need 99 suburban lift suggestion - The 1947 - Present Chevrolet & GMC Truck Message Board Network

9teen69 · 07-18-2003, 01:44 PM

I need new tires for the burb and don't want to put stock size tires back on. What's the largest tire I can fit if I put a 2" body lift? I don't like the look of body lifts but i thought a 2" wouldn't be too noticable. Will I run into additional cost or mods with a 2"?

I looked into puttin a 6" suspension lift but fell over when I heard the price.

alf4444 · 07-18-2003, 04:34 PM

should be able to clear 33's with ease. Most bodylift kits should come with everything you need, except maybe rear bumper brackets.

9teen69 · 07-22-2003, 06:48 PM

Thanks...Who makes a good kit? I have a buddy that is a keystone distributor - maybe get one from him if I knew a good brand.

Badbowtie34 · 07-24-2003, 11:24 PM

I Used a performance accessories on my 94. it comes with everything u need except the rear bumper brackets which i didnt want anyways because your bumper is useless if u lift it as far as pulling anything. anyways i thought they made a really good kit,except the fact that mine had the wrong bolts with it. anyways hope this helps

9teen69 · 07-25-2003, 12:03 AM

Thanks for the tip - going with a roll pan anyway.

yellowgmc · 07-25-2003, 12:30 PM

i've used performance accessories before as well. good kit. cheap too.

RooLer · 07-26-2003, 01:10 AM

I just installed a 3" PA lift today on my 95 Yukon and did not receive any rear bumper brackets nor did I need them. The install was difficult only when it came to breaking the old bolts loose. I was told by the 4wheel drive store that 33" tires would be fine but 35"'s would be cutting it very close.

As far as the looks go, mine looks outstanding. I hate being able to see through a truck above the rear tires so I got creative and bought two 10" by 10' rolls of sheet metal (roofing section at local Home depot) for about $10 and used self tapping screws to secure it in the wheelwells. Also cut a long piece 5" wide to put above the rear bumper to cover that gap. Of course I painted it all with undercoating black paint. This method keeps your truck from having the body lift look. If you don't want to do this you can buy gap kits along with the lift kit.

Total cost for the entire job was about $180. I priced the 2" when I bought the 3" and it was about $25-$30 cheaper.

Good luck. Hope this helps.

RooLer · 07-26-2003, 11:25 AM

Hey 9, I posted some pics of my lift. Check them out. MY tires are 305x70R16 which are them same as 33" inch tires.

9teen69 · 07-29-2003, 11:34 PM

Rooler -

Could you email those pics - they're not posting?

nevermind - I see your new post

O'skool 72GMC · 08-03-2003, 08:23 PM

Please no BODY LIFT!!!
I know the Suspension lift is expensive.
I have a 99 Yukon and i wanted to lift it but bought another toy instead.
Any ways!!
You did n't mention whether or not you had the Auto trac on the burb if you dnt' its alot cheaper
Rancho makes a great 2-3" suspension lift that will clear 33's
RCD makes a great kit for clearing 33's with autotrac.
Or just get 285 and only rub when you hit a hard dip.

9teen69 · 08-04-2003, 12:51 PM

O' -
The bummer is I do have "auto-trac". Local shop quoted me $1700 for a 6" and $900 to install plus $600 for driveshafts due to auto-trac. $3200 + another $1220 for rims & tires really isn't an option since I have too many vehicles needing paint

I have 265's now and really don't want to put those back on. A $150.00 2" body lift is looking real good if I can put 33's on it.

07-18-2003, 01:44 PM	#1
9teen69 Registered User Join Date: Sep 2002 Location: Austin, Texas Posts: 1,048	need 99 suburban lift suggestion I need new tires for the burb and don't want to put stock size tires back on. What's the largest tire I can fit if I put a 2" body lift? I don't like the look of body lifts but i thought a 2" wouldn't be too noticable. Will I run into additional cost or mods with a 2"? I looked into puttin a 6" suspension lift but fell over when I heard the price. __________________ 72 Cheyenne SWB C10 (daily driver) (Super fake cause I just love the glovebox emblem) 70 Camaro RS (frame-off in pieces) 70 Camaro RS (daily driver backup) 69 Custom LWB C10 (son now drives)

07-18-2003, 04:34 PM	#2
alf4444 Registered User Join Date: Dec 2002 Location: taylorsville, UT Posts: 778	should be able to clear 33's with ease. Most bodylift kits should come with everything you need, except maybe rear bumper brackets. __________________ 2011 CCSB GMC 2500HD DMAX 73 GMC 3/4 ton 4x4 96 Chevy 1500 STD Cab Shortbed Z71 Owner of WickedWolfRC.com

07-22-2003, 06:48 PM	#3
9teen69 Registered User Join Date: Sep 2002 Location: Austin, Texas Posts: 1,048	Thanks...Who makes a good kit? I have a buddy that is a keystone distributor - maybe get one from him if I knew a good brand. __________________ 72 Cheyenne SWB C10 (daily driver) (Super fake cause I just love the glovebox emblem) 70 Camaro RS (frame-off in pieces) 70 Camaro RS (daily driver backup) 69 Custom LWB C10 (son now drives)

07-24-2003, 11:24 PM	#4
Badbowtie34 Registered User Join Date: Jul 2003 Posts: 13	I Used a performance accessories on my 94. it comes with everything u need except the rear bumper brackets which i didnt want anyways because your bumper is useless if u lift it as far as pulling anything. anyways i thought they made a really good kit,except the fact that mine had the wrong bolts with it. anyways hope this helps __________________ MY RIDES 00 Silverado Z-71 94 Silverado 4X4 94 Honda 300EX

07-25-2003, 12:03 AM	#5
9teen69 Registered User Join Date: Sep 2002 Location: Austin, Texas Posts: 1,048	Thanks for the tip - going with a roll pan anyway. __________________ 72 Cheyenne SWB C10 (daily driver) (Super fake cause I just love the glovebox emblem) 70 Camaro RS (frame-off in pieces) 70 Camaro RS (daily driver backup) 69 Custom LWB C10 (son now drives)

07-25-2003, 12:30 PM	#6
yellowgmc Getting cabin fever?!?!?! Join Date: Oct 2002 Location: chisholm, mn Posts: 1,679	i've used performance accessories before as well. good kit. cheap too. __________________ Member of the Discs Up Front Club 1972 GMC 1500 1994 F-150 XL 4x4 Tact is for people not whitty enough to be sarcastic

07-26-2003, 01:10 AM	#7
RooLer Been there, done that! Join Date: Aug 2002 Location: Edmond, Ok but soon to be Reno, Nv Posts: 119	I just installed a 3" PA lift today on my 95 Yukon and did not receive any rear bumper brackets nor did I need them. The install was difficult only when it came to breaking the old bolts loose. I was told by the 4wheel drive store that 33" tires would be fine but 35"'s would be cutting it very close. As far as the looks go, mine looks outstanding. I hate being able to see through a truck above the rear tires so I got creative and bought two 10" by 10' rolls of sheet metal (roofing section at local Home depot) for about $10 and used self tapping screws to secure it in the wheelwells. Also cut a long piece 5" wide to put above the rear bumper to cover that gap. Of course I painted it all with undercoating black paint. This method keeps your truck from having the body lift look. If you don't want to do this you can buy gap kits along with the lift kit. Total cost for the entire job was about $180. I priced the 2" when I bought the 3" and it was about $25-$30 cheaper. Good luck. Hope this helps.

07-26-2003, 11:25 AM	#8
RooLer Been there, done that! Join Date: Aug 2002 Location: Edmond, Ok but soon to be Reno, Nv Posts: 119	My pics Hey 9, I posted some pics of my lift. Check them out. MY tires are 305x70R16 which are them same as 33" inch tires. __________________ '95 GMC Yukon 2-Door 4X4 350TBI 3" PA body Lift 305x70R16

07-29-2003, 11:34 PM	#9
9teen69 Registered User Join Date: Sep 2002 Location: Austin, Texas Posts: 1,048	Rooler - Could you email those pics - they're not posting? nevermind - I see your new post __________________ 72 Cheyenne SWB C10 (daily driver) (Super fake cause I just love the glovebox emblem) 70 Camaro RS (frame-off in pieces) 70 Camaro RS (daily driver backup) 69 Custom LWB C10 (son now drives) Last edited by 9teen69; 07-29-2003 at 11:38 PM.

08-03-2003, 08:23 PM	#10
O'skool 72GMC Registered User Join Date: Jan 2002 Location: San Diego, CA, USA Posts: 250	99 Lift Please no BODY LIFT!!! I know the Suspension lift is expensive. I have a 99 Yukon and i wanted to lift it but bought another toy instead. Any ways!! You did n't mention whether or not you had the Auto trac on the burb if you dnt' its alot cheaper Rancho makes a great 2-3" suspension lift that will clear 33's RCD makes a great kit for clearing 33's with autotrac. Or just get 285 and only rub when you hit a hard dip.

08-04-2003, 12:51 PM	#11
9teen69 Registered User Join Date: Sep 2002 Location: Austin, Texas Posts: 1,048	O' - The bummer is I do have "auto-trac". Local shop quoted me $1700 for a 6" and $900 to install plus $600 for driveshafts due to auto-trac. $3200 + another $1220 for rims & tires really isn't an option since I have too many vehicles needing paint I have 265's now and really don't want to put those back on. A $150.00 2" body lift is looking real good if I can put 33's on it. __________________ 72 Cheyenne SWB C10 (daily driver) (Super fake cause I just love the glovebox emblem) 70 Camaro RS (frame-off in pieces) 70 Camaro RS (daily driver backup) 69 Custom LWB C10 (son now drives)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.