Canada 3M Woodgrain Instrument - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**driller35** · 01-15-2014, 07:03 PM

Brand new instrument panel woodgrain made by 3M 75.00 USA shipping included in price
woodgrain is protected by clearcoat film

**driller35** · 01-15-2014, 07:04 PM

beautiful piece

**leddzepp** · 01-15-2014, 07:42 PM

Does it have "di-noc" printed on the back?

**TBONE1964** · 01-15-2014, 08:35 PM

I am interested in this if leddzepp does not want it. I also need to know what type of bezel it is made for? OE or Aftermarket? There is a obvious difference on how it will fit.

If you can verify this information, I will be interested.

Thank you,
Tom

**driller35** · 01-15-2014, 09:15 PM

Hi leddzepp, no it does not say di-noc on back
print on back 3M 468 MP 200 MP Adhesive

**driller35** · 01-15-2014, 09:20 PM

Hi Tom , you say there is an obvious difference on fit, can u point that out to me , thanks Lloyd

**leddzepp** · 01-15-2014, 09:22 PM

Thanks for the info Driller. I will pass, good luck with the sale!

**TBONE1964** · 01-15-2014, 09:52 PM

Quote:

Originally Posted by driller35

Hi Tom , you say there is an obvious difference on fit, can u point that out to me , thanks Lloyd

Hi Lloyd,

If you hold it up to an aftermarket bezel it will fit really nice in some areas and not very nice at all around other areas. The reason is some of these wood grain appliques are cut from a template that was based off of a OE bezel. If the wood grain is cut based off of a aftermarket bezel it may fit better but the problem is there are several suppliers of aftermarket bezels and they all have these small differences.

I actually have one here now that will not fit correctly. It will be very noticeable around the battery and oil pressure gauge holes where the applique is the thinnest.

I also have some wood grain appliques that will not fit an OE bezel correctly. You can see how frustrating this can be and ask some people on here about there experience and you will have many chapters to read.

I wish you good luck with your sale but I will have to pass on it for now.

Thank you,
Tom

**driller35** · 01-15-2014, 10:04 PM

Thanks Tom, I will hold it up to my original dash in truck tomorrow as I have no aftermarket here to lay up against

**PICKMUP** · 01-15-2014, 10:21 PM

If you are working with this thick 3M style, like driller 35 has for sale, you can actually use a drum sander and finesse it to fit nicely. All of the other ones I have seen are just thin contact paper and cannot be sanded for clearance/fit. This is the best one I have seen and hard to find. mho

**71blksuper4x4** · 01-15-2014, 10:35 PM

I believe these fit the counterpart dashes. I bought a few from an outfit over the summer and they told me they fit the counterpart dash. Trevor

**driller35** · 01-16-2014, 12:23 PM

U could be rite Trevor, PickMup is correct it is a heavy material

**driller35** · 01-16-2014, 11:07 PM

ttt

**jocko** · 01-16-2014, 11:43 PM

if it is the heavy material and I needed it, I'd jump on this. nobody sells repop woodgrain bezels complete as repops that I'm aware of - the heavy woodgrain applique is kinda hard to come by - or at least it was for me. I paid a pretty penny for one of Cheyenne superman's bezels and it's worth it, but they aren't common. I don't need one right now - but if this is the stuff I'm thinking of, it is head and shoulders above the applique film. Might need tweakin as mentioned above.

**driller35** · 01-22-2014, 01:41 AM

ttt

70LonghornCST · 01-22-2014, 02:08 AM

TTT (Tell me how To pay for iT)
Sold!

**driller35** · 01-22-2014, 12:29 PM

Hi Richard, I have pmed you
Lloyd

70LonghornCST · 01-23-2014, 02:33 AM

Quote:

Originally Posted by driller35

Hi Richard, I have pmed you
Lloyd

Paypal sent. Thanks, Lloyd!
-Richard

**driller35** · 01-23-2014, 01:01 PM

Sold
Thanks Richard have will have this one on the way for you

Cheers Lloyd

70LonghornCST · 02-06-2014, 03:33 AM

Quote:

Originally Posted by PICKMUP

If you are working with this thick 3M style, like driller 35 has for sale, you can actually use a drum sander and finesse it to fit nicely. All of the other ones I have seen are just thin contact paper and cannot be sanded for clearance/fit. This is the best one I have seen and hard to find. mho

Thanks for the tip, Frank. I'm looking into a drum sander right after this post. It is a nice piece.

Quote:

Originally Posted by driller35

Sold
Thanks Richard have will have this one on the way for you

Cheers Lloyd

Lloyd,
The woodgrain looks awesome. With minimal effort, this will fit just like a glove and will look OEM and match my NOS glove box woodgrain applique perfectly. Thanks so much,
Richard

**driller35** · 02-07-2014, 01:26 AM

Good to hear Richard and glad the posties got it there in one piece
Cheers Lloyd

70LonghornCST · 02-07-2014, 02:11 AM

You're welcome, Lloyd. And with how well you packed the woodgrain, it could have fallen from the airplane onto my driveway and been just fine. The plexi-glass was a nice touch!
Thanks again,
Richard

01-15-2014, 07:03 PM	#1
driller35 Senior Member Join Date: Aug 2009 Location: Calgary,AB Posts: 323	3M Woodgrain Instrument Brand new instrument panel woodgrain made by 3M 75.00 USA shipping included in price woodgrain is protected by clearcoat film __________________ 72 Chev Cheyenne Super SB 4x4 350,4spd,buckets, tilt,tach,am-fm,extreme tow hooks,Canadian Model Production 1 of 52 SOLD 70 Chev CST, 350 auto, PS, PB, AC, tach

01-15-2014, 07:04 PM	#2
driller35 Senior Member Join Date: Aug 2009 Location: Calgary,AB Posts: 323	Re: 3M Woodgrain Instrument beautiful piece Attached Images __________________ 72 Chev Cheyenne Super SB 4x4 350,4spd,buckets, tilt,tach,am-fm,extreme tow hooks,Canadian Model Production 1 of 52 SOLD 70 Chev CST, 350 auto, PS, PB, AC, tach

01-15-2014, 07:42 PM	#3
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,995	Re: 3M Woodgrain Instrument Does it have "di-noc" printed on the back? __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man

01-15-2014, 08:35 PM	#4
TBONE1964 Cluster King Join Date: Nov 2012 Location: Junction City, OR Posts: 5,263	Re: 3M Woodgrain Instrument I am interested in this if leddzepp does not want it. I also need to know what type of bezel it is made for? OE or Aftermarket? There is a obvious difference on how it will fit. If you can verify this information, I will be interested. Thank you, Tom __________________ Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com I am also a dealer for Counterpart for gauge cluster parts only. Also see my facebook page, CG&C

01-15-2014, 09:15 PM	#5
driller35 Senior Member Join Date: Aug 2009 Location: Calgary,AB Posts: 323	Re: 3M Woodgrain Instrument Hi leddzepp, no it does not say di-noc on back print on back 3M 468 MP 200 MP Adhesive __________________ 72 Chev Cheyenne Super SB 4x4 350,4spd,buckets, tilt,tach,am-fm,extreme tow hooks,Canadian Model Production 1 of 52 SOLD 70 Chev CST, 350 auto, PS, PB, AC, tach

01-15-2014, 09:20 PM	#6
driller35 Senior Member Join Date: Aug 2009 Location: Calgary,AB Posts: 323	Re: 3M Woodgrain Instrument Hi Tom , you say there is an obvious difference on fit, can u point that out to me , thanks Lloyd __________________ 72 Chev Cheyenne Super SB 4x4 350,4spd,buckets, tilt,tach,am-fm,extreme tow hooks,Canadian Model Production 1 of 52 SOLD 70 Chev CST, 350 auto, PS, PB, AC, tach

01-15-2014, 09:22 PM	#7
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,995	Re: 3M Woodgrain Instrument Thanks for the info Driller. I will pass, good luck with the sale! __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man

01-15-2014, 10:04 PM	#9
driller35 Senior Member Join Date: Aug 2009 Location: Calgary,AB Posts: 323	Re: 3M Woodgrain Instrument Thanks Tom, I will hold it up to my original dash in truck tomorrow as I have no aftermarket here to lay up against __________________ 72 Chev Cheyenne Super SB 4x4 350,4spd,buckets, tilt,tach,am-fm,extreme tow hooks,Canadian Model Production 1 of 52 SOLD 70 Chev CST, 350 auto, PS, PB, AC, tach

01-15-2014, 10:21 PM	#10
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,125	Re: 3M Woodgrain Instrument If you are working with this thick 3M style, like driller 35 has for sale, you can actually use a drum sander and finesse it to fit nicely. All of the other ones I have seen are just thin contact paper and cannot be sanded for clearance/fit. This is the best one I have seen and hard to find. mho __________________ Email: frankeham@comcast.net Phone: 360-956-7170

01-15-2014, 10:35 PM	#11
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,151	Re: 3M Woodgrain Instrument I believe these fit the counterpart dashes. I bought a few from an outfit over the summer and they told me they fit the counterpart dash. Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

01-16-2014, 12:23 PM	#12
driller35 Senior Member Join Date: Aug 2009 Location: Calgary,AB Posts: 323	Re: 3M Woodgrain Instrument U could be rite Trevor, PickMup is correct it is a heavy material __________________ 72 Chev Cheyenne Super SB 4x4 350,4spd,buckets, tilt,tach,am-fm,extreme tow hooks,Canadian Model Production 1 of 52 SOLD 70 Chev CST, 350 auto, PS, PB, AC, tach

01-16-2014, 11:07 PM	#13
driller35 Senior Member Join Date: Aug 2009 Location: Calgary,AB Posts: 323	Re: 3M Woodgrain Instrument ttt __________________ 72 Chev Cheyenne Super SB 4x4 350,4spd,buckets, tilt,tach,am-fm,extreme tow hooks,Canadian Model Production 1 of 52 SOLD 70 Chev CST, 350 auto, PS, PB, AC, tach

01-16-2014, 11:43 PM	#14
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,942	Re: 3M Woodgrain Instrument if it is the heavy material and I needed it, I'd jump on this. nobody sells repop woodgrain bezels complete as repops that I'm aware of - the heavy woodgrain applique is kinda hard to come by - or at least it was for me. I paid a pretty penny for one of Cheyenne superman's bezels and it's worth it, but they aren't common. I don't need one right now - but if this is the stuff I'm thinking of, it is head and shoulders above the applique film. Might need tweakin as mentioned above.

01-22-2014, 01:41 AM	#15
driller35 Senior Member Join Date: Aug 2009 Location: Calgary,AB Posts: 323	Re: 3M Woodgrain Instrument ttt __________________ 72 Chev Cheyenne Super SB 4x4 350,4spd,buckets, tilt,tach,am-fm,extreme tow hooks,Canadian Model Production 1 of 52 SOLD 70 Chev CST, 350 auto, PS, PB, AC, tach

01-22-2014, 02:08 AM	#16
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: 3M Woodgrain Instrument TTT (Tell me how To pay for iT) Sold! __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal



Register or Log In To remove these advertisements.

01-22-2014, 12:29 PM	#17
driller35 Senior Member Join Date: Aug 2009 Location: Calgary,AB Posts: 323	Re: 3M Woodgrain Instrument Hi Richard, I have pmed you Lloyd __________________ 72 Chev Cheyenne Super SB 4x4 350,4spd,buckets, tilt,tach,am-fm,extreme tow hooks,Canadian Model Production 1 of 52 SOLD 70 Chev CST, 350 auto, PS, PB, AC, tach

01-23-2014, 01:01 PM	#19
driller35 Senior Member Join Date: Aug 2009 Location: Calgary,AB Posts: 323	Re: 3M Woodgrain Instrument Sold Thanks Richard have will have this one on the way for you Cheers Lloyd __________________ 72 Chev Cheyenne Super SB 4x4 350,4spd,buckets, tilt,tach,am-fm,extreme tow hooks,Canadian Model Production 1 of 52 SOLD 70 Chev CST, 350 auto, PS, PB, AC, tach

02-07-2014, 01:26 AM	#21
driller35 Senior Member Join Date: Aug 2009 Location: Calgary,AB Posts: 323	Re: 3M Woodgrain Instrument Good to hear Richard and glad the posties got it there in one piece Cheers Lloyd __________________ 72 Chev Cheyenne Super SB 4x4 350,4spd,buckets, tilt,tach,am-fm,extreme tow hooks,Canadian Model Production 1 of 52 SOLD 70 Chev CST, 350 auto, PS, PB, AC, tach

02-07-2014, 02:11 AM	#22
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: 3M Woodgrain Instrument You're welcome, Lloyd. And with how well you packed the woodgrain, it could have fallen from the airplane onto my driveway and been just fine. The plexi-glass was a nice touch! Thanks again, Richard __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal

Register or Log In To remove these advertisements.