needing a good bedside.... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*gmachinz* · 10-09-2013, 12:27 AM

Well, I can't seem to find an aftermarket supplier for a RH bedside for a 78-up shortbox with an aux. gas door so....does anybody have a lead on where to find one? Anybody have one laying around? I'd grab a complete box if I have too.

tucsonjwt · 10-09-2013, 04:55 AM

Fleetside or Stepside?

*gmachinz* · 10-09-2013, 09:36 AM

I'm needing one for a fleetside-I'm going to be needing the crossover fuel lines and related wiring from my 79 K20 parts truck so I have everything I need as far as that is concerned.....just need the boxside itself mainly-the PO mated a single tank shortbox on a 2WD cab setup for dual tanks so I need to make it right.

If it isn't too far I'd almost prefer to just pick up a clean rust free fleetside dual tank shortbox but I don't think I'll find one around here.

RandyP · 10-09-2013, 01:03 PM

Have a Keystone or LKQ (salvage chain)? Auto Panels Plus?

BONUSCAB · 10-09-2013, 03:20 PM

Doug's 4-wheelers
1211 hwy. 163
Pella, iowa 50219

07XCSBZ71 · 10-09-2013, 09:53 PM

Anybody that sell Sherman parts. They offer a a repopped RH bed side with the fuel door for 546.26 or you can find them at Shermanparts.com

10-09-2013, 12:27 AM	#1
gmachinz Account Suspended Join Date: Jun 2011 Location: Des Moines, IA. Posts: 4,143	needing a good bedside.... Well, I can't seem to find an aftermarket supplier for a RH bedside for a 78-up shortbox with an aux. gas door so....does anybody have a lead on where to find one? Anybody have one laying around? I'd grab a complete box if I have too.

10-09-2013, 04:55 AM	#2
tucsonjwt Registered User Join Date: Jul 2007 Location: Tucson, AZ Posts: 3,189	Re: needing a good bedside.... Fleetside or Stepside?

10-09-2013, 09:36 AM	#3
gmachinz Account Suspended Join Date: Jun 2011 Location: Des Moines, IA. Posts: 4,143	Re: needing a good bedside.... I'm needing one for a fleetside-I'm going to be needing the crossover fuel lines and related wiring from my 79 K20 parts truck so I have everything I need as far as that is concerned.....just need the boxside itself mainly-the PO mated a single tank shortbox on a 2WD cab setup for dual tanks so I need to make it right. If it isn't too far I'd almost prefer to just pick up a clean rust free fleetside dual tank shortbox but I don't think I'll find one around here.

10-09-2013, 01:03 PM	#4
RandyP Getting Old; Going Broke Join Date: Apr 2010 Location: Owasso OK Posts: 2,764	Re: needing a good bedside.... Have a Keystone or LKQ (salvage chain)? Auto Panels Plus? Attached Images __________________ *Why is every used 350 sbc out of a corvette?* There's only two things that excite a man, expensive toys and real expensive toys. *VEGETARIAN: That's an old Indian word meaning "I don't hunt so good."* When the going gets tough, switch to power tools.

10-09-2013, 03:20 PM	#5
BONUSCAB Registered User Join Date: Jan 2013 Location: east troy, WI Posts: 341	Re: needing a good bedside.... Doug's 4-wheelers 1211 hwy. 163 Pella, iowa 50219 __________________ Few things in life will make you look stupider than putting a dollar sign after a number.

10-09-2013, 09:53 PM	#6
07XCSBZ71 Registered User Join Date: Apr 2012 Location: Murphy,NC Posts: 212	Re: needing a good bedside.... Anybody that sell Sherman parts. They offer a a repopped RH bed side with the fuel door for 546.26 or you can find them at Shermanparts.com



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.