TNT-MotorSports is now a Vendor for CPP - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ksbrktracer · 02-06-2014, 08:01 PM

TNT-MotorSports is now a Vendor for CPP.
If there is anything CPP you are looking for please give us a call ... We have access to the Complete product line

ksbrktracer · 02-13-2014, 11:37 PM

We can get anything out of there product line , Modular spindles ,Regular drop spindles , drop springs , trac bar , Big Brakes, Standard brakes , 5 or 6- lug rotors , Control arms , trailing arms , center crossmembers , Power steering setups, tilt columns etc ....... Be sure to give us a call.

boynton · 02-18-2014, 01:44 AM

Looking to drop in a 2009 LY6 6.0 with a 6L90. I would like to know what you have motor mount wise/stands (basically the stuff to go from crossmember to the block. I would like to keep my a/c compressor in the stock location and powersteering in the stock location if possible. if not brackets to relocate each. I am going into a 1970 SWB step-side close to stock ride height. I may end up with a '73-87 front cross member if that makes a difference. (quote for 70 and 73+cross member

ksbrktracer · 02-27-2014, 12:20 AM

Quote:

Originally Posted by boynton

Looking to drop in a 2009 LY6 6.0 with a 6L90. I would like to know what you have motor mount wise/stands (basically the stuff to go from crossmember to the block. I would like to keep my a/c compressor in the stock location and powersteering in the stock location if possible. if not brackets to relocate each. I am going into a 1970 SWB step-side close to stock ride height. I may end up with a '73-87 front cross member if that makes a difference. (quote for 70 and 73+cross member

Missed your question somehow ..... I will see what I can get for you tomorrow and let you know. I am pretty sure the crossmember will not make any difference. Correct me if I'm wrong , but that has low mount A-C compressor ?

boynton · 02-28-2014, 02:24 AM

Yes it is on the right (passenger) side

**Clyde65** · 02-28-2014, 09:33 AM

This might work for you..

http://www.ebay.com/itm/like/261309364202?lpid=82

It is for a 63-66 but I think will easily fit a 70.

Also you would need a different manifold for a stock compressor to fit and I am not sure it will without trimming some on your frame.

For stock (LSx) ac compressor I used Docs Bloks, but I dont think they are available any more...try this one..

http://www.acsource.com/hoseblockhor...oringtype.aspx

ksbrktracer · 02-28-2014, 01:05 PM

Quote:

Originally Posted by boynton

Looking to drop in a 2009 LY6 6.0 with a 6L90. I would like to know what you have motor mount wise/stands (basically the stuff to go from crossmember to the block. I would like to keep my a/c compressor in the stock location and powersteering in the stock location if possible. if not brackets to relocate each. I am going into a 1970 SWB step-side close to stock ride height. I may end up with a '73-87 front cross member if that makes a difference. (quote for 70 and 73+cross member

PM Sent

djgebert · 02-28-2014, 01:42 PM

I am interested on a price for a 3/5 lowering kit. The CPP part number is Part #6372CSSK-D.

ksbrktracer · 03-01-2014, 12:24 AM

Quote:

Originally Posted by djgebert

I am interested on a price for a 3/5 lowering kit. The CPP part number is Part #6372CSSK-D.

I will try and have that price for you in the morning

ksbrktracer · 03-01-2014, 12:27 AM

Just got some modular spindles in today. Really nice looking pieces .

YBNORML · 03-01-2014, 01:19 AM

Hey Tommy, can you get me a price for a set of upper/lower coil spring tubular control arms?

p_rubottom · 03-01-2014, 07:10 PM

Interested in the spindles, going to send a pm.

ksbrktracer · 03-02-2014, 12:06 AM

Quote:

Originally Posted by p_rubottom

Interested in the spindles, going to send a pm.

PM sent back

C10agent · 03-02-2014, 12:20 AM

Interested in a Rear Trac Bar and Shock Relocation Brackets.

Thanks, Neil

ksbrktracer · 03-02-2014, 12:31 AM

Quote:

Originally Posted by djgebert

I am interested on a price for a 3/5 lowering kit. The CPP part number is Part #6372CSSK-D.

I will have that for you on monday ...

Quote:

Originally Posted by YBNORML

Hey Tommy, can you get me a price for a set of upper/lower coil spring tubular control arms?

I will have that for you on monday ...

Quote:

Originally Posted by C10agent

Interested in a Rear Trac Bar and Shock Relocation Brackets.

Thanks, Neil

I believe I have shock relocators already on there way for the shop inventory , I will have to get you pricing and get back to you .

Number98 · 03-09-2014, 08:15 PM

Any specials on a set of upper and lower A-arms for coil spring for a 70?

C10_ustacould · 03-11-2014, 03:44 AM

What can you do on a set of Modular drop spindles for 63-70? Shipped to 32578 of course.

calvin78612 · 03-13-2014, 02:08 PM

Price for modular spindles for 72 gmc shipped to 76008.

ksbrktracer · 03-13-2014, 02:23 PM

I'm in Dallas right now , heading home , I will try have pricing either tonight or in the morning possibly

C10_ustacould · 03-13-2014, 05:26 PM

Quote:

Originally Posted by ksbrktracer

I'm in Dallas right now , heading home , I will try have pricing either tonight or in the morning possibly

No worries, safe travels!!

C10agent · 03-15-2014, 09:45 AM

Curious if you were able to get those prices together. Thanks, Neil

70c10stepper · 03-18-2014, 09:32 PM

Pm sent.

70c10stepper · 03-20-2014, 12:32 PM

Any pricing yet?

70c10stepper · 03-22-2014, 10:47 AM

Anybody having any luck getting pricing back???
Please post your experience.

ksbrktracer · 03-22-2014, 11:18 AM

Quote:

Originally Posted by 70c10stepper

Anybody having any luck getting pricing back???
Please post your experience.

PM Sent

Also for anyone requesting prices , I have been traveling about 1500 miles a week here lately. Best way to catch me is too call .... # is my Cell phone. Apologize for delay in getting back to you.

02-06-2014, 08:01 PM	#1
ksbrktracer TNT-MOTORSPORTS Join Date: Mar 2008 Location: TULSA OKLAHOMA Posts: 2,692	TNT-MotorSports is now a Vendor for CPP TNT-MotorSports is now a Vendor for CPP. If there is anything CPP you are looking for please give us a call ... We have access to the Complete product line Attached Images

02-13-2014, 11:37 PM	#2
ksbrktracer TNT-MOTORSPORTS Join Date: Mar 2008 Location: TULSA OKLAHOMA Posts: 2,692	Re: TNT-MotorSports is now a Vendor for CPP We can get anything out of there product line , Modular spindles ,Regular drop spindles , drop springs , trac bar , Big Brakes, Standard brakes , 5 or 6- lug rotors , Control arms , trailing arms , center crossmembers , Power steering setups, tilt columns etc ....... Be sure to give us a call.

02-18-2014, 01:44 AM	#3
boynton Registered User Join Date: Feb 2012 Location: Salado, Texas Posts: 1,418	Re: TNT-MotorSports is now a Vendor for CPP Looking to drop in a 2009 LY6 6.0 with a 6L90. I would like to know what you have motor mount wise/stands (basically the stuff to go from crossmember to the block. I would like to keep my a/c compressor in the stock location and powersteering in the stock location if possible. if not brackets to relocate each. I am going into a 1970 SWB step-side close to stock ride height. I may end up with a '73-87 front cross member if that makes a difference. (quote for 70 and 73+cross member __________________ Just trying to figure this out... 1970 SWB Step-Side http://67-72chevytrucks.com/vboard/s...d.php?t=552980 1970 LWB http://67-72chevytrucks.com/vboard/s...d.php?t=584499 1970 SWB One Owner Step Side 6.0 LY6/6L90 http://67-72chevytrucks.com/vboard/s...d.php?t=617630 Junkyard's 1971 short wide http://67-72chevytrucks.com/vboard/s...86#post7531186

02-28-2014, 02:24 AM	#5
boynton Registered User Join Date: Feb 2012 Location: Salado, Texas Posts: 1,418	Re: TNT-MotorSports is now a Vendor for CPP Yes it is on the right (passenger) side __________________ Just trying to figure this out... 1970 SWB Step-Side http://67-72chevytrucks.com/vboard/s...d.php?t=552980 1970 LWB http://67-72chevytrucks.com/vboard/s...d.php?t=584499 1970 SWB One Owner Step Side 6.0 LY6/6L90 http://67-72chevytrucks.com/vboard/s...d.php?t=617630 Junkyard's 1971 short wide http://67-72chevytrucks.com/vboard/s...86#post7531186

02-28-2014, 01:42 PM	#8
djgebert Registered User Join Date: Jan 2008 Location: Fort Wayne, Indiana Posts: 197	Re: TNT-MotorSports is now a Vendor for CPP I am interested on a price for a 3/5 lowering kit. The CPP part number is Part #6372CSSK-D.

02-28-2014, 09:33 AM	#6
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,540	Re: TNT-MotorSports is now a Vendor for CPP This might work for you.. http://www.ebay.com/itm/like/261309364202?lpid=82 It is for a 63-66 but I think will easily fit a 70. Also you would need a different manifold for a stock compressor to fit and I am not sure it will without trimming some on your frame. For stock (LSx) ac compressor I used Docs Bloks, but I dont think they are available any more...try this one.. http://www.acsource.com/hoseblockhor...oringtype.aspx __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

03-01-2014, 12:27 AM	#10
ksbrktracer TNT-MOTORSPORTS Join Date: Mar 2008 Location: TULSA OKLAHOMA Posts: 2,692	Re: TNT-MotorSports is now a Vendor for CPP Just got some modular spindles in today. Really nice looking pieces . Attached Images

03-01-2014, 01:19 AM	#11
YBNORML Registered User Join Date: May 2010 Location: Edmonton, Alberta Posts: 3,847	Re: TNT-MotorSports is now a Vendor for CPP Hey Tommy, can you get me a price for a set of upper/lower coil spring tubular control arms? __________________ --------------------------------------------------------------- Jason. 68’ GMC shortbox https://67-72chevytrucks.com/vboard/...d.php?t=794201 72' 2WD Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=425385 67' LongBox C-10 http://67-72chevytrucks.com/vboard/s...d.php?t=691845 InstaGram ybnorml67

03-01-2014, 07:10 PM	#12
p_rubottom Registered User Join Date: Aug 2007 Location: Kansas Posts: 366	Re: TNT-MotorSports is now a Vendor for CPP Interested in the spindles, going to send a pm.

03-02-2014, 12:20 AM	#14
C10agent Registered User Join Date: Aug 2013 Location: Navasota, TX Posts: 708	Re: TNT-MotorSports is now a Vendor for CPP Interested in a Rear Trac Bar and Shock Relocation Brackets. Thanks, Neil __________________ Neil............... 1972 C10 SWB - Shop Truck in the Works 5.3 LS / Full Air Ride / Rear Notch 20" American Racing Daytonas IG - neilioustx - pictures of build/progress Born and Raised in the Promised Land.... TEXAS Y'ALL!!

03-09-2014, 08:15 PM	#16
Number98 Prestige Worldwide Join Date: Feb 2001 Location: Worldwide Posts: 2,553	Re: TNT-MotorSports is now a Vendor for CPP Any specials on a set of upper and lower A-arms for coil spring for a 70?

03-11-2014, 03:44 AM	#17
C10_ustacould A day late and $1 short... Join Date: Dec 2008 Location: Northwest FL Posts: 3,870	Re: TNT-MotorSports is now a Vendor for CPP What can you do on a set of Modular drop spindles for 63-70? Shipped to 32578 of course. __________________ Buck Instagram: C10_ustacould 1963 SWB Fleet Side 528 Desert Beige Milly 1967 SWB Step Side 506 Medium Blue The Old Girl 1968 SWB Fleet Side 503 Light Green Ellie SOLD 1965 SWB Fleet Side 507 Light Blue Prescription Strength SOLD 1971 SWB Fleet Side 521 White Shiro SOLD 1968 SWB Step Side 503 Light Green My Old Farm Truck SOLD

03-13-2014, 02:08 PM	#18
calvin78612 Registered User Join Date: Mar 2010 Location: Aledo, Texas Posts: 803	Re: TNT-MotorSports is now a Vendor for CPP Price for modular spindles for 72 gmc shipped to 76008. __________________ 84 step side 87 swb

03-13-2014, 02:23 PM	#19
ksbrktracer TNT-MOTORSPORTS Join Date: Mar 2008 Location: TULSA OKLAHOMA Posts: 2,692	Re: TNT-MotorSports is now a Vendor for CPP I'm in Dallas right now , heading home , I will try have pricing either tonight or in the morning possibly

03-15-2014, 09:45 AM	#21
C10agent Registered User Join Date: Aug 2013 Location: Navasota, TX Posts: 708	Re: TNT-MotorSports is now a Vendor for CPP Curious if you were able to get those prices together. Thanks, Neil __________________ Neil............... 1972 C10 SWB - Shop Truck in the Works 5.3 LS / Full Air Ride / Rear Notch 20" American Racing Daytonas IG - neilioustx - pictures of build/progress Born and Raised in the Promised Land.... TEXAS Y'ALL!!



Register or Log In To remove these advertisements.

03-18-2014, 09:32 PM	#22
70c10stepper Registered User Join Date: Apr 2013 Location: Iuka, MS Posts: 22	Re: TNT-MotorSports is now a Vendor for CPP Pm sent.

03-20-2014, 12:32 PM	#23
70c10stepper Registered User Join Date: Apr 2013 Location: Iuka, MS Posts: 22	Re: TNT-MotorSports is now a Vendor for CPP Any pricing yet?

03-22-2014, 10:47 AM	#24
70c10stepper Registered User Join Date: Apr 2013 Location: Iuka, MS Posts: 22	Re: TNT-MotorSports is now a Vendor for CPP Anybody having any luck getting pricing back??? Please post your experience.

Register or Log In To remove these advertisements.