carb question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dally · 07-14-2003, 04:22 PM

I have a 4 bbl quadrajet on a 305. The engine was running so ruff it felt like i had a huge cam when my cam is stock. I decided to rebuild the carb. Upon dissassembly i found that one of the smaller throttle plates was bent. It was bent pretty bad. My question is --- Could this be the reason why the engine was running so ruff. Also if the throttle plates dont opperate will it idle but lack most of its power when trying to accelerate.

Mike76251 · 07-14-2003, 11:41 PM

That would throw off both circuits inside alright.

07-14-2003, 04:22 PM	#1
dally Registered User Join Date: Jul 2003 Location: lockhart texas Posts: 13	carb question I have a 4 bbl quadrajet on a 305. The engine was running so ruff it felt like i had a huge cam when my cam is stock. I decided to rebuild the carb. Upon dissassembly i found that one of the smaller throttle plates was bent. It was bent pretty bad. My question is --- Could this be the reason why the engine was running so ruff. Also if the throttle plates dont opperate will it idle but lack most of its power when trying to accelerate.

07-14-2003, 11:41 PM	#2
Mike76251 Senior Member Join Date: Mar 2003 Posts: 2,500	That would throw off both circuits inside alright.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.