KS Parting out a 72 Sierra Grande AC cab - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 01-22-2014, 02:40 PM

Sold the dash out of it here is what is left

outer AC box $40 plus shipping
cab roof $75 no shipping
I can cut cab sections out for $25 plus shipping each

teeitup · 01-22-2014, 02:41 PM

63

teeitup · 01-22-2014, 02:42 PM

68

teeitup · 01-22-2014, 02:42 PM

73

**karphan** · 01-22-2014, 03:44 PM

Randy, I'll take this gun rack too. Pm sent. Thanks, Dan

jmader · 01-22-2014, 04:30 PM

I need the firewall where the A/C box attaches on the outside. I'll post a pic of exactly what I am talking about when I get home tonight.

barracuda5K · 01-22-2014, 04:56 PM

this is barracuda 5k is whole cab for sale . email me if it is at barracuda5k @ yahoo.com thank you

teeitup · 01-22-2014, 04:58 PM

Dan, they are yours

jmander, let me know

barracuda5k, I cut the dash out of it so it would be tough to put another one back in it

Thanks Randy

barracuda5K · 01-22-2014, 05:20 PM

This is barracuda5k don't need dash. What about cowl section . Quote me on price & shipping charges. I live in pa can't find a/c cab parts here

burb71 · 01-22-2014, 05:22 PM

Randy is that rear of the cab paint divider trim?

If its in pretty good condition Ill take it.

jmader · 01-22-2014, 05:32 PM

I'm looking for this section. Is this the same cab as you posted in the Valentine's parts?

tx68 · 01-22-2014, 06:02 PM

Are the kick panels any good (upper and lower)? I'm in need of the whole panel from the floor up to the inner cowl. Of course, I don't know how easy (or difficult) it is to cut out.

teeitup · 01-22-2014, 06:41 PM

barracuda5k, sorry I do not ship anything that big

burb71, Steve, they look pretty good, I think they each have a small ding in them $15 plus shipping

jmader, $25 plus shipping for that piece

tx68, I will look at them, not sure about cutting them out either

Thanks Randy

jmader · 01-22-2014, 06:56 PM

Quote:

Originally Posted by teeitup

jmader, $25 plus shipping for that piece

I will take it. PM sent.

UP GRADE · 01-22-2014, 07:06 PM

Would u just sell the switch if so how much?

teeitup · 01-22-2014, 07:47 PM

jmader, I'll get it cut off hopefully Thurs

UP GRADE, sorry want to keep it with the setup

Thanks Randy

**Clatterville trolley** · 01-22-2014, 08:46 PM

How about the front upper section of roof - inside and outside - to where windshield opening is and across the whole width of cab? I just purchased a 1968 with that part rusted out completely across and flapping in the breeze when it hits a bump. Would probably want it to be cut toward the back about 12" from where two pieces are pinch welded together to hold windshield in place.
I know they reproduce this piece for just the inside, but thought it might be easier to replace if it was still in one piece (roof and inner headliner portion). Hope I have explained it well enough for you to understand what I am talking about.
Thanks, Jay

jmader · 01-22-2014, 08:53 PM

Quote:

Originally Posted by teeitup

jmader, I'll get it cut off hopefully Thurs

UP GRADE, sorry want to keep it with the setup

Thanks Randy

Sorry I don't understand? Did you read the PM I sent?

teeitup · 01-23-2014, 09:02 AM

Jay, I'll look at it today, I wouldn't be able to ship it. $75 for whole top

Jeremy, I'll get it cut out and shipping price hopefully today

Thanks Randy

**Clatterville trolley** · 01-23-2014, 09:33 AM

Quote:

Originally Posted by teeitup

Jay, I'll look at it today, I wouldn't be able to ship it. $75 for whole top.

Thanks Randy

Randy, I will take it at $75 and then if you can hold on to it for a while I will try to figure out how to get it picked up. Don't know of any trips I have planned out that direction right now, but who knows what might pop up.
Is that OK? Is PayPal OK for payment? Thanks, Jay

teeitup · 01-23-2014, 09:38 AM

Jay, let me get pics and make sure its OK
Thanks Randy

burb71 · 01-23-2014, 12:26 PM

Ill take the rear cab paint divider trim.

Shipped to FL 33901
JUST PM ME WHEN YOU HAVE A TOTAL

teeitup · 01-23-2014, 01:51 PM

Steve, I will get you a total asap, Thanks Randy

teeitup · 01-23-2014, 03:01 PM

patch panel

teeitup · 01-23-2014, 03:02 PM

jay, cab looks good, some surface rust in corners, no rot.

01-22-2014, 02:40 PM	#1
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Parting out a 72 Sierra Grande AC cab Sold the dash out of it here is what is left outer AC box $40 plus shipping cab roof $75 no shipping I can cut cab sections out for $25 plus shipping each Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-22-2014, 02:41 PM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting out a 72 Sierra Grande AC cab 63 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-22-2014, 02:42 PM	#3
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting out a 72 Sierra Grande AC cab 68 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-22-2014, 02:42 PM	#4
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting out a 72 Sierra Grande AC cab 73 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-22-2014, 03:44 PM	#5
karphan Senior Member Join Date: Nov 2010 Location: Sparks, NV Posts: 258	Re: Parting out a 72 Sierra Grande AC cab Randy, I'll take this gun rack too. Pm sent. Thanks, Dan

01-22-2014, 04:30 PM	#6
jmader Registered User Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,483	Re: Parting out a 72 Sierra Grande AC cab I need the firewall where the A/C box attaches on the outside. I'll post a pic of exactly what I am talking about when I get home tonight. __________________ 1949 Chevy 3100 Five Window 1964 Chevy C10 Lambrecht Auction project 1967 Chevy SWB K10 1967 GMC K15 Project Build thread- http://67-72chevytrucks.com/vboard/s...72#post6502772 1968 Chevy Anniversary K10 1991 K5 4" Lift 35's (the wife's toy)

01-22-2014, 04:56 PM	#7
barracuda5K Registered User Join Date: Jan 2014 Location: Harding Posts: 17	Re: Parting out a 72 Sierra Grande AC cab this is barracuda 5k is whole cab for sale . email me if it is at barracuda5k @ yahoo.com thank you

01-22-2014, 04:58 PM	#8
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting out a 72 Sierra Grande AC cab Dan, they are yours jmander, let me know barracuda5k, I cut the dash out of it so it would be tough to put another one back in it Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-22-2014, 05:20 PM	#9
barracuda5K Registered User Join Date: Jan 2014 Location: Harding Posts: 17	Re: Parting out a 72 Sierra Grande AC cab This is barracuda5k don't need dash. What about cowl section . Quote me on price & shipping charges. I live in pa can't find a/c cab parts here

01-22-2014, 05:22 PM	#10
burb71 Active Member Join Date: Oct 2002 Location: Ft. Myers, Fl Posts: 1,716	Re: Parting out a 72 Sierra Grande AC cab Randy is that rear of the cab paint divider trim? If its in pretty good condition Ill take it.

01-22-2014, 05:32 PM	#11
jmader Registered User Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,483	Re: Parting out a 72 Sierra Grande AC cab I'm looking for this section. Is this the same cab as you posted in the Valentine's parts? __________________ 1949 Chevy 3100 Five Window 1964 Chevy C10 Lambrecht Auction project 1967 Chevy SWB K10 1967 GMC K15 Project Build thread- http://67-72chevytrucks.com/vboard/s...72#post6502772 1968 Chevy Anniversary K10 1991 K5 4" Lift 35's (the wife's toy)

01-22-2014, 06:02 PM	#12
tx68 Registered User Join Date: Jan 2012 Location: Plano, TX Posts: 69	Re: Parting out a 72 Sierra Grande AC cab Are the kick panels any good (upper and lower)? I'm in need of the whole panel from the floor up to the inner cowl. Of course, I don't know how easy (or difficult) it is to cut out.

01-22-2014, 06:41 PM	#13
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting out a 72 Sierra Grande AC cab barracuda5k, sorry I do not ship anything that big burb71, Steve, they look pretty good, I think they each have a small ding in them $15 plus shipping jmader, $25 plus shipping for that piece tx68, I will look at them, not sure about cutting them out either Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-22-2014, 07:06 PM	#15
UP GRADE one set closer Join Date: Jul 2003 Location: Memphis TN. Posts: 722	Re: Parting out a 72 Sierra Grande AC cab Would u just sell the switch if so how much?

01-22-2014, 07:47 PM	#16
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting out a 72 Sierra Grande AC cab jmader, I'll get it cut off hopefully Thurs UP GRADE, sorry want to keep it with the setup Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

01-22-2014, 08:46 PM	#17
Clatterville trolley Senior Member Join Date: Apr 2013 Location: Columbia, MO Posts: 1,934	Re: Parting out a 72 Sierra Grande AC cab How about the front upper section of roof - inside and outside - to where windshield opening is and across the whole width of cab? I just purchased a 1968 with that part rusted out completely across and flapping in the breeze when it hits a bump. Would probably want it to be cut toward the back about 12" from where two pieces are pinch welded together to hold windshield in place. I know they reproduce this piece for just the inside, but thought it might be easier to replace if it was still in one piece (roof and inner headliner portion). Hope I have explained it well enough for you to understand what I am talking about. Thanks, Jay

01-23-2014, 09:02 AM	#19
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting out a 72 Sierra Grande AC cab Jay, I'll look at it today, I wouldn't be able to ship it. $75 for whole top Jeremy, I'll get it cut out and shipping price hopefully today Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-23-2014, 09:38 AM	#21
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting out a 72 Sierra Grande AC cab Jay, let me get pics and make sure its OK Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-23-2014, 12:26 PM	#22
burb71 Active Member Join Date: Oct 2002 Location: Ft. Myers, Fl Posts: 1,716	Re: Parting out a 72 Sierra Grande AC cab Ill take the rear cab paint divider trim. Shipped to FL 33901 JUST PM ME WHEN YOU HAVE A TOTAL

01-23-2014, 01:51 PM	#23
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting out a 72 Sierra Grande AC cab Steve, I will get you a total asap, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-23-2014, 03:01 PM	#24
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting out a 72 Sierra Grande AC cab patch panel Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-23-2014, 03:02 PM	#25
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting out a 72 Sierra Grande AC cab jay, cab looks good, some surface rust in corners, no rot. Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.