MI WTB wiring harness sections - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**TBONE1964** · 11-20-2013, 06:20 PM

I am looking for a couple of harness pigtails for the cluster end for a gauge style and non gauge style wiring harness. If you have a junk harness that has these ends, that is what I need. If you can leave at least 6 inches of the wire on it that would be better.

I use them to wire up and test my gauge clusters before selling them.

Also, I am looking for connectors for the tach harness to make some to sell.

Thank you in advance,
Tom

rich67 · 11-20-2013, 08:46 PM

tom help me understand. are you looking for the plug that plugs into the bezel?

**TBONE1964** · 11-20-2013, 09:05 PM

Quote:

Originally Posted by rich67

tom help me understand. are you looking for the plug that plugs into the bezel?

Yes Rich, that is the one. As long as it has at least 6 inches of wire with it, that would be good.

Thank you,
Tom

**Classic Bowties** · 11-20-2013, 09:08 PM

Quote:

Originally Posted by rich67

tom help me understand. are you looking for the plug that plugs into the bezel?

I think Tom is looking for some of these pictured OE plugs. Mel

**TBONE1964** · 11-20-2013, 09:10 PM

Quote:

Originally Posted by Classic Bowties

I think Tom is looking for some of these pictured OE plugs. Mel

Perfect

right on the money Mel.

**70STOVEBOLT** · 11-20-2013, 10:08 PM

Tom I have a harness for gauges. When you come down you can pick it up. Freebie!!!

Thanks,
Mark

**TBONE1964** · 11-20-2013, 10:19 PM

Quote:

Originally Posted by 70STOVEBOLT

Tom I have a harness for gauges. When you come down you can pick it up. Freebie!!!

Thanks,
Mark

I appreciate that Mark.

Thank you,
Tom

rich67 · 11-21-2013, 12:03 AM

tom ill see what i have layin around.

**TBONE1964** · 11-24-2013, 08:20 PM

ttt

In addition to the connector pig tails, I am also looking for good clean circuit boards for non tach and tach gauge clusters.

Let me know what you have.

Thanks again
T

GEARBOXGARAGE · 11-24-2013, 09:31 PM

I may have some available left over from previous parts trucks. Let me did into my stash this week and see what I have.

-Mike

**TBONE1964** · 11-24-2013, 10:09 PM

Quote:

Originally Posted by GEARBOXGARAGE

I may have some available left over from previous parts trucks. Let me did into my stash this week and see what I have.

-Mike

Let me know Mike. I appreciate it,
Tom

11-20-2013, 06:20 PM	#1
TBONE1964 Cluster King Join Date: Nov 2012 Location: Junction City, OR Posts: 5,263	WTB wiring harness sections I am looking for a couple of harness pigtails for the cluster end for a gauge style and non gauge style wiring harness. If you have a junk harness that has these ends, that is what I need. If you can leave at least 6 inches of the wire on it that would be better. I use them to wire up and test my gauge clusters before selling them. Also, I am looking for connectors for the tach harness to make some to sell. Thank you in advance, Tom __________________ Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com I am also a dealer for Counterpart for gauge cluster parts only. Also see my facebook page, CG&C

11-20-2013, 08:46 PM	#2
rich67 Registered User Join Date: Aug 2009 Location: New Canton, Il Posts: 1,857	Re: WTB wiring harness sections tom help me understand. are you looking for the plug that plugs into the bezel?

11-20-2013, 10:08 PM	#6
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,305	Re: WTB wiring harness sections Tom I have a harness for gauges. When you come down you can pick it up. Freebie!!! Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

11-21-2013, 12:03 AM	#8
rich67 Registered User Join Date: Aug 2009 Location: New Canton, Il Posts: 1,857	Re: WTB wiring harness sections tom ill see what i have layin around.

11-24-2013, 08:20 PM	#9
TBONE1964 Cluster King Join Date: Nov 2012 Location: Junction City, OR Posts: 5,263	Re: WTB wiring harness sections ttt In addition to the connector pig tails, I am also looking for good clean circuit boards for non tach and tach gauge clusters. Let me know what you have. Thanks again T __________________ Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com I am also a dealer for Counterpart for gauge cluster parts only. Also see my facebook page, CG&C

11-24-2013, 09:31 PM	#10
GEARBOXGARAGE Registered User Join Date: Sep 2011 Location: Sturgis, Michigan Posts: 509	Re: WTB wiring harness sections I may have some available left over from previous parts trucks. Let me did into my stash this week and see what I have. -Mike



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.