|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
11-13-2013, 11:34 AM
|
#1 |
|
Registered User
Join Date: Aug 2009
Location: Phoenix, AZ
Posts: 159
|
Screw Sizes: Tailgate Handle/Latch
Hey there guys, so I am starting to put everything back together again after getting the truck back from paint, need a little assistance on screw sizes.
I don't have the original screws for the tailgate handle or the tailgate latches, or yes I would have went and bought new ones and just compared the sizes. Can anyone shed some light on the size screws needed. 3 for the tailgate handle 4 needed for the tailgate latches
__________________
1972 C10 LWB Cheyenne Super  God Said,"Owning A 10 Second Import Is Like Coming Out Of The Closet, In The End Ur Still Gay" ........................__ ..........._______ |__\__ ..........|__(O)______(O)] |
|
|
|
11-13-2013, 11:42 AM
|
#2 |
|
Registered User
Join Date: Aug 2009
Location: Phoenix, AZ
Posts: 159
|
Re: Screw Sizes: Tailgate Handle/Latch
And for those of you wondering how the paint turned out...
__________________
1972 C10 LWB Cheyenne Super God Said,"Owning A 10 Second Import Is Like Coming Out Of The Closet, In The End Ur Still Gay" ........................__ ..........._______ |__\__ ..........|__(O)______(O)] |
|
|
|
|
11-13-2013, 01:18 PM
|
#3 |
|
Senior Member
 
Join Date: May 2010
Location: Wisconsin & Arizona
Posts: 4,852
|
Re: Screw Sizes: Tailgate Handle/Latch
I just did this a month ago. As I recall they are 5/16" course thread just like many others on the truck. Inner fenders are a good example. My 69 were hex head with captured washers, but others (perhaps a year difference) were pan head phillips. I took some pictures last year in Phoenix of 2 beds that were taken off trucks when they were new. One was a 68 the other a 71 or 72. One had phillips and the other had hex. I think it was the 71/72 that had phillips.
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
