KS Four Core & Three Core Rad. Mounts F/S - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Ironhorse** · 08-23-2013, 05:39 PM

One pair of 4 core upper rad mounts. No rubbers or nut plates but glass beaded, primed and painted semi-gloss black. $20 shipped

One pair of 2 & 3 core upper rad mounts. Nice rubber cushions with nut plates included. Glass beaded, primed and painted semi-gloss black. $ 25 shipped

Money order only, do not have a Paypal account. Please reply in thread.

88Ironduke · 08-23-2013, 10:34 PM

Silly question, what measurement would be needed to see if a radiator was a 3 or 4 core radiator? I need a set of these but the replacment radiator I got was free, but the PO didn't know 3 or 4 cores. If some one on here could tell me one way or the other I'll buy a set.

88Ironduke

**Ironhorse** · 08-23-2013, 10:48 PM

Since changing to a 4 core radiator I can get you those dimensions tomorrow but did not keep the 3 core as it was rotted out. Sold it for scrap. Surely someone has them, maybe check with your local parts house if they have a 3 core in stock?

Went to the shop and looked at my '71 4x4 radiator. Measured just the cores not the retainer ridges on the tanks. 4 core radiator mearures at 2 5/8 " thick. Alfter doing that I did a SEARCH from the board using "radiator diferances" and " radiator thickness " in the SEARCH window and found this from another member:
4 Core thickness = 2 5/8" 3 Core thickness = 2" 2 Core thickness = 1 1/4 "

The 2 and 3 core radiators use the same mounts while the 4 core radiator uses a mount all of it's own. Hope that is some help to you.

**Ironhorse** · 08-24-2013, 10:45 AM

ttt bump

88Ironduke · 08-24-2013, 02:06 PM

Thanks. I'll be heading to the shop tomorrow so I can get good measurements.

88

**Ironhorse** · 08-24-2013, 05:45 PM

88Ironduke, please re-read my previous post. My fingers don't always type what my brain is thinking, LOL.

The 2 core radiator is 1 1/4" thick.

HotRod C/10 · 08-24-2013, 05:56 PM

what are nut plates?

**Ironhorse** · 08-24-2013, 07:30 PM

Probably not the " correct " term for them but it's what I call them. The small tin plates with a mounting hole that fits the shroud end of the radiator support upper bracket. The shroud bolt/screw fits into it when mounting the radiator/shroud together. Two required, one for each upper rad support. Common to both sizes of rad mounts. Most likely could be had at a parts house or hardware store

Any body know what the real "true" name for them is, LOL

?

**Ironhorse** · 08-26-2013, 07:34 AM

a still have these bump

**Ironhorse** · 09-02-2013, 11:32 AM

ttt one last time

JimH2828 · 09-02-2013, 12:19 PM

I take the 4 cores for $20 shipped. PM me.

Thanks
Jim

**Ironhorse** · 09-02-2013, 01:19 PM

FOUR CORE mounts SOLD TO JimH2828 PM sent with payment info.

The 2 & 3 core rad. mounts still available.

**Ironhorse** · 09-06-2013, 06:40 PM

Payment received and 4 core upper mounts shipped. Thanks, JimH2828

2 & 3 core upper mounts with rubber cushions still available. Blasted, primed and painted $25 to your door.

08-23-2013, 05:39 PM	#1
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,285	Four Core & Three Core Rad. Mounts F/S One pair of 4 core upper rad mounts. No rubbers or nut plates but glass beaded, primed and painted semi-gloss black. $20 shipped One pair of 2 & 3 core upper rad mounts. Nice rubber cushions with nut plates included. Glass beaded, primed and painted semi-gloss black. $ 25 shipped Money order only, do not have a Paypal account. Please reply in thread. Attached Images __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

08-23-2013, 10:34 PM	#2
88Ironduke Registered User Join Date: Jul 2010 Location: Willingboro, NJ Posts: 489	Re: Four Core & Three Core Rad. Mounts F/S Silly question, what measurement would be needed to see if a radiator was a 3 or 4 core radiator? I need a set of these but the replacment radiator I got was free, but the PO didn't know 3 or 4 cores. If some one on here could tell me one way or the other I'll buy a set. 88Ironduke

08-23-2013, 10:48 PM	#3
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,285	Re: Four Core & Three Core Rad. Mounts F/S Since changing to a 4 core radiator I can get you those dimensions tomorrow but did not keep the 3 core as it was rotted out. Sold it for scrap. Surely someone has them, maybe check with your local parts house if they have a 3 core in stock? Went to the shop and looked at my '71 4x4 radiator. Measured just the cores not the retainer ridges on the tanks. 4 core radiator mearures at 2 5/8 " thick. Alfter doing that I did a SEARCH from the board using "radiator diferances" and " radiator thickness " in the SEARCH window and found this from another member: 4 Core thickness = 2 5/8" 3 Core thickness = 2" 2 Core thickness = 1 1/4 " The 2 and 3 core radiators use the same mounts while the 4 core radiator uses a mount all of it's own. Hope that is some help to you. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks Last edited by Ironhorse; 08-24-2013 at 05:44 PM. Reason: Added info

08-24-2013, 10:45 AM	#4
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,285	Re: Four Core & Three Core Rad. Mounts F/S ttt bump __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

08-24-2013, 02:06 PM	#5
88Ironduke Registered User Join Date: Jul 2010 Location: Willingboro, NJ Posts: 489	Re: Four Core & Three Core Rad. Mounts F/S Thanks. I'll be heading to the shop tomorrow so I can get good measurements. 88

08-24-2013, 05:45 PM	#6
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,285	Re: Four Core & Three Core Rad. Mounts F/S 88Ironduke, please re-read my previous post. My fingers don't always type what my brain is thinking, LOL. The 2 core radiator is 1 1/4" thick. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

08-24-2013, 05:56 PM	#7
HotRod C/10 Registered User Join Date: Feb 2012 Location: Albuquerque NM Posts: 3,053	Re: Four Core & Three Core Rad. Mounts F/S what are nut plates? __________________ SOLD -77 CHEYENNE SWB, LS SWAPPED -1976 SILVERADO YUBA GOLD/NEUTRAL (2-TONE)

08-24-2013, 07:30 PM	#8
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,285	Re: Four Core & Three Core Rad. Mounts F/S Probably not the " correct " term for them but it's what I call them. The small tin plates with a mounting hole that fits the shroud end of the radiator support upper bracket. The shroud bolt/screw fits into it when mounting the radiator/shroud together. Two required, one for each upper rad support. Common to both sizes of rad mounts. Most likely could be had at a parts house or hardware store Any body know what the real "true" name for them is, LOL ? __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

08-26-2013, 07:34 AM	#9
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,285	Re: Four Core & Three Core Rad. Mounts F/S a still have these bump __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

09-02-2013, 11:32 AM	#10
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,285	Re: Four Core & Three Core Rad. Mounts F/S ttt one last time __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

09-02-2013, 12:19 PM	#11
JimH2828 Registered User Join Date: Oct 2012 Location: Cumming GA Posts: 613	Re: Four Core & Three Core Rad. Mounts F/S I take the 4 cores for $20 shipped. PM me. Thanks Jim

09-02-2013, 01:19 PM	#12
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,285	Re: Four Core & Three Core Rad. Mounts F/S FOUR CORE mounts SOLD TO JimH2828 PM sent with payment info. The 2 & 3 core rad. mounts still available. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

09-06-2013, 06:40 PM	#13
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,285	Re: Four Core & Three Core Rad. Mounts F/S Payment received and 4 core upper mounts shipped. Thanks, JimH2828 2 & 3 core upper mounts with rubber cushions still available. Blasted, primed and painted $25 to your door. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.