Has there ever been a question this forum that hasn't been anwsered?

[aerotruk63]

The more I read this forum, the more I think we could solve all of the worlds problems, if we based them on 60-66 trucks!

[LostMy65]

One question thats never been asked is; will a 60-66 body fit on a 73-87 frame?

[aerotruk63]

Captainfab has addressed this several times I believe. The kick up in the rear of the frame is different.

[LostMy65]

Originally Posted by aerotruk63

Captainfab has addressed this several times I believe. The kick up in the rear of the frame is different.

I was being facetious.

[LostMy65]

Yes, anytime I have a question regarding my truck, its most always been answered.

[1963c-10]

I still haven't gotten those winning lottery numbers

[firemanjimtfd]

Where are all the short wides hiding in Oklahoma. LOL

[aerotruk63]

Originally Posted by 1963c-10

I still haven't gotten those winning lottery numbers

The winning numbers are a combo of 0-6. 7-8-9 are considered unlucky.

[aerotruk63]

Originally Posted by firemanjimtfd

Where are all the short wides hiding in Oklahoma. LOL

See now there's one that just surfaced lately, Wide Side is GMC and Fleetside is Chevrolet.

[oem4me]

Yes, the question that immediately comes to mind is...
Where can I find an NOS middle floor mat for my Suburban. Lol

[Dillon Rock]

Mine is where is my unicorn Chevy truck? I know it's out there, just needs to come out of hiding. Description is as follows: 60-66 1 ton crew cab, long bed (stepside or fleet side), spot lights, cab lights, 4WD with PTO (or factory snow plow mount), heavy duty step bumper, gun rack, 292-327 block, manual, all paperwork, all original, any accessories from dealership included, etc, etc.....

[60-66]

How about, "will my wife or kids buy me a new 60-66 for Christmas ?

[aerotruk63]

Originally Posted by oem4me

Yes, the question that immediately comes to mind is...
Where can I find an NOS middle floor mat for my Suburban. Lol

Santa has been notified, but as luck has it, he just picked up a Burb himself!

Originally Posted by Dillon Rock

Mine is where is my unicorn Chevy truck? I know it's out there, just needs to come out of hiding. Description is as follows: 60-66 1 ton crew cab, long bed (stepside or fleet side), spot lights, cab lights, 4WD with PTO (or factory snow plow mount), heavy duty step bumper, gun rack, 292-327 block, manual, all paperwork, all original, any accessories from dealership included, etc, etc.....

A pinch to the soft tissue below your bicep, time to wake up! If you did find it, you'd create a new grail that would keep you interested.

Originally Posted by 60-66

How about, "will my wife or kids buy me a new 60-66 for Christmas ?

Hate to tell you this but they all sold 46+ years ago, and steady yourself, they don't make NEW one's anymore. You'll have to settle for one that was purchased and garaged since the owner purchased it and died. You know, like the one's I find on Craigslist! Course you'd buy it out from under me like in the past.

[NEWFISHER]

Will anyone ever make money on a Lambrecht auction vehicle?

If a 60-66 truck traveling North at 60 mph and passes a 67-72 truck, a 47-54 truck and a few square bodies going the other direction, are they leaving Dinos or going to Dinos? Hint ( there aren't any other 60_66 trucks on the road so they must all be at Dinos)

You Asked for questions that hAve never been asked right?

[joedoh]

Originally Posted by firemanjimtfd

Where are all the short wides hiding in Oklahoma. LOL

you should visit more often, a guy just GAVE away a swb truck in oklahoma

[Auctioneerhere]

Originally Posted by LostMy65

One question thats never been asked is; will a 60-66 body fit on a 73-87 frame?

Yes it will fit.

It is best for a 4wd. A two wheel drive will look like a 4x4.

The front core support will be up about 3 inches.

I have done it, I would do it again only if I had no choice. You have to change the cab mounts front & back.

It's a chore & I can see where people would get disgusted with it as they tried to do it.

[aerotruk63]

Originally Posted by NEWFISHER

Will anyone ever make money on a Lambrecht auction vehicle?

If a 60-66 truck traveling North at 60 mph and passes a 67-72 truck, a 47-54 truck and a few square bodies going the other direction, are they leaving Dinos or going to Dinos? Hint ( there aren't any other 60_66 trucks on the road so they must all be at Dinos)

You Asked for questions that hAve never been asked right?

Notice the a in the question, there`s a limit of one, singular, uno por favor, une sìl vous plait! If you included pics then you can ask multiple question. I guuess you didn`t read the rules.

First-Lambrecht vehicles are like art, not everyone appreciates the concept.

Second- I`ll leave the expert, Dino to answer that one. Dino? Dino?

Third- Once again refer to the title, questions that have not been answered. ( should have made it in a pop up book style so we could have illustrations )

[60-66]

Quote:
Originally Posted by 60-66 View Post
How about, "will my wife or kids buy me a new 60-66 for Christmas ?

Hate to tell you this but they all sold 46+ years ago, and steady yourself, they don't make NEW one's anymore. You'll have to settle for one that was purchased and garaged since the owner purchased it and died. You know, like the one's I find on Craigslist! Course you'd buy it out from under me like in the past.

Actually Aero, My wife bought me TWO brand new Chevrolet C10s this fall, of coarse I paid for them but it was her bidder number.....Ones a 1963 and ones a 1964 and I am the first registered owner of two brand new trucks. As for the craigs list trucks you find me and I offer to give you any part you want from them cuz you cant get there fast enough.......THANK YOU !!!! and Merry Christmas , oh... please find me more

[aerotruk63]

Originally Posted by 60-66

Quote:
es a 1964 and I am the first registered owner of two brand new trucks. As for the craigs list trucks you find me and I offer to give you any part you want from them cuz you cant get there fast enough.......THANK YOU !!!! and Merry Christmas , oh... please find me more

Ouch that stings!

[Softpatch]

Whats a Henweigh .?
.
How often do i have to adjust the johnson rod.?
.
What was the first part that you've ever had fell off while driving.? (tools don't count)

.

[aerotruk63]

Originally Posted by Softpatch

Whats a Henweigh .?
.
How often do i have to adjust the johnson rod.?
.
What was the first part that you've ever had fell off while driving.? (tools don't count)

.

1st That's an old one

2nd Isn't that kind of personal?

3rd. That would make a good thread, you should post it!

[1963c-10]

Was a thread brought up by oem4me on if trucks were produced in Van Nuys Assembly plant that remains unanswered.

[61K10]

and a interior paint code for 60/61 silver/gray

[1963c-10]

I can't provide a code, but I can send a color sample from the 61 I chopped up for parts.

[Keith Seymore]

Originally Posted by 1963c-10

Was a thread brought up by oem4me on if trucks were produced in Van Nuys Assembly plant that remains unanswered.

I can probably answer this, as I have all the assembly plant charts.

What was the specific question?

K