72 C20 Cheyenne "Project" on CL in PA - not mine - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**MidLifer** · 11-19-2013, 05:56 PM

I don't know if I'm posting this more for someone who may be seriously interested or so you guys in the South and West see what we have to work with here in the salt belt - this is why I pay extra to ship trucks I've never seen back here:

http://philadelphia.craigslist.org/cto/4172583613.html

Anyway, it's a start..

**Graham57a** · 11-19-2013, 06:25 PM

Wow, that barn must of been missing walls and a roof. Door panel insert looks perfect, possible a decent parts truck

hopped up · 11-19-2013, 06:31 PM

ouch! what would it look like if it wasnt in that barn .

**bigmac73** · 11-19-2013, 08:47 PM

salt on the roads up there is murder on the body

**MidLifer** · 11-19-2013, 09:50 PM

Might be a good parts truck but parts trucks cost $400, not $1500. And since the seller has another C10 in his driveway, he must know that. But can't fault a guy for tryin'.

In The Ten Ring · 11-19-2013, 10:27 PM

I don't think I'd touch that one. Cab is too far gone for me.

I've learned the hard way, it's better to pay more for quality than to have to rebuild anything.

Lattimer · 11-19-2013, 10:40 PM

That looks about average condition for around here. Crazy on the price though.

**davischevy** · 11-19-2013, 11:16 PM

Somebody sure had trouble getting comfortable with which mirrors they wanted to use.

cleanfreak · 11-20-2013, 12:28 AM

looks better than most up here!

**special-K** · 11-20-2013, 08:15 AM

You're looking at an original paint low mile Cheyenne/20 for $1,500 that looks like it needs the same rust repair you see members doing to trucks from all over the country. Where's all the patina lovers??

It has some bad surface rust behind the door and on sides. I guess "barn find" can mean next to or near,not only in?

Andy4639 · 11-20-2013, 10:44 AM

This is why I love looking at these adds.

Everyone will say this that on a truck for sale.

If they were selling it it, it would be a classic!

Quote:

special-K,
Where's all the patina lovers?? Just a fancy word for the same thing Rust, talkabout a fad!

**special-K** · 11-21-2013, 08:22 AM

I said that??

I do remember saying,"Patina ain't nothin' but paint all scrambled up with an extra "a" added."

Racer382D · 11-21-2013, 08:35 AM

That's just slightly over what that truck would bring around here, believe it or not the one I am building right now started out a lot worse than this one. Mine is a factory swb so in my opinion it was worth saving. It's hard to tell but that bed floor doesn't look too bad. Usually the cab floor and the cab supports tell the real story.

11-19-2013, 05:56 PM	#1
MidLifer Senior Member Join Date: Apr 2011 Location: South NJ Posts: 1,265	72 C20 Cheyenne "Project" on CL in PA - not mine I don't know if I'm posting this more for someone who may be seriously interested or so you guys in the South and West see what we have to work with here in the salt belt - this is why I pay extra to ship trucks I've never seen back here: http://philadelphia.craigslist.org/cto/4172583613.html Anyway, it's a start..

11-19-2013, 06:25 PM	#2
Graham57a Senior Member Join Date: Aug 2010 Location: Asheville, North Carolina Posts: 1,855	Re: 72 C20 Cheyenne "Project" on CL in PA - not mine Wow, that barn must of been missing walls and a roof. Door panel insert looks perfect, possible a decent parts truck __________________ ANDREW 1972 Chevy SWB Cheyenne Super JANE http://67-72chevytrucks.com/vboard/s...d.php?t=462072 1972 GMC Jimmy PENNY http://67-72chevytrucks.com/vboard/s...d.php?t=735827 1968 GMC patina swb PEARL http://67-72chevytrucks.com/vboard/s...d.php?t=731315 1972 Chevy K20 BRUCE http://67-72chevytrucks.com/vboard/s...d.php?t=805788

11-19-2013, 06:31 PM	#3
hopped up Registered User Join Date: Jul 2010 Location: los angeles,ca Posts: 3,617	Re: 72 C20 Cheyenne "Project" on CL in PA - not mine ouch! what would it look like if it wasnt in that barn .

11-19-2013, 08:47 PM	#4
bigmac73 Senior Member Join Date: Mar 2012 Location: Chesapeake, Va Posts: 1,275	Re: 72 C20 Cheyenne "Project" on CL in PA - not mine salt on the roads up there is murder on the body __________________ Mike 72 C-10 Cheyenne off frame resto and Upgraded to 4 wheel disk, Tilt, Dakota Digital Dash / Rear slider. 421 SBC / TH350 3000RPM Stall Progression Ignition /Holley 750 DP/3:73 gear Eaton Limited Slip unit / 2 1/2 exhaust glasspacks

11-19-2013, 09:50 PM	#5
MidLifer Senior Member Join Date: Apr 2011 Location: South NJ Posts: 1,265	Re: 72 C20 Cheyenne "Project" on CL in PA - not mine Might be a good parts truck but parts trucks cost $400, not $1500. And since the seller has another C10 in his driveway, he must know that. But can't fault a guy for tryin'.

11-19-2013, 10:27 PM	#6
In The Ten Ring Registered User Join Date: Jun 2013 Location: West Virginia Posts: 6,421	Re: 72 C20 Cheyenne "Project" on CL in PA - not mine I don't think I'd touch that one. Cab is too far gone for me. I've learned the hard way, it's better to pay more for quality than to have to rebuild anything.

11-19-2013, 10:40 PM	#7
Lattimer Registered User Join Date: Jan 2013 Location: Mickleton, NJ Posts: 1,776	Re: 72 C20 Cheyenne "Project" on CL in PA - not mine That looks about average condition for around here. Crazy on the price though. __________________ Shawn 1970 Chevy C-10 SWB, 350, TKO 600 5 speed My build http://67-72chevytrucks.com/vboard/s...d.php?t=559881

11-19-2013, 11:16 PM	#8
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,836	Re: 72 C20 Cheyenne "Project" on CL in PA - not mine Somebody sure had trouble getting comfortable with which mirrors they wanted to use.

11-20-2013, 12:28 AM	#9
cleanfreak Registered User Join Date: Oct 2009 Location: port robinson ontario canada Posts: 400	Re: 72 C20 Cheyenne "Project" on CL in PA - not mine looks better than most up here!

11-20-2013, 08:15 AM	#10
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,858	Re: 72 C20 Cheyenne "Project" on CL in PA - not mine You're looking at an original paint low mile Cheyenne/20 for $1,500 that looks like it needs the same rust repair you see members doing to trucks from all over the country. Where's all the patina lovers?? It has some bad surface rust behind the door and on sides. I guess "barn find" can mean next to or near,not only in? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

11-21-2013, 08:22 AM	#12
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,858	Re: 72 C20 Cheyenne "Project" on CL in PA - not mine I said that?? I do remember saying,"Patina ain't nothin' but paint all scrambled up with an extra "a" added." __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

11-21-2013, 08:35 AM	#13
Racer382D Registered User Join Date: Sep 2013 Location: Litchfield,il Posts: 75	Re: 72 C20 Cheyenne "Project" on CL in PA - not mine That's just slightly over what that truck would bring around here, believe it or not the one I am building right now started out a lot worse than this one. Mine is a factory swb so in my opinion it was worth saving. It's hard to tell but that bed floor doesn't look too bad. Usually the cab floor and the cab supports tell the real story.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.