SC WTB: sbc exhaust manifolds - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72junky · 01-26-2014, 03:48 PM

WTB: 2 wheel drive ram horn manifolds.

Well, got mine back from bead blasting and one is cracked and I broke the other one last night trying to remove a broken stud...

So, wtb, stock angle back manifolds for 72 without A.I.R. ports. The number on the driver side (left) reads 8932473 not sure what the right side number is...

If anyone has a set or even just one i'd appreciate it. Please post a picture and price or pm me.

Thanks,

Brian

Vova · 01-27-2014, 02:15 AM

http://67-72chevytrucks.com/vboard/s...d.php?t=613686

**tll74** · 01-27-2014, 03:34 AM

I have a pair of nice ones. 100.00 plus shipping for a pair. I ffthe price works for you I'll post pics. Thanks, Tom

72junky · 01-27-2014, 09:29 AM

Vova: Thanks for the response. I saw yours, but, I'm looking for a set without the A.I.R. ports.

tll74: Thanks, I will let you know. I have a couple other leads I'm following up on that are closer. One question, are the studs any good, or will they need replaced?

Thanks,
Brian

Andy4639 · 01-27-2014, 04:40 PM

I have a set for $100.00. I just took my 305 out of the truck. I live about 30minutes out of Greenville in Liberty SC between Easley and Clemson. I think I may even have 3 of them.

**tll74** · 01-27-2014, 06:20 PM

They will have good studs or none with good threads in the manifold. I also acid dip these and media blast them. Thanks, Tom

**tll74** · 01-28-2014, 03:24 AM

here is a pic of my RH. I haven't cleaned up the LH yet.

jjzepplin · 01-28-2014, 07:07 AM

How bout this?
http://www.ebay.com/itm/370906437869...84.m1423.l2649

72junky · 01-28-2014, 10:16 AM

JJZeplin: thanks for the fbay lead, I saw them too. Unfortunately they are A.I.R. ported. you can see the extra holes on the top side views. I appreciate your time looking!

tll74 Wow, that's it, thanks for the picture it does look really nice! If I can find local and avoid coast to coast freight I will probably do that. Hope you understand. This was an unexpected expense on top of new harnesses that the PO hacked up... This thing is becoming a money pit...

Andy, we haven't met, wanted to make it to the get together Saturday to meet the neighbors, but, worked on the truck breaking stuff instead. I'd like to get back with you on yours since we are so close. sending pm.

Brian

72freak · 01-28-2014, 10:24 AM

Since you are starting fresh go ahead and get you some 2.5 ones. I put them on everything.
\

72junky · 01-28-2014, 10:38 AM

72Freak:

Any idea where I can find them? All the ones I've found are either straight down, old 'Vette, or have the castings on the front horn for alternator. I'm going the stock look even though the engine isn't.

72junky

**Grumpy old man** · 01-28-2014, 01:50 PM

There were 2 sets at Knoxville pull a part yesterday , I look tomorrow and see if I can pick them up , There also was a rust free 69 hood for $53.00 .

72junky · 02-03-2014, 10:02 AM

ttt

Grumpy Old Man: Were you able to find a price on the ones you saw at pull a part?

Andy: still waiting to hear back from you.

jmorri34 · 02-03-2014, 02:22 PM

I have these for sale if you want them.

**Grumpy old man** · 02-03-2014, 08:40 PM

Quote:

Originally Posted by jmorri34

I have these for sale if you want them.

These are not rams horn exhaust manifolds .they are worthless to most people .

i haven'thad a chance to get over to check the ones in the pull a part but i will asap ,

jmorri34 · 02-04-2014, 08:24 AM

Quote:

Originally Posted by Grumpy old man

These are not rams horn exhaust manifolds .they are worthless to most people .

i haven'thad a chance to get over to check the ones in the pull a part but i will asap ,

1. I did not call the "rams horns" on this thread
2. I said I have "these" for sale
3. Just because you think they are worthless not all people do

All I was doing was offering an option but thanks for your input grumpy old man!

72freak · 02-04-2014, 10:03 AM

Quote:

Originally Posted by jmorri34

1. I did not call the "rams horns" on this thread
2. I said I have "these" for sale
3. Just because you think they are worthless not all people do

All I was doing was offering an option but thanks for your input grumpy old man!

Agreed! These are correct for most SB square bodies.

72junky · 02-14-2014, 12:58 PM

tll74 PM sent

01-26-2014, 03:48 PM	#1
72junky Registered User Join Date: Jun 2008 Location: Greenville, South Carolina Posts: 150	WTB: sbc exhaust manifolds WTB: 2 wheel drive ram horn manifolds. Well, got mine back from bead blasting and one is cracked and I broke the other one last night trying to remove a broken stud... So, wtb, stock angle back manifolds for 72 without A.I.R. ports. The number on the driver side (left) reads 8932473 not sure what the right side number is... If anyone has a set or even just one i'd appreciate it. Please post a picture and price or pm me. Thanks, Brian __________________ 72junky *Don't worry my wife said it's ok.* '72 K10 custom/10 350/4spd,ps,pb,ac,tilt,tach,3:73 posi,buddy buckets - driver '72 Cheyenne/10 swb 355/th350,factory black, loaded and lowered - toy '72 Cheyenne/10 lwb, 350/th350,ps,pb,ac,tilt - current project build '72 K5 Blazer CST 350/th350,ps,pb,ac,tilt,tach,3:73 posi - project rust bucket -Unfortunately Sold plus 4 others too ashamed to post

01-27-2014, 02:15 AM	#2
Vova Registered User Join Date: Aug 2012 Location: Los gatos ca Posts: 1,299	Re: WTB: sbc exhaust manifolds http://67-72chevytrucks.com/vboard/s...d.php?t=613686

01-27-2014, 03:34 AM	#3
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: WTB: sbc exhaust manifolds I have a pair of nice ones. 100.00 plus shipping for a pair. I ffthe price works for you I'll post pics. Thanks, Tom __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

01-27-2014, 09:29 AM	#4
72junky Registered User Join Date: Jun 2008 Location: Greenville, South Carolina Posts: 150	Re: WTB: sbc exhaust manifolds Vova: Thanks for the response. I saw yours, but, I'm looking for a set without the A.I.R. ports. tll74: Thanks, I will let you know. I have a couple other leads I'm following up on that are closer. One question, are the studs any good, or will they need replaced? Thanks, Brian __________________ 72junky *Don't worry my wife said it's ok.* '72 K10 custom/10 350/4spd,ps,pb,ac,tilt,tach,3:73 posi,buddy buckets - driver '72 Cheyenne/10 swb 355/th350,factory black, loaded and lowered - toy '72 Cheyenne/10 lwb, 350/th350,ps,pb,ac,tilt - current project build '72 K5 Blazer CST 350/th350,ps,pb,ac,tilt,tach,3:73 posi - project rust bucket -Unfortunately Sold plus 4 others too ashamed to post

01-27-2014, 04:40 PM	#5
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: WTB: sbc exhaust manifolds I have a set for $100.00. I just took my 305 out of the truck. I live about 30minutes out of Greenville in Liberty SC between Easley and Clemson. I think I may even have 3 of them. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

01-27-2014, 06:20 PM	#6
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: WTB: sbc exhaust manifolds They will have good studs or none with good threads in the manifold. I also acid dip these and media blast them. Thanks, Tom __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

01-28-2014, 03:24 AM	#7
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: WTB: sbc exhaust manifolds here is a pic of my RH. I haven't cleaned up the LH yet. Attached Images __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

01-28-2014, 07:07 AM	#8
jjzepplin Registered User Join Date: Feb 2012 Location: Ruskin Florida Posts: 4,556	Re: WTB: sbc exhaust manifolds How bout this? http://www.ebay.com/itm/370906437869...84.m1423.l2649 __________________ 70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350

01-28-2014, 10:16 AM	#9
72junky Registered User Join Date: Jun 2008 Location: Greenville, South Carolina Posts: 150	Re: WTB: sbc exhaust manifolds JJZeplin: thanks for the fbay lead, I saw them too. Unfortunately they are A.I.R. ported. you can see the extra holes on the top side views. I appreciate your time looking! tll74 Wow, that's it, thanks for the picture it does look really nice! If I can find local and avoid coast to coast freight I will probably do that. Hope you understand. This was an unexpected expense on top of new harnesses that the PO hacked up... This thing is becoming a money pit... Andy, we haven't met, wanted to make it to the get together Saturday to meet the neighbors, but, worked on the truck breaking stuff instead. I'd like to get back with you on yours since we are so close. sending pm. Brian __________________ 72junky *Don't worry my wife said it's ok.* '72 K10 custom/10 350/4spd,ps,pb,ac,tilt,tach,3:73 posi,buddy buckets - driver '72 Cheyenne/10 swb 355/th350,factory black, loaded and lowered - toy '72 Cheyenne/10 lwb, 350/th350,ps,pb,ac,tilt - current project build '72 K5 Blazer CST 350/th350,ps,pb,ac,tilt,tach,3:73 posi - project rust bucket -Unfortunately Sold plus 4 others too ashamed to post

01-28-2014, 10:24 AM	#10
72freak Rottenwood Garage Member Join Date: May 2005 Location: Marietta, Georgia Posts: 4,321	Re: WTB: sbc exhaust manifolds Since you are starting fresh go ahead and get you some 2.5 ones. I put them on everything. \ __________________ 2004 Chevrolet Suburban C1500 2001 Chevrolet 2500HD Crew 6.0 1999 Harley Davidson Electra Glide 1972 Chevrolet C-20 Custom Camper "Dump Truck" 1972 Chevrolet C-20 Suburban "Big Green" 1969 Chevrolet C-50 Wedge Hauler "Leonidis" 1966 C-10 2x4 short fleet 327 4 speed "Race Truck" 1952 Plymouth Cranbrook "Rican" (my grandfathers) 1931 Ford Model A Coupe "Black Beauty" 1930 Ford Model A truck "Club Cab" 4x4 Rottenwood Garage and Speed Shop.....where everything must be racy! *It's not just a hobby..It's a LIFESTYLE!!!* Thanks for nothing Barrett-Jackson You cant fix stupid or teach accountability! Time wasters, looky Lous and tire kickers are everywhere!

01-28-2014, 10:38 AM	#11
72junky Registered User Join Date: Jun 2008 Location: Greenville, South Carolina Posts: 150	Re: WTB: sbc exhaust manifolds 72Freak: Any idea where I can find them? All the ones I've found are either straight down, old 'Vette, or have the castings on the front horn for alternator. I'm going the stock look even though the engine isn't. 72junky __________________ 72junky *Don't worry my wife said it's ok.* '72 K10 custom/10 350/4spd,ps,pb,ac,tilt,tach,3:73 posi,buddy buckets - driver '72 Cheyenne/10 swb 355/th350,factory black, loaded and lowered - toy '72 Cheyenne/10 lwb, 350/th350,ps,pb,ac,tilt - current project build '72 K5 Blazer CST 350/th350,ps,pb,ac,tilt,tach,3:73 posi - project rust bucket -Unfortunately Sold plus 4 others too ashamed to post

01-28-2014, 01:50 PM	#12
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: WTB: sbc exhaust manifolds There were 2 sets at Knoxville pull a part yesterday , I look tomorrow and see if I can pick them up , There also was a rust free 69 hood for $53.00 .

02-03-2014, 10:02 AM	#13
72junky Registered User Join Date: Jun 2008 Location: Greenville, South Carolina Posts: 150	Re: WTB: sbc exhaust manifolds ttt Grumpy Old Man: Were you able to find a price on the ones you saw at pull a part? Andy: still waiting to hear back from you. __________________ 72junky *Don't worry my wife said it's ok.* '72 K10 custom/10 350/4spd,ps,pb,ac,tilt,tach,3:73 posi,buddy buckets - driver '72 Cheyenne/10 swb 355/th350,factory black, loaded and lowered - toy '72 Cheyenne/10 lwb, 350/th350,ps,pb,ac,tilt - current project build '72 K5 Blazer CST 350/th350,ps,pb,ac,tilt,tach,3:73 posi - project rust bucket -Unfortunately Sold plus 4 others too ashamed to post

02-03-2014, 02:22 PM	#14
jmorri34 Registered User Join Date: Sep 2012 Location: Spring, Tx. Posts: 479	Re: WTB: sbc exhaust manifolds I have these for sale if you want them. Attached Images __________________ 1969 cst prostreet http://67-72chevytrucks.com/vboard/s...d.php?t=568661

02-14-2014, 12:58 PM	#18
72junky Registered User Join Date: Jun 2008 Location: Greenville, South Carolina Posts: 150	Re: WTB: sbc exhaust manifolds tll74 PM sent __________________ 72junky *Don't worry my wife said it's ok.* '72 K10 custom/10 350/4spd,ps,pb,ac,tilt,tach,3:73 posi,buddy buckets - driver '72 Cheyenne/10 swb 355/th350,factory black, loaded and lowered - toy '72 Cheyenne/10 lwb, 350/th350,ps,pb,ac,tilt - current project build '72 K5 Blazer CST 350/th350,ps,pb,ac,tilt,tach,3:73 posi - project rust bucket -Unfortunately Sold plus 4 others too ashamed to post



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.