Bought a house, It's all gotta go! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*boytoytrading* · 07-07-2003, 12:11 AM

I just bought a house, I have 1 month to sell everything off. After I get settled, I'll restock, but for now, here it goes;

2, 1972 Burb's for $2000. 1st one is a 4x4 that was rolled over, It has new carpet, new headliner, and is also factory ac,pb,ps. It has a good running 350 with a little over 90,000 mile's on it.
This include's another 72 Burb, which has no motor or tranny. Body has a little rust above the rear wheel well's, and along the bottom rear q-panel's. rust is really not to bad. These two burb's will sell together, I can not or will not part out either burb.

I have a 71 Chevy cheyene that has factory ac,pb,ps. Motor sold, but still has the auto tranny. Truck has a good bed which has a straight tailgate, and the built in tool box on the side. This truck is complete minus the motor, I will part out or sell whole, $600. complete, or $300 cab. $250 bed. $250 front clip. $200 Rolling coil 5 lug chassis.

I have a 68 GMC that has no motor or tranny. The cab is in good shape with rust in the rocker panel's, nothing major, $200. The bed is in great shape, no rust, 1 small dent, no gate, $200. Front clip as far as fender's is no good. I have the hood which is great $75. Grill is nearly flawless, very nice! $150.

In addition, I have 1 more AC cab. It has rust in p-side corner and rocker, d-side has rust in rocker only. Also has good front clip, Fender's are good, no rust or dent's $400 for all, or clip is $300, and cab $300. Bed is nice on p-side, not so nice d-side $50.

These cab's sold without door's, I will sell the door's for aditional $50 if you buy a cab, or I will sell the door's seperate $125 each.

2- 205 transfer cases with the granny low 4 speed tranny's, $175 per set.

Please call or e-mail me if you need anything else, I have ton's of smaller Item's that I didnt mention, ie; visor's, door panel's, seat's, emblum's, ect.

E-mail Jim at boytoytrading@yahoo.com
Or call #719-205-5647.

ozarkhippie · 07-07-2003, 12:25 AM

How much will you charge to deliver the 71 to Eureka Springs AR.

*boytoytrading* · 07-07-2003, 12:43 AM

Well, as far as I figure It's close to 1200 miles one way. Let's see (tol) gas would cost me, ooooooo$900. Better make him a deal, ummmm, Ok, how's $450. sound? That would be a total of $1,050.

teeitup · 07-07-2003, 07:15 AM

I thought the 2 burbs weren't yours?

*boytoytrading* · 07-07-2003, 09:16 AM

Well, seeing that they were'nt moving, he made me a pretty good deal on them.

GreenMystChevy · 07-07-2003, 04:08 PM

You wouldn't happen to have 3/4 ton 4x4 axles with front disc brakes for cheap? Holding my breath....

*boytoytrading* · 07-07-2003, 04:49 PM

No sir, I only have a 2wd 3/4 ton, and a 1/2 ton 4x4. We kinda went through the middle on that one.

teeitup · 07-07-2003, 04:55 PM

Can or would you trade now?

*boytoytrading* · 07-07-2003, 08:40 PM

Not really, I kinda need the cash to get into the house, But after the smoke clear's, and if I still have them, then maybe.

*boytoytrading* · 07-09-2003, 01:54 AM

ttt

*boytoytrading* · 07-14-2003, 12:41 AM

I've still got a lot of this stuff, including a nice LWB bed with a really nice GMC tailgate. $250

Wabash · 07-14-2003, 01:28 AM

do you have any door panels out of a 68 chevy, 68 armrests, 68 front marker lights that go in the grille??
anything like that??
let me know

07-07-2003, 12:11 AM	#1
boytoytrading Account Suspended Join Date: May 2003 Location: Base of Pikes Peak, Colorado Springs Co Posts: 376	Bought a house, It's all gotta go! I just bought a house, I have 1 month to sell everything off. After I get settled, I'll restock, but for now, here it goes; 2, 1972 Burb's for $2000. 1st one is a 4x4 that was rolled over, It has new carpet, new headliner, and is also factory ac,pb,ps. It has a good running 350 with a little over 90,000 mile's on it. This include's another 72 Burb, which has no motor or tranny. Body has a little rust above the rear wheel well's, and along the bottom rear q-panel's. rust is really not to bad. These two burb's will sell together, I can not or will not part out either burb. I have a 71 Chevy cheyene that has factory ac,pb,ps. Motor sold, but still has the auto tranny. Truck has a good bed which has a straight tailgate, and the built in tool box on the side. This truck is complete minus the motor, I will part out or sell whole, $600. complete, or $300 cab. $250 bed. $250 front clip. $200 Rolling coil 5 lug chassis. I have a 68 GMC that has no motor or tranny. The cab is in good shape with rust in the rocker panel's, nothing major, $200. The bed is in great shape, no rust, 1 small dent, no gate, $200. Front clip as far as fender's is no good. I have the hood which is great $75. Grill is nearly flawless, very nice! $150. In addition, I have 1 more AC cab. It has rust in p-side corner and rocker, d-side has rust in rocker only. Also has good front clip, Fender's are good, no rust or dent's $400 for all, or clip is $300, and cab $300. Bed is nice on p-side, not so nice d-side $50. These cab's sold without door's, I will sell the door's for aditional $50 if you buy a cab, or I will sell the door's seperate $125 each. 2- 205 transfer cases with the granny low 4 speed tranny's, $175 per set. Please call or e-mail me if you need anything else, I have ton's of smaller Item's that I didnt mention, ie; visor's, door panel's, seat's, emblum's, ect. E-mail Jim at boytoytrading@yahoo.com Or call #719-205-5647.

07-07-2003, 12:25 AM	#2
ozarkhippie Registered User Join Date: Nov 2002 Location: Eureka Springs AR Posts: 494	How much will you charge to deliver the 71 to Eureka Springs AR. __________________ Buy Sale or Trade 71 3/4 4x4 72 1/2 ton cheyenne 4x4

07-07-2003, 12:43 AM	#3
boytoytrading Account Suspended Join Date: May 2003 Location: Base of Pikes Peak, Colorado Springs Co Posts: 376	Delivery Well, as far as I figure It's close to 1200 miles one way. Let's see (tol) gas would cost me, ooooooo$900. Better make him a deal, ummmm, Ok, how's $450. sound? That would be a total of $1,050. Attached Images

07-07-2003, 07:15 AM	#4
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	I thought the 2 burbs weren't yours? __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-07-2003, 09:16 AM	#5
boytoytrading Account Suspended Join Date: May 2003 Location: Base of Pikes Peak, Colorado Springs Co Posts: 376	Burb's Well, seeing that they were'nt moving, he made me a pretty good deal on them.

07-07-2003, 04:08 PM	#6
GreenMystChevy Registered User Join Date: Jan 2002 Location: Woodinville, WA Posts: 513	You wouldn't happen to have 3/4 ton 4x4 axles with front disc brakes for cheap? Holding my breath.... __________________ Jeremy '71 C-10 '72 GMC K2500 '72 Nova (Dad's) '70 Chevelle SS '55 Sedan Delivery Attempting to build up this here 4x4...make her real tall and purty...well, maybe just tall

07-07-2003, 04:49 PM	#7
boytoytrading Account Suspended Join Date: May 2003 Location: Base of Pikes Peak, Colorado Springs Co Posts: 376	Sorry, No sir, I only have a 2wd 3/4 ton, and a 1/2 ton 4x4. We kinda went through the middle on that one.

07-07-2003, 04:55 PM	#8
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Can or would you trade now? __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-07-2003, 08:40 PM	#9
boytoytrading Account Suspended Join Date: May 2003 Location: Base of Pikes Peak, Colorado Springs Co Posts: 376	Hummm Not really, I kinda need the cash to get into the house, But after the smoke clear's, and if I still have them, then maybe.

07-09-2003, 01:54 AM	#10
boytoytrading Account Suspended Join Date: May 2003 Location: Base of Pikes Peak, Colorado Springs Co Posts: 376	ttt ttt

07-14-2003, 12:41 AM	#11
boytoytrading Account Suspended Join Date: May 2003 Location: Base of Pikes Peak, Colorado Springs Co Posts: 376	Still here I've still got a lot of this stuff, including a nice LWB bed with a really nice GMC tailgate. $250

07-14-2003, 01:28 AM	#12
Wabash Registered User Join Date: Apr 2001 Location: Alberta, Canada Posts: 534	do you have any door panels out of a 68 chevy, 68 armrests, 68 front marker lights that go in the grille?? anything like that?? let me know __________________ 1972 C/10 LWB 1972 K/5 Blazer



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.