|
11-09-2013, 02:42 AM
|
#1 |
|
Registered User
Join Date: Apr 2003
Location: Stilwell, OK
Posts: 83
|
spread port headers?
I'm in the process of building a 18 degree engine and I will need headers for it does anyone know of some that will fit?
__________________
Justin weight 3480 with driver 1.35 60ft 6.13@111mph 1/8 mile 9.80@131mph 1/4 mile 434 small block all motor |
|
|
|
11-16-2013, 07:21 PM
|
#2 |
|
Mean Green
Join Date: Sep 2007
Location: Portland, OR
Posts: 522
|
Re: spread port headers?
I'm in the same boat. I bought some adapters off eBay
Until i can find a set. Man your truck is really gonna fly with that set up.
__________________
427 SBC 683HP & 590ftlbsTRQ @ fly wheel. 60'-1.38 1/4-10.43 MPH-124.6 New ET current 4/2019 AKA MEAN GREEN. |
|
|
|
|
11-16-2013, 09:10 PM
|
#3 |
|
Registered Truck Offender
Join Date: May 2008
Location: hells training ground (aka Ariz)
Posts: 3,118
|
Re: spread port headers?
Headman has a set of build your own / adapters. Or Lemons will fix you right up for around $1000
I fought the issue and ended up 'attempting' to build my own, then I went to someone that knew what they were doing to build me a set of custom headers. Ended up about the same as a set of Lemons after coating and all. Sorry, know of no 'good' solutions other than having someone build a set to git.
__________________
Still playin with trucks, even at my age! When you're dead, it's only a problem for the people around you, because you don't know you're dead. .....It's kinda the same when your STUPID. I just did my taxes and reviewed my SS statement. Thanks to the current administration it looks like I will only have to work till noon on the day of my funeral. |
|
|
|
|
11-16-2013, 09:42 PM
|
#4 |
|
Senior Member
Join Date: Apr 2000
Location: Delta,Pa
Posts: 14,948
|
Re: spread port headers?
Yup it wont be cheap. Whichever way you go. If you have the ability get a kit and build your own. I assume though since your asking for a solution building your own isn't in the cards. Have a set built. It will cost you a grand or so but they will fit perfect.
__________________
Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member. |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
