IA Oil line fitting that screws into rear of block - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**LockDoc** · 01-07-2014, 09:45 PM

-
I have a few new fittings that screw into the oil pressure port on the GM blocks. It’s for the 1/8” line that goes to the oil pressure gauge. These fittings have the compression cap nut on them as you can see in the picture. Some oil lines have this type and some have the sleeve nut as shown in the fourth picture. If your line has the sleeve nut on the engine end of the line you can still use this connector by cutting off the sleeve nut and sliding the cap nut and compression sleeve onto the line. This fitting includes the three pieces as seen in pictures 2 & 3. They are $5 each + $1.50 postage, until postal rates go up on the 26th, then the postage will be more… PayPal or Money Order works for me.

Per board rules post in thread before sending any PM's

Thanks,
LockDoc

flashed · 01-07-2014, 10:00 PM

I will take one if I can send you a Money Order .

darkhorse970 · 01-07-2014, 10:14 PM

I will take 2.

**LockDoc** · 01-07-2014, 11:23 PM

Quote:

Originally Posted by flashed

I will take one if I can send you a Money Order .

Money order is fine. PM sent.

Quote:

Originally Posted by darkhorse970

I will take 2.

PM sent.

LockDoc

flashed · 01-07-2014, 11:46 PM

PM returned ,on its way tomorrow .
Thanks John

**jocko** · 01-07-2014, 11:55 PM

Leon, if you have 2 left, I'd like to buy. Pls pm me paypal and the total (not sure if it's $11.50 or $13.00 - either way is fine). Thank you.

**jocko** · 01-08-2014, 01:24 AM

payment sent Leon, thx.

REEDS 72 · 01-08-2014, 07:09 AM

All take one thanks

**LockDoc** · 01-08-2014, 11:40 AM

Quote:

Originally Posted by REEDS 72

All take one thanks

PM with info sent.

LockDoc

flashed · 01-08-2014, 08:17 PM

Leon ,payment is on its way .

**LockDoc** · 01-08-2014, 08:43 PM

Quote:

Originally Posted by flashed

Leon ,payment is on its way .

Thanks.

Darkhorse970 and Jocko's were mailed out this morning.

LockDoc

darkhorse970 · 01-10-2014, 09:14 PM

Got mine today, thanks Leon!

**jocko** · 01-11-2014, 07:29 PM

me too! Thanks Leon - perfect shape as usual.

**LockDoc** · 01-13-2014, 10:13 PM

Quote:

Originally Posted by darkhorse970

Got mine today, thanks Leon!

Quote:

Originally Posted by jocko

me too! Thanks Leon - perfect shape as usual

Thanks for letting me know they arrived OK guys...

Quote:

Originally Posted by flashed

Leon ,payment is on its way .

Received payment. Will mail it out in the morning.
I had to go out of town today. Thanks.

LockDoc

flashed · 01-19-2014, 10:31 PM

Leon ,I forgot to let you know mine came the other day .
Thanks again
John

**LockDoc** · 01-20-2014, 12:42 AM

Quote:

Originally Posted by flashed

Leon ,I forgot to let you know mine came the other day .
Thanks again
John

Sounds good. Thanks.
LockDoc

01-07-2014, 09:45 PM	#1
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,771	Oil line fitting that screws into rear of block - I have a few new fittings that screw into the oil pressure port on the GM blocks. It’s for the 1/8” line that goes to the oil pressure gauge. These fittings have the compression cap nut on them as you can see in the picture. Some oil lines have this type and some have the sleeve nut as shown in the fourth picture. If your line has the sleeve nut on the engine end of the line you can still use this connector by cutting off the sleeve nut and sliding the cap nut and compression sleeve onto the line. This fitting includes the three pieces as seen in pictures 2 & 3. They are $5 each + $1.50 postage, until postal rates go up on the 26th, then the postage will be more… PayPal or Money Order works for me. Per board rules post in thread before sending any PM's Thanks, LockDoc Attached Images __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - Last edited by LockDoc; 01-07-2014 at 09:54 PM.

01-07-2014, 10:00 PM	#2
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,724	Re: Oil line fitting that screws into rear of block I will take one if I can send you a Money Order .

01-07-2014, 10:14 PM	#3
darkhorse970 Registered User Join Date: May 2009 Location: Monroe, LA Posts: 2,104	Re: Oil line fitting that screws into rear of block I will take 2. __________________ Keith SOLD - 1963 C10 Short Fleet 350/700R4 4/6 drop 1967 GMC Super Custom - Short Fleet COPO concept w/427 BBC T-400 w/Doug Nash overdrive 4/6 Drop, Buddy Buckets, etc... Frame Off (In Progress) I call it "Vulgar Display of Power" 1980 Silverado Original paint 49k Original miles 4/6 drop Check out my build thread here: http://67-72chevytrucks.com/vboard/s...=1#post6209941

01-07-2014, 11:46 PM	#5
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,724	Re: Oil line fitting that screws into rear of block PM returned ,on its way tomorrow . Thanks John

01-07-2014, 11:55 PM	#6
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,975	Re: Oil line fitting that screws into rear of block Leon, if you have 2 left, I'd like to buy. Pls pm me paypal and the total (not sure if it's $11.50 or $13.00 - either way is fine). Thank you.

01-08-2014, 01:24 AM	#7
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,975	Re: Oil line fitting that screws into rear of block payment sent Leon, thx.

01-08-2014, 07:09 AM	#8
REEDS 72 Registered User Join Date: Apr 2011 Location: AMERICAN FORK, UTAH Posts: 535	Re: Oil line fitting that screws into rear of block All take one thanks

01-08-2014, 08:17 PM	#10
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,724	Re: Oil line fitting that screws into rear of block Leon ,payment is on its way .

01-10-2014, 09:14 PM	#12
darkhorse970 Registered User Join Date: May 2009 Location: Monroe, LA Posts: 2,104	Re: Oil line fitting that screws into rear of block Got mine today, thanks Leon! __________________ Keith SOLD - 1963 C10 Short Fleet 350/700R4 4/6 drop 1967 GMC Super Custom - Short Fleet COPO concept w/427 BBC T-400 w/Doug Nash overdrive 4/6 Drop, Buddy Buckets, etc... Frame Off (In Progress) I call it "Vulgar Display of Power" 1980 Silverado Original paint 49k Original miles 4/6 drop Check out my build thread here: http://67-72chevytrucks.com/vboard/s...=1#post6209941

01-11-2014, 07:29 PM	#13
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,975	Re: Oil line fitting that screws into rear of block me too! Thanks Leon - perfect shape as usual.

01-19-2014, 10:31 PM	#15
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,724	Re: Oil line fitting that screws into rear of block Leon ,I forgot to let you know mine came the other day . Thanks again John



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.