MO 7044218 Rochester carburetor, ran good. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**specialtyretail** · 11-30-2013, 06:20 PM

SOLD,,,, THANKS.... Pulled this off the 70 GMC we parted out. Truck ran really well, carb has been sitting on a shelf in our shop for a couple of months. Truck was a 350 with auto transmission. Should bolt on and go. $50.00 shipped. Thanks, Fred.

teeitup · 11-30-2013, 06:44 PM

Fred, sandemonium from the board was looking for one of these

**specialtyretail** · 11-30-2013, 06:46 PM

Cool, I will see if i can track him down. I appreciate the lead. Thanks, Fred.

Sandemonium · 11-30-2013, 07:16 PM

Thanks guys, but due to the throttle linkage and the bowtie overdrive adapter I am using for my 700R4 I thnk I really need a 7042210

Thank you,

Bob

tallbob · 11-30-2013, 08:13 PM

Fred,
I might be interested in this carb for my 70 C-10. I see the divorced choke rod hanging off the side....do you have the correct thermostatic spring and cover that would have been attached to the intake manifold that was on the truck for this carb? If you do and could throw it in with the carb...that would be great. Let me know. Much thanks,
Bob

**WIDESIDE72** · 11-30-2013, 11:12 PM

Fyi i am using a quadrajet carb with the same linkage on my 72 with a 350/ 700r4. I forget who makes the tv cable bracket i am using but it bolts on using the two rear carb bolts and also holds the throttle cable.

Sandemonium · 12-01-2013, 12:32 AM

The bowtie overdrive tv cable adapter I am using fits on the bottom of this linkage.

Thank you,
Bob

**specialtyretail** · 12-01-2013, 01:08 AM

Quote:

Originally Posted by tallbob

Fred,
I might be interested in this carb for my 70 C-10. I see the divorced choke rod hanging off the side....do you have the correct thermostatic spring and cover that would have been attached to the intake manifold that was on the truck for this carb? If you do and could throw it in with the carb...that would be great. Let me know. Much thanks,
Bob

Hey Bob. I have a choke coil listed in another thread, not sure if it is the right one. I would throw it in if you buy the carb. Thanks, Fred.

tallbob · 12-01-2013, 10:46 AM

Fred,
OK that willl work for me. I'll get the Paypal going your way.
Thanks again,
Bob

**specialtyretail** · 12-01-2013, 10:55 AM

Quote:

Originally Posted by tallbob

Fred,
OK that willl work for me. I'll get the Paypal going your way.
Thanks again,
Bob

Hey Bob. Done deal. I will get them boxed up for you. Thanks, Fred.

**specialtyretail** · 12-04-2013, 12:41 PM

Quote:

Originally Posted by tallbob

Fred,
OK that willl work for me. I'll get the Paypal going your way.
Thanks again,
Bob

Hey Bob. Was wondering if we were still on?? Thanks, Fred.

ckexswb · 12-04-2013, 02:43 PM

Interested.... i could use it! mine just went foul and was going to have it rebuilt. In line

**specialtyretail** · 12-04-2013, 04:10 PM

I would like to hold off for him till this evening. Thanks, Fred.

**specialtyretail** · 12-04-2013, 08:08 PM

Quote:

Originally Posted by tallbob

Fred,
OK that willl work for me. I'll get the Paypal going your way.
Thanks again,
Bob

Hey Bob. Should get the carb shipped out Thursday to you. Thanks, Fred.

tallbob · 12-05-2013, 03:40 PM

Thanks again,Fred. I got the email with the tracking #s. I'm still looking for the pulley that bolts to the harmonic balancer for my power steering conversion. Let me know if you come across one. Bob

11-30-2013, 06:20 PM	#1
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,634	7044218 Rochester carburetor, ran good. SOLD,,,, THANKS.... Pulled this off the 70 GMC we parted out. Truck ran really well, carb has been sitting on a shelf in our shop for a couple of months. Truck was a 350 with auto transmission. Should bolt on and go. $50.00 shipped. Thanks, Fred. Attached Images __________________ Our paypal is specialtyretail@yahoo.com Please DO NOTsend paypal funds as a gift, right is right. Thanks.... Sorry, we CANNOT ship larger parts. Thanks. Last edited by specialtyretail; 12-04-2013 at 08:07 PM.

11-30-2013, 06:44 PM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 7044218 Rochester carburetor, ran good. Fred, sandemonium from the board was looking for one of these __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-30-2013, 06:46 PM	#3
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,634	Re: 7044218 Rochester carburetor, ran good. Cool, I will see if i can track him down. I appreciate the lead. Thanks, Fred. __________________ Our paypal is specialtyretail@yahoo.com Please DO NOTsend paypal funds as a gift, right is right. Thanks.... Sorry, we CANNOT ship larger parts. Thanks.

11-30-2013, 07:16 PM	#4
Sandemonium Proud owner of a 55.1 AD Join Date: Oct 2006 Location: Desert Hills, AZ Posts: 460	Re: 7044218 Rochester carburetor, ran good. Thanks guys, but due to the throttle linkage and the bowtie overdrive adapter I am using for my 700R4 I thnk I really need a 7042210 Thank you, Bob Last edited by Sandemonium; 12-01-2013 at 12:24 AM.

11-30-2013, 08:13 PM	#5
tallbob Registered User Join Date: Aug 2013 Location: Greensburg,Pa Posts: 147	Re: 7044218 Rochester carburetor, ran good. Fred, I might be interested in this carb for my 70 C-10. I see the divorced choke rod hanging off the side....do you have the correct thermostatic spring and cover that would have been attached to the intake manifold that was on the truck for this carb? If you do and could throw it in with the carb...that would be great. Let me know. Much thanks, Bob

11-30-2013, 11:12 PM	#6
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 7044218 Rochester carburetor, ran good. Fyi i am using a quadrajet carb with the same linkage on my 72 with a 350/ 700r4. I forget who makes the tv cable bracket i am using but it bolts on using the two rear carb bolts and also holds the throttle cable.

12-01-2013, 12:32 AM	#7
Sandemonium Proud owner of a 55.1 AD Join Date: Oct 2006 Location: Desert Hills, AZ Posts: 460	Re: 7044218 Rochester carburetor, ran good. The bowtie overdrive tv cable adapter I am using fits on the bottom of this linkage. Thank you, Bob Attached Images

12-01-2013, 10:46 AM	#9
tallbob Registered User Join Date: Aug 2013 Location: Greensburg,Pa Posts: 147	Re: 7044218 Rochester carburetor, ran good. Fred, OK that willl work for me. I'll get the Paypal going your way. Thanks again, Bob

12-04-2013, 02:43 PM	#12
ckexswb 67-72=-5 Join Date: Jun 2007 Location: calif/ beach Posts: 807	Re: 7044218 Rochester carburetor, ran good. Interested.... i could use it! mine just went foul and was going to have it rebuilt. In line __________________ 1972 Cheyenne super swb 4x4 "QUEEN" 1996 Dodge ram diesel.... 4x4 "HORSE"

12-04-2013, 04:10 PM	#13
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,634	Re: 7044218 Rochester carburetor, ran good. I would like to hold off for him till this evening. Thanks, Fred. __________________ Our paypal is specialtyretail@yahoo.com Please DO NOTsend paypal funds as a gift, right is right. Thanks.... Sorry, we CANNOT ship larger parts. Thanks.

12-05-2013, 03:40 PM	#15
tallbob Registered User Join Date: Aug 2013 Location: Greensburg,Pa Posts: 147	Re: 7044218 Rochester carburetor, ran good. Thanks again,Fred. I got the email with the tracking #s. I'm still looking for the pulley that bolts to the harmonic balancer for my power steering conversion. Let me know if you come across one. Bob



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.