Share your Burnout technique - The 1947 - Present Chevrolet & GMC Truck Message Board Network

alloutpro · 12-06-2013, 12:53 AM

Just the other day i had the urge to smell some rubber and i thought why don't i ask what everyone's favorite technique for doing a burnout or breaking traction and having some concrete skating was? And what your opinion is on being the nicest to "the ol' Beast was"...

67_C-30 · 12-06-2013, 01:15 AM

Pin to 5 grand, dump the clutch, and speed shift the three on the tree!!

'69 C-10 Beater Truck Burnout 250 inline 6...

*Fitz* · 12-06-2013, 01:17 AM

Quote:

Originally Posted by alloutpro

Just the other day i had the urge to smell some rubber and i thought why don't i ask what everyone's favorite technique for doing a burnout or breaking traction and having some concrete skating was? And what your opinion is on being the nicest to "the ol' Beast was"...

With one of these under the hood you don't NEED technique but you better be strapped in. Never could get a video posted here but here's a link to one. The black marks are 300 feet long! http://s851.photobucket.com/user/BWF...out-1.mp4.html

alloutpro · 12-06-2013, 01:28 AM

HahAaaaaaaa...nice...i'm running 396/ th400 ...automatic

alloutpro · 12-06-2013, 01:33 AM

Quote:

Originally Posted by 67_C-30

Pin to 5 grand, dump the clutch, and speed shift the three on the tree!!

'69 C-10 Beater Truck Burnout 250 inline 6 cylinder - YouTube

By the Way RMFT...we'll get 'em next year....

frank69 · 12-06-2013, 02:31 AM

go to you tube Blown Big Block Burnoff a little video my nephew did a few years ago of my 69

zeldman · 12-06-2013, 02:43 AM

Quote:

Originally Posted by alloutpro

what everyone's favorite technique for doing a burnout?

When I had an engine that would do that, I would just mash the loud pedal and hang on.

alloutpro · 12-06-2013, 03:49 AM

Quote:

Originally Posted by frank69

go to you tube Blown Big Block Burnoff a little video my nephew did a few years ago of my 69

i watched a flat black step side.....sounds nice and doesn't have any bit of baby about that monster....

**68350** · 12-06-2013, 06:36 AM

Nothing too fancy here, jus give a little brake and the 496 does the rest, it doesn't take much with 570 ft lb tq

volksworld · 12-06-2013, 08:09 AM

step on the gas

Longhorn 70 · 12-06-2013, 09:30 AM

I don't know if this is off subject but I was working on my Mom's car when I was a kid. She needed to go to the store so I told her she cold take my 66 Olds Starfire with a mildly built 425 under the hood. She was used to her F**d station wagon. She got in the Olds. Idled it out of the drive. Pushed down on the gas. Fried the tires. Jammed the brakes. Fried the tires. Put it in park. Got out, left it idling in the street and said "I'm not driving that piece of junk. Just get my breaks fixed!"

My favorite don't drive the truck, get in the Vette.

67ChevyRedneck · 12-06-2013, 10:15 AM

They're trucks with little weight over the rear... pedal to the floor breaks 'em loose easy with a V8 and 3.73. I can even get a second gear scratch with my 700R and worn out 350.

dmartin1 · 12-06-2013, 11:01 AM

Quote:

Originally Posted by Longhorn 70

I don't know if this is off subject but I was working on my Mom's car when I was a kid. She needed to go to the store so I told her she cold take my 66 Olds Starfire with a mildly built 425 under the hood. She was used to her F**d station wagon. She got in the Olds. Idled it out of the drive. Pushed down on the gas. Fried the tires. Jammed the brakes. Fried the tires. Put it in park. Got out, left it idling in the street and said "I'm not driving that piece of junk. Just get my breaks fixed!"

My favorite don't drive the truck, get in the Vette.

thanks for the laugh lol! thats great

brad_man_72 · 12-06-2013, 02:20 PM

On an autocross course, one handed, pulling a boat full of board members, blindfolded.

12-06-2013, 12:53 AM	#1
alloutpro Registered User Join Date: Nov 2013 Location: ventura,CA Posts: 33	Share your Burnout technique Just the other day i had the urge to smell some rubber and i thought why don't i ask what everyone's favorite technique for doing a burnout or breaking traction and having some concrete skating was? And what your opinion is on being the nicest to "the ol' Beast was"... __________________ Roll Tide! '69 C20 Longhorn 396

12-06-2013, 01:28 AM	#4
alloutpro Registered User Join Date: Nov 2013 Location: ventura,CA Posts: 33	Re: Share your Burnout technique HahAaaaaaaa...nice...i'm running 396/ th400 ...automatic __________________ Roll Tide! '69 C20 Longhorn 396

12-06-2013, 02:31 AM	#6
frank69 Registered User Join Date: Feb 2007 Location: Laughlin,Nv Posts: 141	Re: Share your Burnout technique go to you tube Blown Big Block Burnoff a little video my nephew did a few years ago of my 69

12-06-2013, 06:36 AM	#9
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: Share your Burnout technique Nothing too fancy here, jus give a little brake and the 496 does the rest, it doesn't take much with 570 ft lb tq __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

12-06-2013, 08:09 AM	#10
volksworld Registered User Join Date: Apr 2011 Location: formerly NY currentlyNC Posts: 389	Re: Share your Burnout technique step on the gas __________________ 1970 short step c10 leaf spring 454

12-06-2013, 09:30 AM	#11
Longhorn 70 Registered User Join Date: Dec 2012 Location: Chandler AZ Posts: 1,149	Re: Share your Burnout technique I don't know if this is off subject but I was working on my Mom's car when I was a kid. She needed to go to the store so I told her she cold take my 66 Olds Starfire with a mildly built 425 under the hood. She was used to her Fd station wagon. She got in the Olds. Idled it out of the drive. Pushed down on the gas. Fried the tires. Jammed the brakes. Fried the tires. Put it in park. Got out, left it idling in the street and said "I'm not driving that piece of junk. Just get my breaks fixed!" My favorite don't drive the truck, get in the Vette. __________________ 1970 Longhorn, Front Disc, 350/4 bolt, 882 heads, HEI, Edelbrock, 700R4, HO-52/4.11. 1996 Corvette, Collector Roadster, LT4, 396, 450RWHP, 6sp, 4.11/Dana44/posi 5 point roll bar And let us not grow weary of doing good, for in due season we will reap, if we do not give up. Gal 6:9**

12-06-2013, 10:15 AM	#12
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Share your Burnout technique They're trucks with little weight over the rear... pedal to the floor breaks 'em loose easy with a V8 and 3.73. I can even get a second gear scratch with my 700R and worn out 350. __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

12-06-2013, 02:20 PM	#14
brad_man_72 the boat guy Join Date: Jul 2007 Location: springfield mo Posts: 2,339	Re: Share your Burnout technique On an autocross course, one handed, pulling a boat full of board members, blindfolded. Attached Images __________________ 67, swb, fleet, tach, throttle, 5.3, 4l60e, 3.73's, fuel cell, 5 lug, p.d.b., 4-6 drop. great little truck 66, stevens drag/ski 18' silouette, 350, 2.02 doublehump heads. comp extreme marine 278 cam, vette 7 fin valve covers, old polished edelbrock intake, velvetdrive, casale v-drive, adj cavitation plate. 28, model a rpu project,



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.