal as you describe above. Let me know if you have these:

[special-K]

I'll look,but I'm thinking not. There is another can of parts out there from the Blazer. I just don't recall. I'll check. Oh,and thanks for accepting. I'll get back out there tomorrow.

The speaker just mounted with large phillips head bolts,I believe,but ,maybe they were hex heads.

[DeadheadNM]

Originally Posted by special-K

I'll look,but I'm thinking not. There is another can of parts out there from the Blazer. I just don't recall. I'll check. Oh,and thanks for accepting. I'll get back out there tomorrow.

The speaker just mounted with large phillips head bolts,I believe,but ,maybe they were hex heads.

Thanks - I'll start boxing up the hubs, you'll like them. Call it a deal as per above: $100 shipped plus spare tire plate and Galles dealer plate. Please let me know if you have those other hatch pieces I posted pics of. Anything else you need? There should be spare room in the flat rate box. 72 Aux tank decals or other aux tank parts? Big hub D44 Spicer parts?

[DeadheadNM]

Tim - Spare Spicer parts. I don't have a spare bushing (actuator seal....the thing that resembles a bearing race?) - I do have two each of the snap rings shown - a bolt/washer - an actuating cam - and a spare outer clutch gear as shown:

[special-K]

PM sent

[DeadheadNM]

Tim lost this bracket - can you help me out with it? PM sent. Thanks, Pete