Foreign Model C10 Tail Lights

[Matt21lutz]

I just saw on here the two pics below, I know that it's from over in Algeria but does ANYBODY know where in the world I could possibly get the rear replacements for that style? Basically I want to get rid of the U.S. version of the 81 tail lights and change it out with the foreign model. I like the look of those a lot better. Granted I do realize I have to cut out what I have and weld in the new stuff but still, I want those! haha

You're help would be greatly appreciated!

[andrewmp6]

Ebay is probably your only shot.I think the mexican trucks used a different tail light to.

[bdiamond]

Originally Posted by andrewmp6

I think the mexican trucks used a different tail light to.

These?
http://www.xtralights.com/73-87ckpickup.aspx

[gezn2]

I think you're looking for some fairly low-volume parts spec'ed out by an importer, that's a North American style box, you're probably going to have the best luck digging around Australian or South African aftermarket sites.
The Argie/Brazilian D-20 has very different box sheet-metal, as do the Mexican-market trucks...

[esbstuff]

If you can get a vin, parts lookup is easy. IF the part is still available at GM.

I did this years ago with my 2nd gen S10. Got a Mexican vin and went to the dealer and ordered Mexican S10 tailights. BTW those parts were in-stock, in the US.

[DirtyLarry]

Originally Posted by bdiamond

These?
http://www.xtralights.com/73-87ckpickup.aspx

No, Mexican square body trucks used 67-72 tail lights although a lot of Mexicans seem to like those hideous Taiwanese tail lights in your link

Look closely at this picture, there is a Mexican Chevy truck here with the Mexican market tail lights…they are nothing like the euro spec tail lights that required segregated amber turn signals that the OP is looking for.

[Matt21lutz]

Thanks for advice, haven't found anything, been looking but I have to agree with you on that one. The color of these things are extremely ugly, I just like the shap of them and I plan on adding my own custom touches. IF I can find something like it. For instance make a mold of the lenses and create my own with the DIY kits from Alumilite then making my own custom LED tail lights, I've done it for other stuff, should be easy enough.

Once again thanks, keep the answers coming, appreciate the help!

[andrewmp6]

Hit up the junkyards look for 80s import mini trucks mazda,isuzu or nissan.One of them should be close to the style your looking for.When you find what you like cut out the whole light pocket.

[special-K]

Originally Posted by DirtyLarry

Look closely at this picture, there is a Mexican Chevy truck here with the Mexican market tail lights…they are nothing like the euro spec tail lights that required segregated amber turn signals that the OP is looking for.

Is it just me,or does the one on the right look better than the one on the left?

Looks to me like the Euro light assemblies require sheet metal alteration. Looks to me like the 88-98 assemblies. Going to be tough getting a VIN off someone else's truck,unless they're an awful good friend.

[nekkidhillbilly]

Originally Posted by DirtyLarry

No, Mexican square body trucks used 67-72 tail lights although a lot of Mexicans seem to like those hideous Taiwanese tail lights in your link

Look closely at this picture, there is a Mexican Chevy truck here with the Mexican market tail lights…they are nothing like the euro spec tail lights that required segregated amber turn signals that the OP is looking for.

id def stop for that. been looking closely still havent seen a truck though.

[nekkidhillbilly]

i think those use the same lights as isuzu trucks and troopers they sold in the 80s. that or there s10 lights. gm wouldnt spend the money im sure on a special housing when they could use another one already made.

[MalibuSSwagon]

I was searching for the Australian built C20 and C30's, but it seems they all have the same North American tail lights. Which is odd, but I haven't found a good rear end pic yet. Maybe message a few of the Aussie members?

[83GMCK2500]

I looked into this a few years ago, so I might be wrong, but if I remember right Australia does not require the distinct stop/turn difference that the Latin countries do. If you look at a Brazilian (for example) GMT-400 Blazer/Tahoe/Suburban for example you will see amber signals in the rear tail lamps but on a Holden one they're solid red like ours.

[Matt21lutz]

Does anyone know where I could possibly have custom tail light lenses made? I've looked but I cannot find anyone who makes them just repair kits or something like that.

[KQQL IT]

Some motorhome mfg use an amber turn signal that looks very similar to a square taillight. Find a set and make your own.

[special-K]

Originally Posted by nekkidhillbilly

i think those use the same lights as isuzu trucks and troopers they sold in the 80s. that or there s10 lights. gm wouldnt spend the money im sure on a special housing when they could use another one already made.

Well,yourlogic is correct. GM is very smart about that. Helps us guys out,too,as well as being a reason GM has the best parts support. But,it looks like they made different bedsides for those lights. I still say they are 88-98s or dang close

[andrewmp6]

They do look kinda isuzu http://www.ebay.com/itm/ISUZU-PICKUP...-/251122519262 as far as custom tail lights go to a junkyard cut something out and make it fit your truck.Most companies won't make after market tail lights unless you order over 100k units.

[willett]

They kinda look like the lenses off an old Datsun king cab

[nekkidhillbilly]

Originally Posted by special-K

Well,yourlogic is correct. GM is very smart about that. Helps us guys out,too,as well as being a reason GM has the best parts support. But,it looks like they made different bedsides for those lights. I still say they are 88-98s or dang close

actually id say there the same bedside on the mexico sa and na. gm prob got the bedsides none cut then cut them out for the light depending on model. be cheaper that way.

[Remon.]

A '74 in South Afrika. Has the rectangular tail lights.



http://www.junkmail.co.za/motoring/chevrolet/gauteng/johannesburg/west-rand/chevrolet-c10-pickup-truck-1974-for-sale-31076977#prettyPhoto[gallery2]/0/

[walka]

We don't have those lights here in Australia

[Remon.]

Btw: Also look at the tailgate of the '74 I posted above. Never seen a square with Chevrolet stamped on the entire width of the tailgate.

Kinda special of what?

[Axle]

OP's taillights remind me of mid 90's E150 van taillights, flat top to bottom (f150 have abit of a step, but same sort of shape with reverse light at the bottom).

Alex.

[Pyrotechnic]

I would look into using something similar that is readily available here.

Mentioned earlier in the thread were the amber RV tail lights. With some cutting and gluing of these and your original tail lights to create a hybrid, you could have something very close to what you want that is bolt in and requires no sheet metal mods. You will have to figure out the bulb situation and how isolate the red and yellow sections, but it sure beats body work.

[DirtyLarry]

The biggest hassle in all of this is the wiring. Moving from integrated stop/turn signals to isolated takes some work.