67 SWB Poor kid build - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ZipZap · 08-25-2013, 05:16 PM

I got this truck when I was 16(im now 21) and it has been a money pit ever since, I have been trolling this fourm for a few years and have not made a post until now. I have this far done everything 100% by my self besides the paint.
Before i pulled it apart last june.

got my cab and fenders blasted

Got my porterbuilt stuff and 1/4 cheap manual valve stuff, I did not go all out on the suspension because I could simply not afford it.

I also attempted some metal/body work including most of the floor it did not come out to bad.

Got a boyd tank that fit 100% perfect!

I also built a mild 383 full roller, that im going to run with accels dfi fuel injection.

This is were im at right now, I have been having a bunch of wiring issues and motor is going on the dyno next sunday.

OEM radio I got at the local junkyard for 5$

C_Ruiz · 08-25-2013, 05:34 PM

That's great progress! I know exactly how you feel about simply not affording it. I'm actually trying to sell my 350/700R4 combo to get air management/suspension parts.
I'll worry about the vortec motor later.
Keep up the good work!
Posted via Mobile Device

Xeen · 08-25-2013, 05:54 PM

I know pictures can be decieving especialy from 15 feet but it looks like it was a nice truck to begin with.
I can't wait to see what it looks like when it's done.
Porterbuilt parts are expensive to say the least so don't feel too bad about skimping on your air management system because you damn near have to be rich to go first class on everything.

C_Ruiz · 08-25-2013, 05:56 PM

Oh yeah....what year vehicle are those seats out of?
Posted via Mobile Device

ZipZap · 08-25-2013, 06:36 PM

95-98 truck
Posted via Mobile Device

C_Ruiz · 08-25-2013, 06:38 PM

Quote:

Originally Posted by ZipZap

95-98 truck
Posted via Mobile Device

Pretty difficult to install? I've been looking at some Tahoe seats from an 04 but I'm unsure as to how difficult it would be? Appreciate your response.
Posted via Mobile Device

ZipZap · 08-25-2013, 08:38 PM

Easy, I just drilled some new holes, then welded some small square plate to run the bolts through to give them some more support.

C_Ruiz · 08-25-2013, 08:47 PM

Quote:

Originally Posted by ZipZap

Easy, I just drilled some new holes, then welded some small square plate to run the bolts through to give them some more support.

You, my friend, have just convinced me to find a set of seats! Subscribed!
Posted via Mobile Device

STOCKISH · 08-25-2013, 09:03 PM

Great progress. I like the look of things.

67_C-30 · 08-25-2013, 09:11 PM

I think your definition of poor is quite a bit different than mine! -lol

Great looking truck!

**lolife99** · 08-25-2013, 09:44 PM

Excellent, excellent, excellent.
Great build going on here,...

Hardesty454 · 08-26-2013, 12:35 AM

Looks pretty good for a poor kid build!
Posted via Mobile Device

darkhorse970 · 08-26-2013, 04:53 AM

Quote:

Originally Posted by 67_C-30

I think your definition of poor is quite a bit different than mine! -lol

Great looking truck!

I agree on both points. I am subscribed.
Posted via Mobile Device

ZipZap · 08-26-2013, 10:10 PM

I got my porterbuilt gas hood hinges in the mail today! Took me a few hours but they are on. Tommorow im going to set the hood down and get all my gaps were I want them, and then weld the brackets to the hood. And I put a nice big scratch in my firewall

ZipZap · 08-27-2013, 10:02 PM

Got the hood on today, I am 95% sure im not going to run the gas assist. I absolutly hate how low my hood sits when its open.

Pop's C-10 · 08-27-2013, 10:05 PM

beautiful truck..

ZipZap · 09-06-2013, 09:49 PM

Got the truck back on the ground today. I also got my slosh tubs today and got the motor dyno'd last weekend! I need the get my fuel map fine tuned but she sould be ready to roll.

Dingfodgy · 09-07-2013, 01:25 AM

Dayum! You've pretty much nailed it on the big stuff- nice job thus far! You got a color lined up yet?

ZipZap · 09-07-2013, 10:10 AM

Semi gloss black, I really want a color called moonrock metallic its a honda s2000 color. But i cant swing the cost of the paint, this truck has killed the bank account and forced me to live with my parents longer then expected lol.
Posted via Mobile Device

**67cheby** · 09-07-2013, 10:49 AM

Great looking build , nice work ! I dig those inner fenders !

HotRod C/10 · 09-07-2013, 02:38 PM

love the SANDERSON's......I sport a d-port set

BlackedOut67shorty · 09-07-2013, 04:37 PM

Man you getting me jelous lol. Loving the build.
Posted via Mobile Device

69short · 09-07-2013, 09:25 PM

Great looking build! Keep up the great work man!!

ZipZap · 09-07-2013, 09:43 PM

Thanks guys, I should have it running by friday. I just need to pick up a tranny cooler/fluid, rad hoses, throttle cable and radiator fan!
Posted via Mobile Device

ZipZap · 08-01-2014, 10:21 PM

Well one blown motor and tons of changes later its almost done, I really wanted to keep the thread updated but never could find the time, and being this is not not really a mobile friendly fourm I lost interest in posting my pics

Thanks for looking

08-25-2013, 05:16 PM	#1
ZipZap Registered User Join Date: Feb 2009 Location: wisconsin Posts: 18	67 SWB Poor kid build I got this truck when I was 16(im now 21) and it has been a money pit ever since, I have been trolling this fourm for a few years and have not made a post until now. I have this far done everything 100% by my self besides the paint. Before i pulled it apart last june. got my cab and fenders blasted Got my porterbuilt stuff and 1/4 cheap manual valve stuff, I did not go all out on the suspension because I could simply not afford it. I also attempted some metal/body work including most of the floor it did not come out to bad. Got a boyd tank that fit 100% perfect! I also built a mild 383 full roller, that im going to run with accels dfi fuel injection. This is were im at right now, I have been having a bunch of wiring issues and motor is going on the dyno next sunday. OEM radio I got at the local junkyard for 5$

08-25-2013, 05:34 PM	#2
C_Ruiz Registered User Join Date: Aug 2013 Location: 650-209-916 Posts: 92	Re: 67 SWB Poor kid build That's great progress! I know exactly how you feel about simply not affording it. I'm actually trying to sell my 350/700R4 combo to get air management/suspension parts. I'll worry about the vortec motor later. Keep up the good work! Posted via Mobile Device

08-25-2013, 05:54 PM	#3
Xeen Registered User Join Date: Aug 2012 Location: Topeka Kansas Posts: 2,655	Re: 67 SWB Poor kid build I know pictures can be decieving especialy from 15 feet but it looks like it was a nice truck to begin with. I can't wait to see what it looks like when it's done. Porterbuilt parts are expensive to say the least so don't feel too bad about skimping on your air management system because you damn near have to be rich to go first class on everything. __________________ Please call me Brian. Check out My 1972 SWB Fleetside 5.3L Vortec Restomod Build

08-25-2013, 05:56 PM	#4
C_Ruiz Registered User Join Date: Aug 2013 Location: 650-209-916 Posts: 92	Re: 67 SWB Poor kid build Oh yeah....what year vehicle are those seats out of? Posted via Mobile Device

08-25-2013, 06:36 PM	#5
ZipZap Registered User Join Date: Feb 2009 Location: wisconsin Posts: 18	Re: 67 SWB Poor kid build 95-98 truck Posted via Mobile Device

08-25-2013, 08:38 PM	#7
ZipZap Registered User Join Date: Feb 2009 Location: wisconsin Posts: 18	Re: 67 SWB Poor kid build Easy, I just drilled some new holes, then welded some small square plate to run the bolts through to give them some more support.

08-25-2013, 09:03 PM	#9
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: 67 SWB Poor kid build Great progress. I like the look of things. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

08-25-2013, 09:11 PM	#10
67_C-30 I have a radical idea! Join Date: Jan 2005 Location: Sweet Home Alabama! Posts: 6,513	Re: 67 SWB Poor kid build I think your definition of poor is quite a bit different than mine! -lol Great looking truck! __________________ '67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club!

08-25-2013, 09:44 PM	#11
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,701	Re: 67 SWB Poor kid build Excellent, excellent, excellent. Great build going on here,... __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

08-26-2013, 12:35 AM	#12
Hardesty454 Registered User Join Date: Feb 2011 Location: Riverbank, Ca Posts: 1,006	Re: 67 SWB Poor kid build Looks pretty good for a poor kid build! Posted via Mobile Device __________________ Rob 1971 c10 - ground up in progress Tripp's Speed Shop Build - http://67-72chevytrucks.com/vboard/s...d.php?t=589750

08-26-2013, 10:10 PM	#14
ZipZap Registered User Join Date: Feb 2009 Location: wisconsin Posts: 18	Re: 67 SWB Poor kid build I got my porterbuilt gas hood hinges in the mail today! Took me a few hours but they are on. Tommorow im going to set the hood down and get all my gaps were I want them, and then weld the brackets to the hood. And I put a nice big scratch in my firewall

08-27-2013, 10:02 PM	#15
ZipZap Registered User Join Date: Feb 2009 Location: wisconsin Posts: 18	Re: 67 SWB Poor kid build Got the hood on today, I am 95% sure im not going to run the gas assist. I absolutly hate how low my hood sits when its open.

08-27-2013, 10:05 PM	#16
Pop's C-10 Registered User Join Date: Jul 2010 Location: memphis Posts: 2,537	Re: 67 SWB Poor kid build beautiful truck.. __________________ 1981 C-10 (Pop's) 1978 Camaro 2006 Lacrosse

09-06-2013, 09:49 PM	#17
ZipZap Registered User Join Date: Feb 2009 Location: wisconsin Posts: 18	Re: 67 SWB Poor kid build Got the truck back on the ground today. I also got my slosh tubs today and got the motor dyno'd last weekend! I need the get my fuel map fine tuned but she sould be ready to roll. Last edited by ZipZap; 09-06-2013 at 10:05 PM.

09-07-2013, 01:25 AM	#18
Dingfodgy Lemme show you something!! Join Date: Apr 2007 Location: St.Helens, OR. Posts: 876	Re: 67 SWB Poor kid build Dayum! You've pretty much nailed it on the big stuff- nice job thus far! You got a color lined up yet? __________________ '67 CST-10 LWB ("Crusty") SOLD '67 GMC SWB ("Murdock") 2000 K1500 Suburban ("Betty") '95 BMW 325i ("Joy")



Register or Log In To remove these advertisements.

09-07-2013, 10:10 AM	#19
ZipZap Registered User Join Date: Feb 2009 Location: wisconsin Posts: 18	Re: 67 SWB Poor kid build Semi gloss black, I really want a color called moonrock metallic its a honda s2000 color. But i cant swing the cost of the paint, this truck has killed the bank account and forced me to live with my parents longer then expected lol. Posted via Mobile Device

09-07-2013, 10:49 AM	#20
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 SWB Poor kid build Great looking build , nice work ! I dig those inner fenders ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

09-07-2013, 02:38 PM	#21
HotRod C/10 Registered User Join Date: Feb 2012 Location: Albuquerque NM Posts: 3,053	Re: 67 SWB Poor kid build love the SANDERSON's......I sport a d-port set __________________ SOLD -77 CHEYENNE SWB, LS SWAPPED -1976 SILVERADO YUBA GOLD/NEUTRAL (2-TONE)

09-07-2013, 04:37 PM	#22
BlackedOut67shorty Registered User Join Date: Aug 2012 Location: error 404 location not found Posts: 816	Re: 67 SWB Poor kid build Man you getting me jelous lol. Loving the build. Posted via Mobile Device __________________ 1995 s10 blazer 4.3 1967 c10 350/350 fleet short 1993 s10 blazer 4.3l 4l60 RIP 6/20/14 2000 mercury sable Thats a how I roll

09-07-2013, 09:25 PM	#23
69short Registered User Join Date: May 2012 Location: DeKalb, MO Posts: 508	Re: 67 SWB Poor kid build Great looking build! Keep up the great work man!! __________________ -Justin '69 SWB \| Zoie Jane \| Porterbuilt, LQ9, 20"/22" wheels

09-07-2013, 09:43 PM	#24
ZipZap Registered User Join Date: Feb 2009 Location: wisconsin Posts: 18	Re: 67 SWB Poor kid build Thanks guys, I should have it running by friday. I just need to pick up a tranny cooler/fluid, rad hoses, throttle cable and radiator fan! Posted via Mobile Device

08-01-2014, 10:21 PM	#25
ZipZap Registered User Join Date: Feb 2009 Location: wisconsin Posts: 18	Re: 67 SWB Poor kid build Well one blown motor and tons of changes later its almost done, I really wanted to keep the thread updated but never could find the time, and being this is not not really a mobile friendly fourm I lost interest in posting my pics Thanks for looking Last edited by ZipZap; 08-01-2014 at 10:46 PM.

Register or Log In To remove these advertisements.