French lake auto parts mn - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1968k10blue · 11-14-2013, 02:50 PM

I recently went to French Lake Auto Parts near St.Cloud MN and found these diamonds in the rough there, they are all long bed fleets and 1 blazer with top hopefully I will be going back out there soon to pick up parts for myself but if anyone would be interested in me looking for a part for you guys I can do that for you

**bigmac73** · 11-14-2013, 03:04 PM

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any [URL="http://67-72chevytrucks.

71K20chevy · 11-14-2013, 03:05 PM

Well, it could easily spend a few days going through that joint...

1968k10blue · 11-14-2013, 03:07 PM

I will take a look, I am not sure when I will be going up, just remember that it will also cost shipping too if I do go. It is a good distance out of my way, about an hour and a half and their hours dont really work too well in my favor. so if you are willing to wait a little while I will check it out and see if they have anything there for you

**Ol Blue K20** · 11-14-2013, 03:09 PM

That's where all of the parts trucks hide....

1968k10blue · 11-14-2013, 03:12 PM

yep, this place was huge, look it up online and see what they show you on their map, I took 3 hours and walked around there and only had time to skim past about half the vihicles there. if you notice too there were a few 60-66 there too, you can see the bed on the right of the picture. they keep this place surprisingly organized too, i did see two other of this year range but one was a blazer and for sale as a whole i think, and the other was a 67 flat bed

budnikguy · 11-14-2013, 03:16 PM

gold mine!!!

1968k10blue · 11-14-2013, 03:17 PM

heres another cool one

**bigmac73** · 11-14-2013, 03:24 PM

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any [URL="http://67-72chevytrucks.

1968k10blue · 11-14-2013, 03:27 PM

alright i will look, at least a few of them still had complete engines still on them, so my guess if any of them had power brakes they would still be there. almost every single truck there was near complete

matt_field · 11-14-2013, 03:37 PM

any gmc pass fenders or that 68 pass fender rust free?

1968k10blue · 11-14-2013, 04:13 PM

I have no idea what it looks like, that picture above is all I have to reference right now

72bowtiestepper · 11-14-2013, 04:26 PM

Man...I wish there boneyards in NJ like that.....a goldmine for sure !!

Mr Chevorlet · 11-14-2013, 04:42 PM

All i can say is, WOW!

mrein3 · 11-14-2013, 10:03 PM

The next time you go, if you take highway 12, you pass within 1 mile of da-burb's house. He runs Bowtie Truck Stop, Inc. out of his barn out there. If you need any new things like rockers, etc., and you want to save on shipping costs, call him ahead of time and see if he can line it up for you.

Not only is he a fellow board member, he is a heck of a nice guy too.

1968k10blue · 11-14-2013, 11:47 PM

Awesome! I will have to pm him and see, I will be going back out there on black Friday to get some parts for my self. Heck even if I don't need anything from him I may want to drop by and say hi!

**70STOVEBOLT** · 11-15-2013, 02:58 PM

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any [URL="http://67-72chevytrucks.

1968k10blue · 11-15-2013, 04:06 PM

I will add that to my list!

**425HP409** · 11-15-2013, 10:45 PM

I have bought parts for several different models of cars from them and they are real good people. Minnesota to Texas, looking good.....

**bigmac73** · 12-03-2013, 07:45 PM

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any [URL="http://67-72chevytrucks.

**70cst** · 12-03-2013, 09:26 PM

Guys ... this is not a Want To Buy thread so please keep this thread as it was meant to be. Thanks

1968k10blue · 12-04-2013, 02:15 AM

Quote:

Originally Posted by 70cst

Guys ... this is not a Want To Buy thread so please keep this thread as it was meant to be. Thanks

Sorry, didn't mean to make a want to buy, just simply wanted to share an awesome parts yard and see if there was anything anyone wanted me to search for while I was there, I will have to stick with pms I guess, thanks for not locking the thread!

**70cst** · 12-04-2013, 01:09 PM

Quote:

Originally Posted by 1968k10blue

Sorry, didn't mean to make a want to buy, just simply wanted to share an awesome parts yard and see if there was anything anyone wanted me to search for while I was there, I will have to stick with pms I guess, thanks for not locking the thread!

All is well...

The thread is good but sometimes temptation overcomes us

**D.PASSMORE** · 12-04-2013, 05:46 PM

While your there, look for any trucks with this marking - deluxe centered below CUSTOM /10 or 20.

See this link, it been a topic of discussion for a while:

http://67-72chevytrucks.com/vboard/s...d.php?t=573974

Thanks

**bigmac73** · 12-06-2013, 09:47 AM

[quote=bigmac73;6400261]Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any [URL="http://67-72chevytrucks.[/quote]

I did not mean it to be a WTB, i thought i was just checking up on a brother that was trying to help me out?????

11-14-2013, 02:50 PM	#1
1968k10blue Registered User Join Date: Aug 2013 Location: Mahtomedi, Minnesota Posts: 335	French lake auto parts mn I recently went to French Lake Auto Parts near St.Cloud MN and found these diamonds in the rough there, they are all long bed fleets and 1 blazer with top hopefully I will be going back out there soon to pick up parts for myself but if anyone would be interested in me looking for a part for you guys I can do that for you __________________ Austin 2005 GMC Sierra 1500 4X4 4.8l V8 (Wrecked) 2003 Chevy 1500 standard cab short bed 4x4 w/ 5.3l

11-14-2013, 03:04 PM	#2
bigmac73 Senior Member Join Date: Mar 2012 Location: Chesapeake, Va Posts: 1,275	Re: French lake auto parts mn Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here If you need any further assistance with that please contact any [URL="http://67-72chevytrucks. __________________ Mike 72 C-10 Cheyenne off frame resto and Upgraded to 4 wheel disk, Tilt, Dakota Digital Dash / Rear slider. 421 SBC / TH350 3000RPM Stall Progression Ignition /Holley 750 DP/3:73 gear Eaton Limited Slip unit / 2 1/2 exhaust glasspacks Last edited by 70cst; 12-03-2013 at 09:24 PM.

11-14-2013, 03:05 PM	#3
71K20chevy Registered User Join Date: Jul 2012 Location: Ft Wayne Indiana Posts: 1,204	Re: French lake auto parts mn Well, it could easily spend a few days going through that joint... __________________ 71 K20 64 GMC mud truck

11-14-2013, 03:07 PM	#4
1968k10blue Registered User Join Date: Aug 2013 Location: Mahtomedi, Minnesota Posts: 335	Re: French lake auto parts mn I will take a look, I am not sure when I will be going up, just remember that it will also cost shipping too if I do go. It is a good distance out of my way, about an hour and a half and their hours dont really work too well in my favor. so if you are willing to wait a little while I will check it out and see if they have anything there for you __________________ Austin 2005 GMC Sierra 1500 4X4 4.8l V8 (Wrecked) 2003 Chevy 1500 standard cab short bed 4x4 w/ 5.3l

11-14-2013, 03:09 PM	#5
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,245	Re: French lake auto parts mn That's where all of the parts trucks hide.... __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul

11-14-2013, 03:12 PM	#6
1968k10blue Registered User Join Date: Aug 2013 Location: Mahtomedi, Minnesota Posts: 335	Re: French lake auto parts mn yep, this place was huge, look it up online and see what they show you on their map, I took 3 hours and walked around there and only had time to skim past about half the vihicles there. if you notice too there were a few 60-66 there too, you can see the bed on the right of the picture. they keep this place surprisingly organized too, i did see two other of this year range but one was a blazer and for sale as a whole i think, and the other was a 67 flat bed __________________ Austin 2005 GMC Sierra 1500 4X4 4.8l V8 (Wrecked) 2003 Chevy 1500 standard cab short bed 4x4 w/ 5.3l

11-14-2013, 03:16 PM	#7
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: French lake auto parts mn gold mine!!!

11-14-2013, 03:17 PM	#8
1968k10blue Registered User Join Date: Aug 2013 Location: Mahtomedi, Minnesota Posts: 335	Re: French lake auto parts mn heres another cool one __________________ Austin 2005 GMC Sierra 1500 4X4 4.8l V8 (Wrecked) 2003 Chevy 1500 standard cab short bed 4x4 w/ 5.3l

11-14-2013, 03:24 PM	#9
bigmac73 Senior Member Join Date: Mar 2012 Location: Chesapeake, Va Posts: 1,275	Re: French lake auto parts mn Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here If you need any further assistance with that please contact any [URL="http://67-72chevytrucks. __________________ Mike 72 C-10 Cheyenne off frame resto and Upgraded to 4 wheel disk, Tilt, Dakota Digital Dash / Rear slider. 421 SBC / TH350 3000RPM Stall Progression Ignition /Holley 750 DP/3:73 gear Eaton Limited Slip unit / 2 1/2 exhaust glasspacks Last edited by 70cst; 12-03-2013 at 09:25 PM.

11-14-2013, 03:27 PM	#10
1968k10blue Registered User Join Date: Aug 2013 Location: Mahtomedi, Minnesota Posts: 335	Re: French lake auto parts mn alright i will look, at least a few of them still had complete engines still on them, so my guess if any of them had power brakes they would still be there. almost every single truck there was near complete __________________ Austin 2005 GMC Sierra 1500 4X4 4.8l V8 (Wrecked) 2003 Chevy 1500 standard cab short bed 4x4 w/ 5.3l

11-14-2013, 03:37 PM	#11
matt_field Registered User Join Date: Apr 2001 Location: Detroit Lakes, Minnesota Posts: 885	Re: French lake auto parts mn any gmc pass fenders or that 68 pass fender rust free? __________________ 1971 k5 blazer 80k mike survivor 1972 3/4 ton 4wd Cummins 12v 1967 swb 2wd 427bbc 1968 4wd shortbox 1971 Cheyenne swb k10 unrestored 1971 Cheyenne super 40k 402bb survivor 1967 Chevy k10 (first truck) 1968 L78 camaro survivor 18k miles 1969 z28 survivor 60k miles 1969 z28 survivor 39k miles 1969 z28 rs survivor 80k miles

11-14-2013, 04:13 PM	#12
1968k10blue Registered User Join Date: Aug 2013 Location: Mahtomedi, Minnesota Posts: 335	Re: French lake auto parts mn I have no idea what it looks like, that picture above is all I have to reference right now __________________ Austin 2005 GMC Sierra 1500 4X4 4.8l V8 (Wrecked) 2003 Chevy 1500 standard cab short bed 4x4 w/ 5.3l

11-14-2013, 04:26 PM	#13
72bowtiestepper Registered User Join Date: Feb 2013 Location: Northwest NJ Posts: 684	Re: French lake auto parts mn Man...I wish there boneyards in NJ like that.....a goldmine for sure !!

11-14-2013, 04:42 PM	#14
Mr Chevorlet Rusty Nuts Join Date: Sep 2008 Location: Clever Missouri Posts: 1,338	Re: French lake auto parts mn All i can say is, WOW! __________________ (Clever Missouri) Southwest Larry Mr Chevrolet My Build, The Marathon Truck http://67-72chevytrucks.com/vboard/s...d.php?t=604414

11-14-2013, 10:03 PM	#15
mrein3 Registered User Join Date: Feb 2000 Location: Center City, MN, USA Posts: 3,254	Re: French lake auto parts mn The next time you go, if you take highway 12, you pass within 1 mile of da-burb's house. He runs Bowtie Truck Stop, Inc. out of his barn out there. If you need any new things like rockers, etc., and you want to save on shipping costs, call him ahead of time and see if he can line it up for you. Not only is he a fellow board member, he is a heck of a nice guy too. __________________ '70 cab, '71 chassis, 383, TH350, NP205. '71 Malibu convertible '72 Malibu hard top Center City, MN



Register or Log In To remove these advertisements.

11-14-2013, 11:47 PM	#16
1968k10blue Registered User Join Date: Aug 2013 Location: Mahtomedi, Minnesota Posts: 335	Re: French lake auto parts mn Awesome! I will have to pm him and see, I will be going back out there on black Friday to get some parts for my self. Heck even if I don't need anything from him I may want to drop by and say hi! __________________ Austin 2005 GMC Sierra 1500 4X4 4.8l V8 (Wrecked) 2003 Chevy 1500 standard cab short bed 4x4 w/ 5.3l

11-15-2013, 02:58 PM	#17
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,414	Re: French lake auto parts mn Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here If you need any further assistance with that please contact any [URL="http://67-72chevytrucks. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear Last edited by 70cst; 12-03-2013 at 09:24 PM.

11-15-2013, 04:06 PM	#18
1968k10blue Registered User Join Date: Aug 2013 Location: Mahtomedi, Minnesota Posts: 335	Re: French lake auto parts mn I will add that to my list! __________________ Austin 2005 GMC Sierra 1500 4X4 4.8l V8 (Wrecked) 2003 Chevy 1500 standard cab short bed 4x4 w/ 5.3l

11-15-2013, 10:45 PM	#19
425HP409 425hp409 Join Date: Oct 2008 Location: Prosper Texas Posts: 841	Re: French lake auto parts mn I have bought parts for several different models of cars from them and they are real good people. Minnesota to Texas, looking good..... __________________ Charles 68 SWB, Dad bought new, now 396 & factory ac 64 Impala SS, 409 425HP, 4 speed AC 64 Bel Air Wagon, 400 Small Block 57 Bel Air all original 283 w/Factory Air 77 GMC Sprint, 454/425HP 67 Olds 442, all original 90 ZR1 Corvette

12-03-2013, 07:45 PM	#20
bigmac73 Senior Member Join Date: Mar 2012 Location: Chesapeake, Va Posts: 1,275	Re: French lake auto parts mn Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here If you need any further assistance with that please contact any [URL="http://67-72chevytrucks. __________________ Mike 72 C-10 Cheyenne off frame resto and Upgraded to 4 wheel disk, Tilt, Dakota Digital Dash / Rear slider. 421 SBC / TH350 3000RPM Stall Progression Ignition /Holley 750 DP/3:73 gear Eaton Limited Slip unit / 2 1/2 exhaust glasspacks Last edited by 70cst; 12-03-2013 at 09:25 PM.

12-03-2013, 09:26 PM	#21
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,373	Re: French lake auto parts mn Guys ... this is not a Want To Buy thread so please keep this thread as it was meant to be. Thanks __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

12-04-2013, 05:46 PM	#24
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,059	Re: French lake auto parts mn While your there, look for any trucks with this marking - deluxe centered below CUSTOM /10 or 20. See this link, it been a topic of discussion for a while: http://67-72chevytrucks.com/vboard/s...d.php?t=573974 Thanks __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

12-06-2013, 09:47 AM	#25
bigmac73 Senior Member Join Date: Mar 2012 Location: Chesapeake, Va Posts: 1,275	Re: French lake auto parts mn [quote=bigmac73;6400261]Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here If you need any further assistance with that please contact any [URL="http://67-72chevytrucks.[/quote] I did not mean it to be a WTB, i thought i was just checking up on a brother that was trying to help me out????? __________________ Mike 72 C-10 Cheyenne off frame resto and Upgraded to 4 wheel disk, Tilt, Dakota Digital Dash / Rear slider. 421 SBC / TH350 3000RPM Stall Progression Ignition /Holley 750 DP/3:73 gear Eaton Limited Slip unit / 2 1/2 exhaust glasspacks

Register or Log In To remove these advertisements.