CA Rockwell T-221 Divorced Transfer Case

[argonaut]

Need to clear up some space in the old garage. I've got a T-221 transfer case from a 66 K10. I resealed and gasketed it last year in anticipation of using it in my 66 K10 project "Big Ugly" but instead went with an NP205.
Its in good condition. Has some surface rust as it sat outside here in so cal for about a month when i was in the process of moving earlier this year. It comes complete with shifter and bracket to mount onto SM420, shifter rod, lever arm and clevises.
Asking $150 obo. Hoping to send it to a good home to someone who can use it.
Let me know!

Before the re-seal.





During the inspectio and re-seal.





Back on the chassis before getting swapped for the np205.

[gmc 2500 4x4]

where did you get gaskets?

[argonaut]

I cut and punched them all myself from felpro sheet gasket material.

[gmc 2500 4x4]

i thought so, dont think gaskets are avail. any more. thanx, paul

[MitchFloyd]

I'd buy it if shipping wasn't way over the top. ship zip 74437

[61K10]

Hay Mitch--would be great to have a spare. I have to do the same to mine, looks like it's been apart also. shipping to 95667 N ca? hate to see it go to the steel mill.

[argonaut]

Hey guys, thanks for your interest. To be honest I haven't shipped something this heavy before. IF you have can you suggest a good method? I can explore UPS freight if you are interested. Might need to strap this to a small pallet or build a small wood framed box.

[JPBrecheisen]

I've had gearboxes picked up freight before when I bought them and had them sent off for rebuild.

I forget what it cost me, but freight is going to be most likely your cheapest route on a unit that heavy.

If nobody takes this one, I'm interested as well.

Jonathon

[61K10]

still have it? i am in north cal. you could ship fed-x, thats who brought my crate eng to my house. i am interested if you can ship to 95667 placerville ca will give you $150 + shipping.

[argonaut]

Sorry guys, got busy with work and neglected you! MitchFloyd passed so 61K10 it is all yours. I will look into shipping via FedEx as you suggested and get back to you.

[61K10]

jason--could you hold off a few days--going to pull mine apart and see how bad it is. + i well be gone for 2 weeks (no computer sig) sorry kinda got ahead of myself.
thanks------------- kimble

[61K10]

back again--mine is pretty worn and 2 of the yokes are damaged from u-joint breaking. will keep for parts i guess. so let me know--back in the want for sure.

my E-mail add is husaberg@gmail.com

thanks------kimble

[61K10]

Jason------don't mean to be a pest about the T/C any news about shipping? sold it? need to rebuild mine if so.

thanks---------Kimble

[argonaut]

Kimble,
Haven't sold it, saving it for you. I didnt get it crated last weekend because I had an emergency with my dog.
One other option I can offer you is that I'll be in merced tuesday next week if you wanted to drive down and grab it. Its far but might be cheaper than shipping. Anyway I weighed it last week so I'll make some calls on freight this week.
Sorry for the delays.

[argonaut]

SOLD to 61K10