KS 1967 c10 lwb - The 1947 - Present Chevrolet & GMC Truck Message Board Network

nickv6266 · 08-29-2013, 10:39 PM

I have a 67 C10 that will be going to smasher before long. If i can get pics up i would like to give everybody a chance to pick it over before then.

Lower trim is all trashed
292 sold
4spd-$50
hood is fixable no dip just dinged up in front-$75
passenger door is rough
tailgate is sold
mirrors sold
grill trashed
Cab is descent asside from usual rust areas-$250

mainly just odds and ends if you can think of something let me know
Its on wichita craigslist auto parts in Kansas. Will try to get pics up soon Thanks

Juarez823 · 08-30-2013, 02:28 AM

How much for seatbelts?
Posted via Mobile Device

nickv6266 · 08-30-2013, 02:52 AM

Quote:

Originally Posted by Juarez823

How much for seatbelts?
Posted via Mobile Device

How about $60 shipped

olblue60@aol.com · 08-30-2013, 05:35 AM

right fender?

nobolt · 08-30-2013, 05:42 AM

how is the passenger fender? actually....I could use the front of both fenders for a wall project. how are the cups and what would you want for them?

**Elliot949** · 08-30-2013, 05:47 AM

what differential is in it... is it a posi rearend?... I am in Winfield... PM sent

Maddoxdb · 08-30-2013, 08:04 AM

How much for glovebox door, hubcaps, ignition bezel, and do you have the original wheel and horn button? Looks like the wheel laying on the seat.
Posted via Mobile Device

nickv6266 · 08-30-2013, 11:38 PM

pics coming hopefully

nickv6266 · 08-31-2013, 12:38 AM

Quote:

Originally Posted by olblue60@aol.com

right fender?

Both fenders are rusted in cups

Quote:

Originally Posted by nobolt

how is the passenger fender? actually....I could use the front of both fenders for a wall project. how are the cups and what would you want for them?

Fenders are rusted in cups and lower rear

Quote:

Originally Posted by Elliot949

what differential is in it... is it a posi rearend?... I am in Winfield... PM sent

Not a posi not sure what gears are in it

Quote:

Originally Posted by Maddoxdb

How much for glovebox door, hubcaps, ignition bezel, and do you have the original wheel and horn button? Looks like the wheel laying on the seat.
Posted via Mobile Device

hubcaps are no good, original wheel and horn button I need to check what kind of shape they are in. $25 shipped on glovebox door, $75 shipped on wheel and button and ill throw in ignition bezel if I can get it off.

Maddoxdb · 08-31-2013, 01:01 AM

I will take the glovebox door
http://67-72chevytrucks.com/vboard/s...acing+ignition
Here's a thread showing removal of bezel. Still interested in steering wheel. Thanks, Dustin.
Posted via Mobile Device

71GeneralMotorsCorp · 08-31-2013, 01:37 AM

What would you take for what is left? and what is left? PM me please!

**ScottH** · 08-31-2013, 09:09 AM

Interested in door arm rests pending pics

Maddoxdb · 08-31-2013, 09:28 AM

I could also use the visor clips. Thanks, Dustin
Posted via Mobile Device

6.0 1955 · 08-31-2013, 10:02 AM

I need the metal clip that holds the metal throttle rod into the metal pedal rod. The clip is round on one side and clamps over rod on other side. Let me know. Thanks
Posted via Mobile Device

angelo_32806 · 08-31-2013, 10:16 AM

do you have a title

nickv6266 · 08-31-2013, 11:12 PM

Quote:

Originally Posted by ScottH

Interested in door arm rests pending pics

armrests were gone when I got truck sorry.

Quote:

Originally Posted by Maddoxdb

I could also use the visor clips. Thanks, Dustin
Posted via Mobile Device

Visor clips one is black other is a gray or pewter color does that matter?

Quote:

Originally Posted by 6.0 1955

I need the metal clip that holds the metal throttle rod into the metal pedal rod. The clip is round on one side and clamps over rod on other side. Let me know. Thanks
Posted via Mobile Device

Clip $15 shipped?

Quote:

Originally Posted by angelo_32806

do you have a title

No title

kingsolver72 · 09-01-2013, 01:56 AM

Do you have the front hub dust covers?
Posted via Mobile Device

nickv6266 · 09-01-2013, 02:48 AM

Quote:

Originally Posted by kingsolver72

Do you have the front hub dust covers?
Posted via Mobile Device

I'm sure it does let me double check for you. Thanks
Posted via Mobile Device

dibbleg · 09-01-2013, 04:44 AM

spare tire carrier and hardware under bed and heater controls? shipped to 20794

nickv6266 · 09-02-2013, 02:06 AM

Sorry everybody I will catch things up on this thread in a day or so, We have been taking care of infant daughter with the flu. Not much time on my hands

kingsolver72 · 09-02-2013, 01:22 PM

No worries for me. Take care of your baby.
Posted via Mobile Device

nickv6266 · 09-02-2013, 02:58 PM

Quote:

Originally Posted by kingsolver72

Do you have the front hub dust covers?
Posted via Mobile Device

Dust covers are dinged up

Quote:

Originally Posted by dibbleg

spare tire carrier and hardware under bed and heater controls? shipped to 20794

Spare tire carrier is gone sorry
Posted via Mobile Device

1965Impala · 09-03-2013, 05:26 PM

Bench seat with tilt back?

kmaz · 09-10-2013, 06:04 AM

How much for the hood to get shipped to MA 01862? Could you send pics?
Posted via Mobile Device

olblue60@aol.com · 09-10-2013, 08:29 AM

Is there a driver door?

08-29-2013, 10:39 PM	#1
nickv6266 Registered User Join Date: May 2008 Location: Arkansas city Kansas Posts: 398	1967 c10 lwb I have a 67 C10 that will be going to smasher before long. If i can get pics up i would like to give everybody a chance to pick it over before then. Lower trim is all trashed 292 sold 4spd-$50 hood is fixable no dip just dinged up in front-$75 passenger door is rough tailgate is sold mirrors sold grill trashed Cab is descent asside from usual rust areas-$250 mainly just odds and ends if you can think of something let me know Its on wichita craigslist auto parts in Kansas. Will try to get pics up soon Thanks

08-30-2013, 02:28 AM	#2
Juarez823 Registered User Join Date: Mar 2011 Location: Corvallis, Or Posts: 78	Re: 1967 c10 lwb How much for seatbelts? Posted via Mobile Device

08-30-2013, 05:35 AM	#4
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Re: 1967 c10 lwb right fender? __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide

08-30-2013, 05:42 AM	#5
nobolt Registered User Join Date: Oct 2011 Location: Algonac, MI 48001 Posts: 1,848	Re: 1967 c10 lwb how is the passenger fender? actually....I could use the front of both fenders for a wall project. how are the cups and what would you want for them? __________________ Dave "... government even in its best state is but a necessary evil. Thomas Paine "It wasn't a lie, it was ineptitude with insufficient cover." Donald Draper (Mad Men) Last edited by nobolt; 08-30-2013 at 05:49 AM.

08-30-2013, 05:47 AM	#6
Elliot949 Registered User Join Date: Sep 2010 Location: Winfield, Ks. Posts: 4,162	Re: 1967 c10 lwb what differential is in it... is it a posi rearend?... I am in Winfield... PM sent Last edited by Elliot949; 08-30-2013 at 05:58 AM.

08-30-2013, 08:04 AM	#7
Maddoxdb Registered User Join Date: Jun 2011 Location: Elk city ok Posts: 891	Re: 1967 c10 lwb How much for glovebox door, hubcaps, ignition bezel, and do you have the original wheel and horn button? Looks like the wheel laying on the seat. Posted via Mobile Device

08-30-2013, 11:38 PM	#8
nickv6266 Registered User Join Date: May 2008 Location: Arkansas city Kansas Posts: 398	Re: 1967 c10 lwb pics coming hopefully

08-31-2013, 01:01 AM	#10
Maddoxdb Registered User Join Date: Jun 2011 Location: Elk city ok Posts: 891	Re: 1967 c10 lwb I will take the glovebox door http://67-72chevytrucks.com/vboard/s...acing+ignition Here's a thread showing removal of bezel. Still interested in steering wheel. Thanks, Dustin. Posted via Mobile Device

08-31-2013, 01:37 AM	#11
71GeneralMotorsCorp Registered User Join Date: Jul 2011 Location: Kansas Posts: 266	Re: 1967 c10 lwb What would you take for what is left? and what is left? PM me please! __________________ "Repetition penetrates even the dullest of minds"

08-31-2013, 09:09 AM	#12
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: 1967 c10 lwb Interested in door arm rests pending pics __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

08-31-2013, 09:28 AM	#13
Maddoxdb Registered User Join Date: Jun 2011 Location: Elk city ok Posts: 891	Re: 1967 c10 lwb I could also use the visor clips. Thanks, Dustin Posted via Mobile Device

08-31-2013, 10:02 AM	#14
6.0 1955 Registered User Join Date: Jul 2011 Location: Ashland, KY Posts: 91	Re: 1967 c10 lwb I need the metal clip that holds the metal throttle rod into the metal pedal rod. The clip is round on one side and clamps over rod on other side. Let me know. Thanks Posted via Mobile Device

08-31-2013, 10:16 AM	#15
angelo_32806 Registered User Join Date: May 2009 Location: Orlando FL Posts: 107	Re: 1967 c10 lwb do you have a title

09-01-2013, 01:56 AM	#17
kingsolver72 10/30/19 Join Date: Aug 2004 Location: ottawa kansas Posts: 5,244	Re: 1967 c10 lwb Do you have the front hub dust covers? Posted via Mobile Device __________________ Fight the good fight, finish the race, keep the faith

09-01-2013, 04:44 AM	#19
dibbleg Registered User Join Date: Jun 2010 Location: MD Posts: 55	Re: 1967 c10 lwb spare tire carrier and hardware under bed and heater controls? shipped to 20794 __________________ Chris Mead Tattoos



Register or Log In To remove these advertisements.

09-02-2013, 02:06 AM	#20
nickv6266 Registered User Join Date: May 2008 Location: Arkansas city Kansas Posts: 398	Re: 1967 c10 lwb Sorry everybody I will catch things up on this thread in a day or so, We have been taking care of infant daughter with the flu. Not much time on my hands

09-02-2013, 01:22 PM	#21
kingsolver72 10/30/19 Join Date: Aug 2004 Location: ottawa kansas Posts: 5,244	Re: 1967 c10 lwb No worries for me. Take care of your baby. Posted via Mobile Device __________________ Fight the good fight, finish the race, keep the faith

09-03-2013, 05:26 PM	#23
1965Impala Registered User Join Date: Feb 2013 Location: Allen, TX Posts: 20	Re: 1967 c10 lwb Bench seat with tilt back?

09-10-2013, 06:04 AM	#24
kmaz Registered User Join Date: Sep 2013 Location: Billerica Ma Posts: 16	Re: 1967 c10 lwb How much for the hood to get shipped to MA 01862? Could you send pics? Posted via Mobile Device

09-10-2013, 08:29 AM	#25
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Re: 1967 c10 lwb Is there a driver door? __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide

Register or Log In To remove these advertisements.